Installation of an attic window: the most recent installation instructions. Do-it-yourself housekeeping of the attic dahu

With the large dimensions of the attic on top of the window on the pediment, do not give sufficient illumination, which eliminates the problem of their installation in the dahu. If it is correct to choose and install, then, for the firmness of fahivtsiv, the application will take 40% of the supplementary light. There are other indications: ventilation, aesthetics.

Up to the windows at the slopes of the dahu, part of such a stench, the songs of vimogi hang: mity, pereskodzhannya penetration of the water, good thermal insulation. There may be particularities in installation, nedotrimannya rules to produce until the tightness is broken. After knowing about the installation of attic windows with your own hands, I will become sensible and accessible.

Features of the attic dahu - pouring into the installed windows

For vikoristannya pokrіvelnogo expanse y budіvlі vykonuєtsya for singing rules. Її skati є walls of accommodation. The stench is supplemented with a heat-insulating material from the sound waters of the sound and parity in the middle. Obov'yazkovo peredbachaє ventilation. The cover comes out with a bagatosharovoy, through which the alarmists called similar constructions “pie”.

Scheme of a pokrivelny pie

For outdoor lighting, all the attic, which occupies a great place, vlast vіkna in the house. If the installation is installed at once from the daily life of the booth, otherwise there is no heat insulation, so the work is simpler. At the necessary place, they swear. But often the design is already ready, and then it is necessary to open the door to the bagatospheric pyrosis.

Vlastuvannya vikna

Now such a world of shoes are put on attic windows. The stench is also guilty of good deeds and curls, to stand up to various dangerous atmospheric attacks. To that, before the choice of constructions, the following is suitable:

• vikoristovuvati zagartovane slo or triplex;
• the presence of an energy-saving element, which allows light to pass through;
• obov'yazkovі hermetic sealing linings;
• a metal frame that resists hair and ultraviolet;
• switch over to ventilation, ventilation in coma, shading.

Soft cover - ce synthetic waterproof cover, available for processing and cutting. All operations with the installation of a window are beaten with a gostri knife and a saw. Support rails are mounted on screws. High qualifications are not needed, it is important to trim the accuracy and accuracy, follow the instructions described in the passport. Pardons are caused more importantly by insulation and waterproofing.

Dahi with metal tiles, corrugated board, gnushka is synthetic similar to the design. M'yake pokrittya cut with an electric jigsaw and scissors for metal. Like ceramic tiles or slate on the cover, the material is often removed, and then installed in a new way. Otherwise, the opening will be installed the same way.

High vimogi hang up to the crocks. It is ideal to stand between okremimi elements, if you enter into the open space and small allowances are left, on average 4 cm.

Vymogi to vikonnih constructions - dorimuvatisya obov'yazkovo

The unusual way and place of installation - under the shackle of the schili dahu - allow for the special power of the vibrations that are mounted. The stench is bigger skhilni to the negative infusion of the golden middle, lower roztashovani vertically. The main role of windows in the attic is to ensure the maximum supply of light, saving heat at the same time. Properly installed constructions hang the next little bits of accommodation.

Vykoristovuyutsya are specially designed for this variety, as well as zvichayny facade, stained glass, combination, domery. The stench is aware of the great ambition, that which becomes an element of Dahu. It’s the same on them, like a cover, pour in wind, wood, snow. For this reason, important for window frames are tightness, exact measurements, saving hardness, resistance to temperature changes.

Traditionally, for the preparation of zastosovuetsya whole tree and glued timber. Vіn building service is a trivial term, do not be afraid of sudden changes in weather minds, increased moisture. From modern materials of wide width, PVC profile. Aluminium, supplemented with plastic inserts, are the least populated.

Structural elements

Supplementary salary, appointments for the protection of the warehouse and the introduction of falling, the tightness of the sealing of the cover. It is made of aluminium, covered with light-coloured farboa or middling. Vіn is practically unremarkable, the parties are often hovayutsya under the material of the scheme. Vykoristovuyuchi spetsializovanі oklady, to carry out the association of vicons of the group, raztashovani horizontally, vertically or in a combined way.

You also need aprons for zahistu vіd vologa and bet, zholob vіd protіkannya. Mustache accessories are selected from one picker. Irrespective of the similarity, the models may have special features, a variety of equipment. This moment is especially important for a good salary. May you type one line, otherwise there is a risk, as if the detail is not correct.

For a light-transparent element, the promotion of wisdom is important, the vaga is small. Sound vikoristovuєtsya single-chamber sklopaket. In order to secure additional security, the material is secured. Zastosovuєtsya so slo, scho maє teplovidbivne pokrittya, dvosharovoe mіtsne. Okremі vіrobniki vіkonnih konstruktsіy zapovnyuyut skolpaketі inert gas, through scho move teplozberіgayusі building.

The shoes provide good ventilation. On some models, special valves are installed, on others - filters and additional anti-condensation attachments. Vіkna is guilty. Systems rely on vibir in different ways: expansion, turning, combinations and others. What is the reason for succumbing - to lie in the form of opportunities and the success of the ruler.

Vіdpovіdne mіsce - faktori, scho to add to vibіr

The work begins with the designation of the design. In the correctness to lie down a further result: tightness of the dahu, її outward appearance, internal improvement. Іsnuyut dіlyanki, de installation nebazhan:

1. 1. Roll, scho utvoryuyut roszholobok, in which accumulated snow. If you want to carry out the installation here, it will be impossible to open it all the time, the vologer will penetrate into the room.
2. 2. Mіstsya prikannya to the walls, de sozbirayutsya opad. Dodatkova unhandiness - permanent shading.
3. 3. The dilyanka was entrusted with ventilation channels and chimneys. The stench is to spray the condensed water.

Fakhіvtsі recommend roztashovuvati dormer vіkna podali vіd any constructive knots on the dakha. The ideal place is a slope, where there is plenty of free space. It is important that we do not destroy the functional power of the Dahu, the integrity of the installation.

Properly selected height ensures a good look around

The installation of dormer-windows on the basis of ready-made coverings is being built for the dormant minds. Covered material is accepted to respect. If wine is soft, then choose whether it is a place for the improvement of visionary guidance. Yogo is cut without special zusili, with which the hermeticity of the Dahu is not broken, and that splendid look. Call for a different approach, metal tile and similar to it should be covered: installation should be carried out, trying not to damage the line.

Vіkonnu design rozmіshchayut mizh krokvam

Particular respect for the need to stand between the beds: ideal option, if there is more for the size of the windows by a sprat of centimeters. In the space, which is left over, heat-insulating material is laid. In case of insufficient supply, make changes: an additional beam is added. For the sake of a good beginner, it is important for a non-professional. It’s better to look into a similar operation, and instead of one great century, install two smaller ones.

Vrakhovuyut sche kіlka factors. Attach a scorch to increase the efficiency of the plant and install it under the window. For the battery, the possibility of connecting pipes is transferred, for connecting an electrical outbuilding, a socket is needed. It is also important to roztashuvannya handles for vіdkrivannya. As it is installed at the top, the lower edge is not lifted higher, lower 1.1 m.

Dimensions of the window opening

On roztashuvannya attic vіkna vplivaє kut nahil slope. On steep slopes, the best place for installation is uphill, on gentle slopes - at the bottom. Vіd pіdlogi vіsot to become at times 0.8 - 1.3 m. For example, ceramic tiles are not crushed, but with sheet material I can do the operation, but if possible, try not to break the row and wind.

Installation of structures - technology and sequence

The installation is started from the design and construction. Fallow depending on the parameters: the type of varieties, their expansions, the number of windows to choose. It is important to correctly indicate the necessary slope area. Good lighting, safe and sound, according to article 1:10, independent from the form.

