Sales of food from the virobnik. The entanglement of centrifuged fingers The centrifuged ones fell in goat ambushes

TOV TK "Budivnytstvo" produces and implements ZBV - production from concrete, which is formed in the living room. Current production pressures allow us to produce a wide range of products. Due to the wide range of frequent control, you will remove the safety and health protection substances, which comply with all relevant norms and standards.

Elementi budivel ta sporud

Elements of gatherings

Elements to improve the territory and roads

Engineering communications

Elements of wells

Collection elements

Trays and cover

Rolled metal

Nonmetallic materials

Our company produces and sells the following concrete blocks at the best prices:

• FO pillows for layering foundations;
• the hammers fell;
• FBS foundation blocks of various brands and sizes;
• rings of wells for water and gas pipelines, connection lines, sewerage;
• refrigerated slabs of all types;
• gatherings of Maidans and marches;
• airport and road slabs;
• drive away the beams;
• heating main trays.

In addition to the re-insurance of the waste-containing waste materials, we vibrate and sell other products from salzed concrete, and also propose to buy non-metallic materials - cement, sand, expanded clay. A new replenishment of materials from the performances of the catalosis on the pages of the site.

Advantages of ZBV under LLC TK "Budivnitstvo"

Yakist according to GOST

Vividno

Nadijnyi vyrobnik

The production of vikoryst includes bright milk, special additives and components. BV virus production is based on the established functional knowledge and new technologies. Our viruses are mild, durable, reliable and comply with all established benefits.

The enterprise employs highly qualified specialists. Competent managers will help you select a safety equipment for the maintenance of objects of various importance. Respectfully, the deputy manager allows you to effectively complete the most complex tasks.

Other advantages of purchasing ZPB from us:

Using the centrifugation method, empty round shells with a diameter of 0.4–0.8 m and shell shells with a diameter of up to 2 m, and a length of 3 to 12 m are prepared. The pouring process requires special grades of concrete.

Preparation of centrifuge pins

The production of centrifuged round fingers is carried out on a special device with a collapsible cylindrical shape that is wrapped. A reinforcement frame is laid at the lower half of the form, and the upper part of the form is attached. After the wrapper (speed 100-250 rpm), concrete is supplied at the end opening of the mold, which, under the action of subcentric forces, is reinforced on its side walls. After steaming and displaying, the form is disassembled. The fire is ready to come out empty in the middle, the thickness of the walls is 80 - 200 mm.

Empty pallets that are prepared for centrifugation baths have a number of advantages on par with monolithic ones:

• With the thickness of concrete, however, an empty scaffold takes on great importance;
• when empty, centrifuged steel requires less metal for the reinforced frame;
• An empty stick has greater value when transported and placed in a copying device.

Technology

Centrifuged pits with a diameter of up to 0.6 m are enclosed in the ground and covered at the bottom with a steel or reinforced concrete lining. For their strengthening, shock and vibration methods are used. With a larger diameter, less than 0.6 m, the fire, which is enclosed with a closed end, can be pressed under the pressure of the soil on the side walls.

Palais with a diameter of over 0.6 m are enclosed with open