Robots are carried out manually, if there are internal improvements. Apply tags to the waterproofing in the application. On them they gave a view of a victorious opening. Fastening zdіysnyuєtsya on krokvah and mounting bar. There is a lower riven, vіdstupat 9 cm, as a profiled cover, and 5 cm for a flat one. From the top point of the window, draw a line through 10 divs.

Vashtuvannya open, installation and regulation frame

Measure the waterproofing diagonally from the outer edge with a margin of 20 cm. Know chi vir_zayut pokrіvelne pokrittya. 2 cm come out of the crock and remove the slats.

Do dahu robyat open

At the lower part of the opening, nail the mounting beam of the zavtovshka 5 cm, it can be larger. Display horizontally, perevіryayuchi equal. The lower end of the waterproofing sheet is attached to the new one with staples, and the upper one - to the grating. Bichni krai win the names.

Do-it-yourself do-it-yourself do-it-yourself installation of attic windows is similar, but there may be some details in the private sector, which should be taken from a virobnik company. Brackets for fastening in some cases are fixed on the crocks, in others - additionally on the armor. Therefore, they respectfully read the instructions of the virobnik and finish it.

So that nothing mattered during installation, they took a chair and a salary, as if they were already installed. The bare frame is left, on which brackets are fastened at the places assigned to it. Heat insulation is nailed to the upper part of the box with a stapler. At the bottom, it is laid on a beam and fixed with a frame inserted into the opening.

Installation of a vicon box

The lower fastening is twisted up to the stop, and the upper one is still not tightened to the end - in front of the regulation of the position of the box for help. Install a chair, wonder, shob lied down to the frame from the sides, but the same space. If necessary, check immediately, otherwise you won’t see it for a year. Then we tighten the reinforcement, fix the mineral wool on the frame, and cut it off. Bіchnі open zapovnyuyut warming.

Zovnishnya waterproofing and salary - selection according to the rules

The viconna design is bathed at once from an apron, and when it is bazhann, it is spun from a clear material. For this installation of the beast, the opening is seen to be rebated to a width equal to the size of the drainage gutter. In the middle, install a waterproofing slab and install a water-resistant element under it, install battens at the gap. Now fall down, don’t spend it on the window, but stick it with a zholob.

Installation of waterproofing

They open the apron and open it for a while at the opening in such a manner that it didn’t leak through the windows. Staples from the stapler are fastened to the frame, mounting beam, crocks, armor, and to wind up the edges. Top roztashovuyut under the drainage gutter. Turn the covering material on the plate. We fix the salary from the bottom, then we install the sidewalls, the upper part.

The design of the vіkonny opening is completed with overlays. Fallow in the virobnik, є svoї osoblivostі installation, that orienting point є іnstruktsіya іrmi. Vіkna Roto will secure the humovy ushchіlnyuvach on the ramі, pіd іd аlіvе а salary.

Salary installation

The Fakro firm took another way: the fastening is attached to the frame, and the space is fixed under decorative overlays. Diligently stick all the parts, tie them with a box and armor. At the end, an element is installed on the salary, which ensures a better fit of the covering material.

Seal the sticks between the window opening and the frame, vicorist special sealant. Mounting pin is suitable here. In the middle of the attic space, insulated mowings are installed. Start from the bottom, which is strictly horizontal, then the sidewalls and the top. Obov'yazkove vikoristanny elastic ushchіlnyuvach.

The installation of attic windows is completed. For a detailed understanding of the process, please familiarize yourself with the video material.

In the rest of the hour, more and more popularity is gaining budding with a mansard top, which allows you to most economically vicory the square. In the space of the attic there are bedrooms, cabinets, children's rooms, as well as kitchens, bathrooms and bathrooms. Given the large squares of the attic windows near the gables, the house is not built to provide sufficient lighting space. To solve this problem, it is possible to install dormer-windows at the skhil dahu. Fahіvtsі stverdzhuyut, scho correctly chosen and installed in the attic window lets in 40% more light. Until then, the airing of the premises will improve. That attic itself looks more aesthetically pleasing, more comfortable. Bagatyokh housekeepers sing food, like installing an attic window. Let’s move right away, on the right it’s not easy and even more convincing. In case of correctness of the installation, the leaktightness of the dahu is stale. Therefore, you don’t want surprises at the sight of a wind blown, or the penetration of a cold wind, rather, turn to certification of fahivtsiv, like a great fortune. For whatever reasons, you can’t, or you don’t want to get professionals, try to read the instructions of the vicon picker clearly. Within the framework of this article, mi rozpovimo, like a vikna, that fundamental technology of their installation.

See the attic windows

On the attic floor you can install windows of various views. The simplest - vertical windows yakі little chim vіdznyayutsya vіd zvichaynyh vіkon frontal slіnnya. The stench is installed either at the pediment, or in the scheme of the house in a special wine construction, they are also called a house or a spatula. Such windows look aesthetically pleasing, they give a good-looking look to the Dahu, but they let in little light.

Pohili attic windows- a daily cry to the elements of nature. The stench is mounted at the right time with the scale of the dahu, let through by 30 - 40% more than the sony light and is aired with the construction, the material and the method of ventilation.

For the production of attic vicons, a high-yielding wood is used, PVC - a profile or aluminum. Wooden windows are recommended to be installed in bedrooms, offices and other rooms from a normal level of moisture. And the axis of the bathrooms and kitchens is better to install plastic windows, as the stench is bigger than the stems to moisture, splashing that aggressive middle.

The design of the attic window may have some specific features, which may be used to classify them:

• Standard windows of rectangular or square shape. The vikoristovuyutsya most often, they are folded with frames and chairs or a deaf sklopaket. Before speech, attic windows with a deaf sklopaket are only allowed to be fixed, and the axis of windows with swivel chairs in various modifications of the market.

• Balcony windowsє construction from a frail window in the schili dahu and a vertical window under it and sometimes to the side. Offensive vikna vіdkrivayutsya: pohily - uphill, and the lower vertical killer (like a great one) or down. Tse allow you to go to the balcony.

• The lower element under the pokhili viknom. It is deaf at the end under the chair, which opens up. A similar design wins out in that vein, as if the height of the scheme does not rise in order to install two windows: one above the other, and one at the same time a little illuminating the space.
• Extensions - top element. As a rule, this is a decorative element above a frail window, which can be rounded or tricoutly shaped. Vykoristovuetsya for the harmony podednannya.

• Cornice windows they are installed in that mood, as if there is a high wall in the attic, which does not allow normal marveling in the window, which is sick. Even under the window, the window is installed vertically, as it also opens up. A similar design allows you to look at the landscape from the attic window, like a splendid one.

• Light tunnel we still have victors rarely, ale vin tezh may be there. It is installed in the place of the stingray, as it cannot have direct contact with the premises, for example, the mountain. There is a light-filled tunnel in the sky, most of all a pipe that leads to the month, as it is necessary to see. Here a plafond is installed, which is evenly roaring light.

All types of dormer-windows are made at specially owned factories and tested for quality at special installations. Yakіsnі materials, high technology, fittings that ensure safe turning and opening, but do not allow leakage, all the same guaranteeing functionality and safety. So, the number of such windows is not small, but work attic windows with your own hands are not varto. The stench can't provide proper comfort and airtightness.

According to the method of opening the attic window, it is divided into:

• From the central line to the turn of the chair. Can be rotated 180 °, which allows you to easily mitigate the slope.

• From the lifted vіssyu turn. The whole is folded approximately 2/3 of the way to the bottom of the window.

• With a combined turn. Includes both the central and the lower all. The upper one allows you to turn the name up to the top of 45 °, and the central one allows you to scroll all the way.

• From the big sky turn. They are known as zvichayny vykna, they are also called mansard hatches, because the stench is vicarious for going out to the dachas.
• From the lower vіssyu turn less chairs for balcony windows are released. The stench yells forward.

• With remote care. In the high attics, where there is no possibility to open the window manually, the remote control of the recreation center is to be used, which works on the electric power lines. In such a state of mind before him, as if building a mansard, it is necessary to lead a line to the restoration of the city.

When choosing an attic window, the structure of the window should be considered, the strength of the window and the parameters of the attic room. For example, the height of the attic so nahily schilu dahu pours into those, on which height it is necessary to set up a window, and what a glance will be done.

Vlastuvannya attic windows

The attic is a complex design, even if it happens to be operated in folding minds: wood, wind, hail, snow, and the same roztashuvannya under the hood. In order to secure the quality of the vikna, the vineyards of the vicorist grow in a special way, the building vitrimat the great vice.

The attic window is folded ramieі chairs, as well as fittings, which allows you to turn the chair at different positions and fix it. The chairs have a cladding bag filled with inert gas.

Ale cream tsogo is also included in the kit waterproofingі vapor barrier aprons, drainage chute, sob niknuty prot_kannya, thermal insulation so necessary in our harsh climate, and bad salary, which protects the elements of the window from the floor and directs the water down to the covering material, as well as internal mowing.

The versatility of the installation of the attic window is rich in why it is necessary to lie down in obsyagu robit, as if it were possible for vikonati, that kind of visibility of quiet chi іnshih elements in the kit.

Before that, how to take care of the attic window, follow a professional, correctly pick up the salary for the new one, depending on the type of cover and accessories for protection from the sun, wind, growth, roller blinds and more.

Do-it-yourself installation of attic vicons

We repeat once again, it is better to ask for the installation of attic windows at certified fahivtsiv, so that later it will not be more painful. Well, if you want to entrust the order to the guards or the buddy brigade, how to make houses for you, ask them for help, which the stench robbed earlier. It often happens that alarm clocks, without knowing it, take on attic windows, and then we have to rework everything.

Certified facsimiles, the coordinates of which you can find out from the representatives of the vicon maker, work out everything soundly, acquiring technology. On the installed attic windows, the price should be laid down depending on the fact that it is covered with a covering material, that all the covering works have been completed, and that only they are at the stage of everyday life. Although the covering material has not yet been laid, the internal work is not worn, the installation will be cheap.

Well, as you already know, all the work was done independently;

Select the attic window and place for installation

Rosemary of the attic window is chosen from the improvement of the area of ​​the attic and between the roofs. More often, it will be installed between the roofs, without changing the structure.

Vіdpovіdno to zagalnyh rules, vіkno may be buti schonay less than 10% of the area of ​​the attic. The width of the window may be 4 - 6 cm less than the width between the beds. If you have too small a window, for example, 60 cm, and a window is necessary large, put two windows in order, in the sudan sections between the beds.

Important! Two windows give more light, one more light.

The height of the rotting of the vіkna to lay down the vіd kuta nakhil schilu dahu that vіd mіstsya roztashuvannya of the pens on the vіknі. So, on steep slopes, it is better to roztashovuvat below, and on gentle slopes - on the contrary - uphill. The optimal height of the attic window is 80 - 130 cm, including underlays. If the handle is located on the top of the hill, it is installed at a height of 100 - 110 cm, and if it is at the bottom - 120 - 130 cm. For example, as if it were ceramic tiles, they cannot be pierced, but it is necessary to place them strictly over a row of tiles. And as a sheet material, in a new one you can see the opening in any place.

Important! Do not forget to mention that in order to secure the attic window for cooling, sweating and condensation, it is necessary to install a scorching tool under it.

Choose the type of attic window opening, depending on the degree of operation.

In addition, as they were appointed from the kіlkіst vykon, їkh rozmіrami that mіsce roztashuvannya, znache tsі mіstsya zsrediny attic.

Correctly pick up a salary for an attic window. Irrespective of those that all attic windows are approximately the same, all the same, the skin virobnik has its own peculiarities, different equipment. Choose all the accessories of one maker of one line (they will be indicated on the marking), discuss in advance with the manager by phone, clarify what you are saying, what the set is, what is not possible.

Preparation of the site for the installation of the attic window

Let's look at the option, if it's already ready, but there are no internal cuts. In such a situation, on the waterproofing swimmer in the middle of the place, we are going to roztashuvannya windows. Vіdstan z bokіv maє buti 2 - 3 cm Mounting on the roof and on the lower mounting beam. We use the lower lining of the window, available 9 cm for profiled roofing materials or 4 - 6 cm for flat ones. Significantly the upper point of the vіkna and vіdklaєmo sche 9 - 15 cm on the hill.

Virizable waterproofing material, leaving a margin of 20 cm from the sides. The canvas, which has been lost, is still lit up in the middle of the attic. Znіmaєmo pokrіvelne pokrittya or virіzaєmo.

Visibly reshetuvannya, vіdstupshi vіd krokv 2 cm.

The lower edge of the waterproofing is fixed with a stapler to the mounting beam. The upper edge - to the upper reshetuvannya. Lateral vityagaєmo name.

Insertion of ramie (boxes): adjustment, alignment

In the delivery kit you will find instructions on how to install the attic windows on your own picker. Treat yourself її. On the right, in what the windows look like. In some, the brackets are straight-cut and fasten only to the cracks; First of all, the stench clings to the frame of vіkna at a different position. That is why it is so important to discuss the food with the manager of the company.

The installation of attic windows Velyuks, Fakro, Roto and others is similar in the upper positions, but it is strongly disturbed in the privacy.

For example, on the Fakro windows on the frame there are grooves with the signs V and N, which indicate the depth of the planting of the window. Won to lie down according to the type of covering material and salary.

For ease of installation, the chair must be removed. As a reminder, it will be indicated in the instructions before the end of the day. Likewise, a salary has been established on the vіknі, yogo is also known. Let's fill the bare frame.

Fixing brackets are installed on the frame for the designated area. Let's sweat on the upper part of the frame with thermal insulation (mineral wool) and fix it with a stapler.

At the bottom of the window, heat insulation is laid on the mounting bar and then we install the frame in the opening, pressing the insulation to the bar.

The lower brackets are fixed tightly, and the upper brackets are not to the end, we still have a chance to lightly lift the frame. We install a chair on the table, close it and marvel at what is peroxide. Adjustable yogo for the help of the upper reinforcement. It is important for us that the window stood perfectly, the chair leaned on the sides the same way, and the gap was the same. Nadalі tse correct not see.

After the regulation is tightened, all the strengthening of the mіtsno, as well as the bіchnі to the krokv. Different virobniks have a stench of vikonan in a different way. Krypimo bіchnu waterproofing to ramie vіkna, forming a curtain. Dali is laid at the side, open the insulation.

Installation of waterproofing near the attic window

The kit with an attic window has an insulating apron. Behind the bazhannyam you can vikoristovuvat self-confident, from hand-bought material.

Above the future window, you can see from both sides of the slats, which is equal to the width of the drainage chute. Pіdrіzaєmo here, in the middle, waterproofing plіvku. We start under it the drainage chute and install it in the gap between the armor. In this order, the water of the beast flows from the waterproofing into the gutter, and not into the window.

We open the apron and lay it down for a long time in such a way as to secure the structure and the air. Close with a stapler to the frame, mounting beam, crock and upper grating, start up the edges of the grating. The upper edge of the apron is wound up under the drainage chute.

Installation of the salary of the attic window

Installation of the salary starts from the bottom of the hill. We will install the lower corrugated apron in front of us, then the side parts, the upper one, and in the rest of the line there will be slips on the window.

Lay down the different pickers for your particular installation, and follow the instructions for that. For example, the Roto window may have a special humic booster on the frame, which will start and the salary will be fixed. This way the wine tightness is ensured. And there is no such improvement from the Fakro vicons, the salary increases without intermediary to ramie, and the animal is crippled with additional elements of the salary, like grabbing the place of the day rami and the salary.

Relatively, all parts of the salary are fixed and fixed until the frame is settled.

The lower apron is fastened to the animal to the covering material.

In the remaining part of the frame for the installation of the covering material, a special element is attached to the salary, to which the covering material is attached.

That's it, you can hang a chair and know how to cover it. The attic is ready. At the end, I would like to note that for sealing the sticks between the frame and the opening at the same time, it is not possible to beat the mounting pin, only special sealants. And in the middle of the attic, it is necessary to install mowing, the lower one is vertically, and the upper one is horizontal. So be sure of the best circulation of the hot air, which goes out of the scorching radiator. We warm each other every time, we don’t sweat it all the time. І do not forget about the insulation of the slopes.

Installing an attic window: video instruction

The room, possessed on the mountain, is called an attic. Її lived in Paris in the 1630s and the relevance of this architectural solution was not spent, moreover, due to the improvement of the expansion of the obligations of the zamіs'kogo everyday life, it would gradually zastosovuєtsya.

Attic design

The design of the attic is determined by the type of roofing itself. Historically, it turned out that the best option for the profile of a dahu for cladding an attic room is the same as the ranks of dahu. On the little one is shown the spіvvіdnoshnja obsjagu tsgogo prismіshchennya v vypadku z dvoskhilim ta lamanim.

With an indefatigable eye, it is clear that the rosemary rose under the lamanim dash, the greater lower under the two-shil. It can also be seen that it is larger behind the square, the lower one, as if it was stashed on the first version, it evoked the peculiarity of the design of the booth itself. That yoga sprat.

Attic frame without insulation

The spore of the attic room is transferred, which automatically becomes an invisible part of the structure covering. Tobto beams, like going to the preparation of the walls and the stelovoy overlap of the attic, take on themselves the burden of the construction of the roof, the rolyachs of the mіtsnіshoy and stіykіshoy.

For the preparation of the attic in a frame booth, it is necessary to put in the same materials, as if they were vikoristan, when the main walls and the stele overlap the first on top.

Tobto, as for the walls, a stagnant beam of 150x50 mm, the same is to blame for vikorostani when cladding the attic room.

As a support, under the wall timber, the lags of the stele overlap are first on top. Fastening zdіysnyuєtsya for help of flowers, or a little bit of wood screws. As the very creak of the beams, the forgetter himself chooses, walking out of his own knowledge of that knowledge.

Subtle everyday life

To make life easier for weekday workers, it is necessary to improve victories, through this it is necessary to bring victorious victories, as they are recognized for victoria in the attic. One more moment, which can make life easier for a forgetful person, if there is insufficient natural ventilation, then it is necessary to get used to it by entering a well-created primus ventilation in the attic. In addition, foldable roofing causes increased labor intensity during cladding, heat and waterproofing. And yet, all the folds are transcended by a gracious looking booth with a mansard cottage, that kind of room can’t be wound up in any way.

Carrying elements of the attic frame

To the non-bearing elements of the attic room, you can bring in the heat, as if they were lined for lining the walls and the stele, as well as for the warmth of the vapor barrier of the room itself. In this way, you may need to fold an additional frame on vertically installed beams to the frame of the walls of the room. For the dressing of the room, sound the vicorist lining, the smut, which, when nailed, it is unacceptable to get into the slots of the shmatochkі in thermal insulation.

Attic insulation

Robots, poov'yazanі z pov'yazanimi z sing folds, and she herself will make a labor worker and foldable and deyakі zabudovniks to go to the broken order of the robit, with the method of the quick work.

Tovshchina insulate to lay down in addition, in some part of our region there will be houses, as if we are talking about the middle smuga of Russia, the best would be to use a heat-insulating mat with a thickness of 150 mm.

To insulate the dahu in any way, such a material is suitable as basalt wool or its analogue.

Deyakі maistri zastosovuyut. On the cover of the day, be some kind of covering material, only when you need to remember that the materials are used, as a matter of permanent ventilation, to which metal tiles and their analogues are brought. In other words, the zabudovnik will be responsible for ensuring a gap of 20-30 mm between the metal tile and the tile that covers the heat insulation.

Pirіg pokrіvlі

Theoretically, for the maintenance of all thin lines and, as a matter of fact, the work of the roof, it is necessary to let the water through and the condensate does not settle. Even though blemishes were allowed during the glazing, then condensate, which, having settled under the tiles, settles on the surface of the slab, it does not allow you to spend the middle of the insulation. And after a deaky hour, wine is just dry.

Insulation is placed between the layers and even if the width of the board is smaller for the thickness of the heat-insulating mat, then you can either nail an additional bar on the roof, or fix the sheet with drywall, and in this way the surface of the sheet and the mat is due to be separated by special steam insulating paper. Such a design guarantees the safety of normal vapor permeability, in other words, steam, which is settled as a result of the difference in room temperatures, and the inner ball of insulation is deposited on the surface of the paper and is progressively evaporated. For the safety of yoga vaporization between insulating it with a ball of waterproofing, it is necessary to close the gap of about 10-15 mm, otherwise the steam can be seen.

One more small detail, for a guaranteed view of the bet, the horse is cold, for which you can have small glances at the pediment, such a pidhid allows the condensate to sink into the cold.

Vikna

The attic room is small, natural lighting is enough to control the windows. Before that, how to make a decision, how to make a decision, how to make a decision, how to set up a sky, need to remember about those who are victorious, roztashovane in the country, forever letting in more light.

At the entrance to the attic, one day of great expansion will give the light of three less than two small ones installed on a small window, one view of one. For greater efficiency, it is necessary to protect the growth of the people, as if living in this room.

When rozrahunku area vіkna can vikoristovuvat empirіchnuyu formula, tobto vyvedenu pіdstavі practical evidence. Ideally, the ratio is 1 to 8, so for the area of ​​​​the room 16 square meters, the area of ​​​​the window can become 2 and more square meters.

Vіkna at the attic

The windows in the attic are located in the space between the roofs and they are installed at the same time with a roof. The viconna frame can be creaked without intermediary up to the crochet.

If the width of the cut is smaller, the width of the cut of the cut is lower, then it is necessary to prepare a grating for the cut, so that you can fill the additional drill on the cut and, if necessary, install a support beam. If the width of the window is changed, then it is possible either to grow the virizi in the windows, or to install the grating under the window, in such a rank, as shown in the little one below

Constructive cover

Balcony

Balcony maidanchik for the attic can be controlled by dekіlkom in ways, from the side of the pediment or slope.

To vlashtuvannya balconies from the side pokrіvl maistry vikoristovuyut combination vіkno-balcony. This design is shown a little below. It will be installed behind these very rules, just like everything else.

Vіkno-balcony at the attic

The balcony on the side of the pediment may be the mother of a sprig of vikonan, for example, the wall of the pediment vlastovuetsya on the vіdstanі two-three krokіv krokv, and on the mіstsі, scho zvіlnilosya, veiled pіdloga and vrіven zі vіzіzom pokrіvlі install railing.

Balcony under the floor

Even if it is necessary to build a wine balcony, then even if there is an overhead overlap, it is possible to carry the beams to the necessary dovzhina. To the point, for the promotion of the superstition of such a construction, it is not necessary to set up a supporting footing under it, just as it is shown in the little picture below.

Balcony

Projects of houses with an attic

And the whole project is a house of 6 by 4 meters, a total area of ​​​​zabudov - 24 m2. Outdoor area: 36 m2.

Budinok with mansard cover 6x4
Plan 1 on top and attic on top

We ask you to ask for a choice of kіlka.
For example, the first option. Budinok 6x6 meters, open area - 30 m2

Budinok with an attic and a veranda 6x9

More projects of frame houses with different area to marvel at the distribution of Projects of houses.

Video

We invite you to marvel at the video about the life of a booth with a mansard cover of self-care with a cover photo.

Good day, that cіkavogo reading!

Who would have thought for a moment that one of our school bachelors on a black-and-white graduate would show himself well from an unseen side.

For yoga roses, having presented the fathers with a luxurious house, and at once I will be climbing, moreover, from the attic.

They talked to him, robbing you, that it is possible to build a comfortable attic, as if to install a windshield. The idea was worthy of you, having turned around to us at the firm.

Otak i nagodzhuyutsya professional connections.

As a result of this idea, I recommend that you read the basic information about the features of their installation.

Installation of attic vicons - instructions:

Fallow in the form of a frozen covering material, architectural and heat-insulating minds of the attic window can be installed:

• at different depths (three equal landings): N (0 cm), V (-3 cm), J (-6 cm)
• on krokvah or reshetuvanni

1. Attic windows can be installed at the dahas with a shill of 15° to 90°.

The height of the installation may be sufficient, prote, vrakhovuyuchi mind and exploitation, look around and illumination of the room, as well as the daily norms, it is necessary to install the window so that the lower edge of the window is at the height of the PZ - 170 cm long logs.

The height of the installation is also to lie down in the kuta nakhil dahu and the expansion of the vіkna.

2. Vіkno may be installed above the tiles - under vіknom may there are celestials, not cutting a row of tiles.

If the cover is covered with a profiled cover material, it is necessary to install it on the recommended stand between the top edge of the cover and the bottom edge of the window.

If the cover is to be found on a significant vіdstanі vіd vіkna, it is necessary to install an additional row of the cover material.

If it is necessary to cover with a high-profile covering material, it is necessary to pierce or crypt the cover with such a rank, so as to incapacitate the damage of the lead apron to the salary.

• pіd viknom: 0-4 cm for flat covering materials at planting depth J - 14 cm;
• 10 cm for low-profile covering materials;
• 12 cm for high-profile covering materials;
• vzdovzh vikna: 3-6 cm;
• above window: 6-15 cm;

4. When mounting on the covers, it is possible to fasten up to the covers for additional mounting sleeves.

Vіdstan between the roofs may be similar to the width of the window and may be larger by 2-5 cm (for example, for a window with a width of 55 cm, it is optimal to grow between the roofs to become 57-60 cm).

Korisna's joy!

If you walk between the roofs and do not match the width of the window, it is necessary to change the design of the door.

In this case, obov'yazkovo give respect to those, so that the cross-beams are placed on the vіdpovіdnu vіdstan in the lower and upper edge of the vіkna for the correct internal improvement (above the vіknom - horizontally, under the vіknom - vertically).

5. Designate a window installed on the hydrobar. Open in the designated area with a margin of 10 cm from the skin side, then attach the hydrobar to the window box.

Wirіzati part of the sheathing at the prepared miste. To install the drainage gutter, cut out the fragments of the counter-lattice and cut the water barrier.

6. Remove from the package the aluminum profile lining 1 and 2. Remove the bottom profile lining 3 from the box, as well as transporting wooden bars.

7. Win a chair from a window box. For which it is necessary to install the window with the lower edge on the underside, it is easy to heal. Vіdkriti vikno that turn the chair 150 °.

Tightening the window in this position, for additional twisting, twist blocking screws in loops for three wraps behind the year's arrow.

8. Turn the chair out of the window directly to the designated point. Vikonuvat tsyu operation carefully, at once vyimayuchi stool z loops. Not dotrimannya tsієї wimogi can lead to loose loops.

9. Screw the mounting coils to the window box on a 10 cm window from the edge so that the stench is not smothered on the grate.

The rings of the window box have milled grooves marked with letters (N, V and J), which indicate the different depth of the window seating.

The skin groove is of the same type as the salary. At the salary type, the salary type (N, V or J) has the remaining letter, for example EZV 06.

Screw the mounting coils to the box in such a way that the figure on the peaceful line of the coil:

• vіdpovіdal comrade's reshetuvannya;
• zbіgalasya z groove vibranoї depth of landing vіkna.

The chosen landing depth of the window (N, V chi J) is due to the confirmation of the designation on the packing salary. The installation of a window in a house with a forced grating is carried out similarly to the installation of a window on the roofs.

10. Place the vicon box at the prepared place. The mounting coils are guilty of slumping on the beds. Verify that the groove is running on the window box with the upper plane of the crate.

For help, turn over the horizontal of the lower edge of the window. At the time of consumption, placing a wedge under the coil, install a horizontal line. Screw only the lower folds with screws to the crochet.

11. Insert the stool in the window into the window box.

For whom it is necessary:

• take the chair up to your hands, tobto. ovnіshnіm slope to yourself, and the bottom of the vіkna burn down;
• stretching the chair at the vertical position, put її bells at the loop evenly without skew;
• twist the blocking screw on three wraps of the anti-year arrow and close the window.

12. Vіdkriti і vіdkrіti stool and reverify the parallelism of the gap between the chair and the box at the bottom of the window. Attaching a plastic wedge with a set of fastenings under the upper mounting sleeve on the side of a smaller gap, use a non-parallelism.

13. Close the window and reverse the parallelism of the gap between the chair and the box from the sides. At times, you need to change the upper part of the box left-handed or right-handed, put in non-parallelism.

Screw with screws to the top crochet.

Get respect!

Just before the hour of everyday life, a hydrobarrier is stagnant, it is necessary to install a drainage chute over the window.

14. In that case, as if during the weekdays the water bar is stagnant, it is necessary to install a drainage chute for the introduction of the water in the preparation of the place above the window, which condenses, in the direction of the window, and also attach the water bar to the window ї boxes.

15. Revisit the superiority of robotics. For models that can be ventilated, the grate must be re-opened.

dzherelo: leroymerlin.ru

The company ProfMarket is glad to invite you to buy attic windows, the price of the yak is available to the skin type of the best varieties, wholesale and retail.

If you decide to buy attic plastic windows, our company will ask you to choose the best variety and wide choice, and our professional consultants will give you an opinion on all your food products in the Profmarket catalog.

Attic windows are called windows, the installation of which is done right at the roof.

At the same time, attic windows are needed not only for illumination of the sub-creative space, but also for protection from atmospheric phenomena.

Otzhe, attic windows - not a constructive part of the Dahu. Zvajayuchi on the basis of the stench is to blame for all vimogams, characteristic of non-bearing elements for superficiality, minerality, water impermeability.

The main feature of the mansard window and the third rosette is near the dahu square. Through yoga, the reinforcement of the structure will increase the vanity, even if it is possible to trim it all the time.

Dane vіkno vіdіznyаєєtsya vіd vіchaynyі vіdkrittya - along the central axis, although today's models have already been blamed for vіdkrivannym vіkі and the upper axis.

Such special features of the design allow you to easily open the door and make it easier to look around. And behind the help of unique fittings, the stool can be well fixed in any situation.

Windows for attics can be of different shapes, so that they can be laid out in the configuration of the cover, which allows you to repeat the virginity and originality.

It also has an additional universal mounting system and the availability of different configurations. The great building allows light to pass through and the small opening of windows provides better lighting.

Specially for different regions, they invented special cladding bags: for cold ones - rich balloons, energy-saving ones, for speckled ones - mirrored, tinted, light-colored bins.

From a practical point of view, windows are often blocked with anti-condensation seals, anti-shock cladding bags that are self-cleaning, and in terms of decorative functions - stained glass windows or color slopes.

In addition, attic windows can be equipped with remote control and other external and internal systems.

Vіkna firmy Velyuks

The Velyuks company is famous for being famous for its unfinished quality of products, as to make your attic bright and calm.

The great success on the world market allows the company to gradually improve its products and reach new quality standards.

You can see the middle of the attic windows of the firms:

Vision of firm Fakro

The company Fakro manufactures attic windows from glued wood on the basis of high density pine. At the process of virobnitstva, the wood is treated with an antiseptic and covered with a lacquer warehouse 2 balls.

The sound of it is protected by an aluminum profile, covered with polyester.

At the middle of the chair, there are ruffled loops, which allow you to turn the window 180 ° and easily miti. Special zasuvka fix yoga in any position.

Zavdyaki ventilating solutions, like on all attic windows of Fakro, you can ventilate the premises in a closed camp.

The grille has an original design with good acoustic and filtering powers.

The handle on these vіknakh is ruffled at the bottom, so it's easier to open it without any additions. And yoga opening allows you to fix the design in 3 positions: closed, open and closed.

At the Fakro sklopaket, the staves are hardened to the impact of the skla.

The German company "ROTO-FRANK" vinayshla attic window Roto, as a building showcase the same vanity, that and cover. For rahunok їх osobliїї konstruktsії and salary (difference see pokrivlі) dots do not leak at all.

In these veconn designs, there are advantages, which allow them to be aired in їх in the form of vecons of other types:

• special fittings;
• vbudovani kutochki for installation;
• complete set with vapor barrier apron;
• ready thermal insulation block;
• chair adjustment after installation;
• the appearance of a supra-shaped ridge along the perimeter of the chair and the box.

Not long ago, the company "ROTO-FRANK" began viroblyatni attic windows of a new generation - Roto Designo. There is a unique design, a unique design, a modern decoration, a smooth shape of the overlays, a fastened fastening.

In addition, the palette of overlay colors has expanded, and anthracite metal has been added to standard colors. All necessary windows to cover are equipped with special fittings, locks and other elements.

Better attic windows: Velux, Fakro chi Roto

Warehouse order

Velux products are made from pivnіchnoї pine, which is also hardwood and stone material. Vaughn is an adhesive beam, covered with a fungicidal and lacquer warehouse (2 balls).

Get respect!

At povnyannі z reshtoyu vіkon tsі designsії vvazhayutsya more mіtsnimi and dovgovіchnymi.

Virobi Fakro is made from high density pine. The vikonan has a look of glued construction, leaked with an antiseptic warehouse (in the minds of a vacuum), and it is covered with polyacrylic varnish in 2 balls.

Vikna Roto. For the preparation of these dormer vicons, it is necessary to plant a pivnіchnu pine like a glued beam. The fallow type of wine model can be two or three balls with applied fungicidal seepage and lacquer coating.

Sklopaketi

Velux constructions are made of energy-saving cladding bags, prepared using modern technology of "warm perimeter".

The weakest place for sizable vicons is the perimeter, so the vikon frame is not made of traditional aluminum, but of thin-walled solid steel with rounded corners.

In the middle of the slopet of the attic window, an inert gas - argon, is removed, in the presence of some additional silicone sealing (replacement of butyl sealant). Sklopaketi vikon Velyuks zdatni vitrimati frost up to -55 degrees.

In the windows of Fakro, vicorous energy-saving claddings filled with argon are installed, after which the attic will be warm in the calm climate of the river.

Sami skla mayut podvischenu mіtsnіst, stіykі to extreme atmospheric phenomena. Zavdyaki special zabіzhniki sklopaket plundering vіd vіd vlyuvannya that evil.

Attic windows of Roto firms are folded from a single-chamber sklopaket, the fold of which is 4 mm thick. In the middle, argon (krypton) is pumped in, which ensures high thermal insulation.

Some models go through hardening to improve the characteristics of mentality.

Vіdkrivannya vіkon

The Velux constructions are easily lifted behind the help of the handles in the mountains. Zavdyaki tsomu can roztashovuvat їх at the optimal height (up to 110 cm from the ceiling), so as to provide a good look at any sedentary person, even if you want to stand.

Under the vіknom can roztashovuvatsya be-yakі objects іnter'єru, shards of the upper handle become accessible.

Attic windows Fakro for the help of handles and special zasuvok can be fixed at six positions. The handle is located at the bottom of the structure, which, obviously, is handy for low people, but it’s not safe for children and it’s not allowed to roztashuvat schos under the window.

Virobi Roto create a mechanism that allows you to turn them on two axes. Vidkrittya vikna on the upper axis vіdkrivaє miraculous glance and at the same hour will not let you get wet in rainy weather.

When choosing special fittings, you can block the chairs at 4 points, which will save you from evil.

Ventilation characteristics

All Velux models are equipped with ventilation attachments, and in some of them the handle is attached to a unique ventilation box.

These designs can achieve a high windage, which can be deposited in the world. In addition, all the stinks are equipped with a large filter, which acts as an antidote to the saw.

Attic windows of Facro and Roto firms may be similar to ventilation valves, but in the plan I will add three to the Velyuks firms.

Installation specifics

The Velux company has done everything, so there is nothing foldable in the installation of windows, and even in the installation process, only ready-made ones are selected, matching accessories for the size.

Zavdyaki him maximally reduced the amount of pardon and vіdmіnno protects against the cold, protіkannya, freezing. All attic windows manufactured by Velux are equipped with built-in brackets to facilitate the installation of curtains.

Vіkna Fakro can be mounted both on the screening and on the blood.

There is nothing collapsible in their installations, so it is not necessary to fit on the screening, even if it is not necessary to fit the crocks of the crucible constructions under the window opening.

Roto constructions are mounted easily and simply on different covers. The stench sticks to the sieve, but you can additionally fasten them on the lids of the cracks to the resting tufts.

tightness

Velux attic windows are equipped with a three-layer reinforced contour, which ideally protects from the drafts and heat losses. Such a unique system allows you to zastosovuvat їх practically in any region of the country.

Fakro constructions along the perimeter of the contour of the strengthener, which ensures a safe fit and saves heat loss.

Virobi Roto can also provide protection between screed packs and profiles that adhere to aluminum, which allow condensate to escape along the contour of the screed.

Accessories for vicons

The windows of all collections can be equipped with different accessories, but the Velux collections can have more decorative elements, lower others.

For example, to embellish the booths and to fill it with quiet different curtains, roller blinds, awnings, blinds, mosquito nets, a system of remote keruvannya (electrical, sleepy energy).

In this way, having looked at the 3 main varieties of attic windows, you can make a residual choice, which will only be left for you!

dzherelo: profmarket74.ru

Do-it-yourself installation of attic vicons

Installation of dormer-windows is necessary to carry out only for instructions and constant re-verification of the installation quality. Otherwise dah protikatime.

Until then, there are plenty of people to make pardons during independent installation, which also lead to deplorable consequences. Therefore, read and remember.

How to install correctly

To find out how to install the attic window correctly, follow the recommendations below:

1. Remember us in advance: the attic window is not fastened to the grating, but to the roof system (vertical roof beams).

2. As in the design of the crockery system, there are transverse horizontal beams, then the lower part of the window should be ruffled on them more quickly. You can also focus on the slats reshetuvannya.

3. Stand between a vein box and blood vessels, but not less than 3 cm from the skin side. Tsya v_dstan is necessary for virіvnyuvannya attic vіkna.

4. For ease of installation, you can install a horizontal beam under the lower part of the window to the roof system.

5. Installation of an attic window. Even the lower part of the vein and fasten the folds (not to the end) with screws (mayut boots in the kit).

6. Let’s try to align the longest day of the window parallel to the roofs and twist the self-tightening screws in the double openings on the corners of the fastening (it’s not until the end, so that it’s possible to adjust the position of the window box exactly).

7. If the attic window is already independent, it is necessary to change the position so that you stand between the frame and the sides of the bula approximately the same.

8. After the residual adjustment and re-wiring from the left sides, the bolts can be screwed in again.

Korisna's joy!

The waterproofing material is responsible for framing the window box with an overlap on the frame.

9. Laying waterproofing material. Vin is responsible for framing the viconna box with an overlap on the frame. The laying order is from the bottom of the hill.

On the back, the lower part of the material is pushed up to a frame with an overlap, at the side ledges, cuts are made to put them up to the dahu. Then we add white insulation sheets with an overlap on the frames.

The upper and lower protruding parts are attached to the bottom and to the animal and wind up under the first lower insulating sheet, and to the animal on the sidewall of the box.

The top sheet is stacked just like the bottom one, only on top of the sidewalls (notches on the edges to sag in such a way as to lay them on the side sheets). As a result, all the pieces of insulation pads are screwed one on one with screws.

10. If you have a profile cover, then before installing the salary under the attic window, it is necessary to nail a thin rail in order to fasten a soft corrugated apron onto it, which smoothly lies on the profile.

The rake roztashovuetsya on 10 cm in the bottom edge of the window box and protrudes from the sides by 30 cm.

11. Installed salaries. For the beginning, remember: as your linings are fixed with zasovki, clammers or zasuvki, then additional mechanical fastening (flowers, screws) is not needed.

As for insulation, the bottom salary is mounted on the back (burn on the cover). A fixing overlay for a dormer-window is put on a new animal. The salary and lining are closed for additional self-tapping screws, which are added, open in preparation.

The bichni sections of the lower salary are nailed to the frame with short flowers (2 cm). The bichni salaries are inserted at the lower salary until it stops (special nadrizi can be bent over the name of the reinforced reinforcement).

Bіchnі salaries are also nailed to the vіkonnoї box with flowers, and to the slatted or crochet for additional clasps.

If you have soft or flat cover, then you can take a little of the edge of the oklad, so as not to pick up the cover material.

Before the upper salary, it is necessary to install linings on the attic window and fasten them with screws through special openings. The upper salary is installed simply: from the sides it is screwed to the window with screws, to the crate it is fastened with clasps.

12. Even if you have soft or flat covering, її from the sides you can lay only on the salary for additional bituminous materials. The profile cover winds up on the sides so that it ends with a whole upper arc.

And it is necessary for the beast to cover the salary from the opening of the new 6-10 cm.

13. The lining stick with the covering material of the obov'yazkovo needs to be insulated with a sealant, which is included in the kit, or with another line, which is to be glued.

14. After the installation of the attic box, a chair is put on it (otherwise a sklopaket, as if it is deaf).

15. Insulation of windows can be carried out in the middle, along the perimeter (mineral wool) and curved to the condensate with a foil heat-insulating ball. On the three sides of the cuts, the insulation is also installed.

16. A vapor barrier is worn on the insulation. As a rule, on її kintsyah there are cleats for fixing up to the attic window.

At the places where the vapor barrier apron is used, it is possible to add additional fastening with screws or sealant.

As a rule, rough cuts are installed at the attic windows, as if the years are covered with arrogant amenities. It’s not easy to mow like this: you just need to cut out the dove, the width of that kuti for the upper tabby mowing.

Mows for knitted mansards are tied in such a way that the lower one looks down vertically, and the upper one horizontally. Mansardi with lamanim dahom can mother not be strong mowing.

Get respect!

Do not forget that under the attic window it may be scorched.

Varto vrakhovuvati, scho vіd rіznyh virobnikіv methods and installation of dormer windows can troch vіdіzniatisya. At the future world, we can look at them okremo.

Also, the ways of installing different types of attic windows and accessories will be considered.

dzherelo: gold-cottage.ru

Installation of attic windows

Attic windows are installed at the daha. Such windows are attached to the building, as well as the principles of installation and operation, and they are exactly inspected in front of the façade.

The main parameters that are included in the operation of attic windows:

• Budov pokrіvelnogo pie;
• correctly installed;
• operation during the winter period;
• microclimate.

Vashtuvannya pokrіvelny pie

Vіdpovіdno to іnstruktsіy bolshostі vіrobnіv іv pokrіvelіv іv, pokrіvelny pyіrіg, scho insulates, is guilty of folded from advancing balls (from top to bottom):

• pokrіvelne pokrittya (metal tile, gnuchka tile thinly)
• crate under the roof covering (successive or crochet; the installation of attic windows is installed on the whole ball)
• ventilation gap (most often it is fixed with a counter grid over a diffusion membrane)
• diffusion membrane (permeable pair in the middle of the application)
• wooden legs, insulated
• vapor barrier
• black pidshivannya

Report - div. virobnikov's instructions.

As a result, the installation of dormer-windows is caused by an incorrect covering layer (for example, an external ventilation gap), due to leakage in the area of ​​the windows, due to condensate cover.

Attic windows Velux, Fakro, Roto

Optimally, the installation of windows, such as Velyuks windows, Fakro chi Roto, was created by fakhivtsy, so that they can learn from this species and know the principles of the power of the pokrіvelny pie.

When choosing a contractor, the following should be given due respect to the company’s work, the number of partners, the existence of a contract, guarantees.

If you have tried to install attic windows of self-tightening or get installers without a certificate in this type of work, you need to familiarize yourself with the instructions, adding to the evening that other branded products.

The installation of windows will require preparation of the opening. The width of the opening for the installation of the attic window is due to the greater width of the window: for Velux - by 4 - 6 cm (shorter than 6 cm), Fakro - by 2 - 5 cm (shorter than 4 - 5 cm), Roto - by 6 - 7 cm ( shorter than 7 cm).

Obmezhennya for the height of the fallow in the form of mowing. For mowing the “opened” form (the lower edge is vertical, the upper one is horizontal), the cutting of the transverse planks is required.

For mowing perpendicular to the window, use cross planks between planks 4-6 cm higher than the height of the window (div. instructions for installation).

When installing the attic window, it is recommended to plan the mowing of the “opened” form, because Vіn I will improve the ventilation of the window and I will improve the lighting.

Set of vikonnoy boxes. The window box is installed behind additional brackets, which are included in the kit, on a lattice/solid basis, on which a cover is laid.

For the correct installation of the window of the attic window, it is necessary to align it in the plane. If the slope is not equal, under the brackets of the fixing it is possible to install wedges, so that they sound to be included in the kit.

Also, it is not possible to allow a bevel of a rectangular box. For this, it is necessary to install a turning part on it and align the window box along it.

Insulation, waterproofing around the window box. The viconna box sings out louder than the ball of insulation cover, it is important to properly insulate the "place" between the insulating dahu and the viconn box.

When installing an attic window, it is optimal to use the material to enter the warehouse of the installation package:

• Velux is a heat-insulating belt made of spun polyethylene.
• Fakro - insulation blocks from the outside
• Roto is a heat-insulating belt made of backed polyethylene.

When installing attic windows Velux or Fakro, the insulation of the house can be used for additional minvati, pinofol and other materials (it is not possible to fix the mounting pin), but it is also more foldable and can be brought to a change in the term of operation ї vikna.

Waterproofing around the window box is checked for the picker's instructions.

Installed salary. Vikonuetsya for the instructions of the picker, vіdrіznyаієє fallow in vіd pokrіvelny pokrittya. It is not possible to break the integrity of the slats of the salary (for example, drill with a screw when fixing metal tiles around the salary).

Insulation, vapor barrier of slopes. After the installation of the attic window, it is important to lay the insulation on the slopes, if you don’t thrive, the window can freeze. Before the installation of the frame, before the mowing, it is not possible to install a vapor barrier.

Korisna's joy!

After the installation of the attic window, it is important to lay the insulation on the slopes.

When installing firm cuts, the frame is not necessary, because ukіs trimaєtsya on the vіkonnіy box near the special groove.

This article may be informative in nature and not a helper in the installation of attic windows.

Remember: professional installation of windows is cheaper, lower reinstallation of an incorrectly installed one (especially in case of failures, if the elements of the window / salary / curves are bad).

A lot of vlasniks in the zamіsk budinkіv are trying to build from the attic for the full living accommodation. One thing that could help such accommodations is access to fresh air, as well as adequate lighting. Virishiti offended problems at once can be installed in the cover. Such a decision today is worthy of a not-so-popularity, and most of all, for this task, the military officers are encouraged to hire third-party victors more often, if they want to work independently. How to install an attic window?

Vlastuvannya attic windows

The delivery set usually includes the following accessories:

• awning or shutters for outdoor shading;
• salary for protection against negative atmospheric impacts;
• same vikno - closed hermetic system;
• waterproofing protector;
• internal mowing.

The standard set of attic windows includes a sklopaket, salary, frame, mowing, fittings.

Obviously, you can find modest sets for sale, but it is recommended to choose the option of embedding curtains. Through those that the design itself is roztashovuvatime under the hood, then the classic blackout can be ineffective.

Planning and rozrahunki

The installation of the attic window is ready to be covered due to start from the planning stage. Nasampered, it is necessary to calculate the necessary changes. The formula for milking a rose is simple: 1 square meter of skin 10 square meters of application.

It is also necessary to choose the height correctly, on which the installation of the windows is to be carried out. Roofing of the attic windows should be done in such a way that the lower part of the ramie hung 1-1.5 meters above the floor line.

The lower part of the ramie is guilty of buti vishchoy for rіven pіdlogi 1-1.5 m

Choose the place of installing the attic window into the metal tile, or else I will cover it and make it easy to work so that, if possible, do not get stuck during the installation of the roof system. The dimensions of the fault allow you to mount the window box between the covers and leave a margin of about 10 cm.

Robot plan and tool

Whether it’s the installation of an attic window in a soft cover or a metal tile, for any option, the installation instructions are here:

• preparation for the opening;
• ramie installation;
• heat and waterproofing;
• preparation of the drainage system;
• installation of salary parts;
• installation of a sklopaket;
• internal improvements, including installation of mowing and vapor barrier.

Do-it-yourself installation of attic windows with your own hands is a whole lot more feasible, but the maestro can’t do without a powerful tool:

• screwdriver and self-tapping screws;
• slats and beams from a tree;
• rіven;
• flowers;
• materials for heat and waterproofing.

Vikna installation

After that, as a place for the installation of dormer-windows will be collected, the next step is to decide on the planning of the Maidan for robot. Following the contour in the material, open the sprout of the opening for the expansion of the materials of the pokrivelny pie - to help them get lost in the process. Check the opening for an additional circulating or strechkovo file. It is important to cut along the diagonal, and not along the contour, after which you cut at the top of the tricots and only after that you form an opening.

The holes in the cover are molded behind the help of a circular file

Okremo next designate the work with covering material. The installation of attic windows near metal tiles is carried out in the same way, as well as in a slope with a corrugated board or a sheet bay. If you want to talk about attic windows with folded coverings or similar materials, then you need to pick up the lining of the back.

Installed ramie and regulation

Important: with the method of safety, rams are mounted without warehouses. It may be installed more or less at the final stages.

The installation of ramie is recommended to be carried out without a warehouse

When installing frames for roof windows, carefully fasten the lower brackets, and do not tighten the upper brackets to the end until the end - it will be easier to adjust the chair easily. Fight for help for help. As it is known, whether the insertion of the inserted veil is to be taken out, the next step is to put them in for additional plastic kutochkіv - these spare parts are often included before the delivery kit. It is also recommended to temporarily insert the fold at the frame, so that you can change the quality of the installation. As soon as the adjustment is completed, tighten the screws.

Isolation and drainage

In addition, as the fastening will be superficially flared, it is necessary to lay a warm waterproofing material for greater tightness. The fixation of the waterproofing apron is to be fixed behind the help of the stapler.

Waterproofing is fixed behind the help of a stapler

Drainage chute to fight at the upper part of the frames. At the slat, right above the opening, two shmats under the expansion of the drainage chute are visible. Similar rosemaries are prepared and made of waterproofing material. The chute is started up under the trimming of the waterproofing and fastened to the grating. It is necessary to install yoga under the hood, otherwise sealing suffers - you can drink water from the windows at the window.

Today, there are two main types of wages for different folds. The first one is victorious for work with flat covering material, the other one is lame. Companies that are engaged in the production of attic windows, apply a salary to the delivery set. For this reason, the principle of work with both types is identical.

The salary of the window is included at the delivery of the structure, and the installation rules are described in the instructions for the picker

Attach the next lower part of the salary of the attic window to the front. Install it in such a way that the waterproofing apron goes beyond the frame and covers the sheets. After that, go to the side components. The edges of these elements can be put on the frame itself.

The salary of the window is attached to the reshetuvannya ramie

Ushchіlnyuvach is laid along the outer part of the frame. Most of the wines, fastenings and all other components are included in the delivery set, but in a few cases you will have to buy them later. At any time, if it is necessary, then carefully check everything for accuracy and accuracy, tk. replacement or repair of attic vicons at the time you need a lot of trouble.

Installation of a sklopaket and internal improvements

At the next stage of installation of attic windows, it is necessary to turn the cladding back at the frame. It’s easy to try to do it, but if the technology is to lie in the foreman, then the process itself is full of descriptions from the helper.

The sklopaket is mounted at the last stage, the trim is selected for the interior

It is also not to blame for solving problems and internal improvement of windows at the Dahu - all lie in the form of special advantages. In addition, a lot of options for a set of attic windows are also given special solutions for facing. Naychastіshe in nabіr enter sealant, miter box and template. Similar templates are, however, well placed and are accepted for the necessary.

As an alternative option it is possible to victorious and standard gypsum board, and the axis of the mechanical mounting structures in such a way should be moved.

Features of insulation of the attic window

About the work with a heat insulator on the floor, it’s okay to say. Even more often, incorrectly insulated attic vicons turn into faceless problems due to its operation. A lot of shortcomings of alarm clocks are vvazhayut for better vikoristovuvaty for warming a great mounting pin. Robity is not good: expansion of the material can lead to distortions and problems with insulation. The correct technology for installation is recommended to use materials from the look of stone wool with a high term of service.

For thermal insulation of the attic window, it is best to use stone wool

In the capacity of an additional entry, it is recommended to install a singed fitting under the attic window. Sweep of warm air with equal success and viconn mows, heat up and protect against condensate. Metal elements for the installation of insulation do not varto - stench can make cold spots.

Everything you need to know about the installation of an attic window to soft covering or tiles. Irrespective of the complexity that they are given, the process itself is simple and does not help the mind, but the hour.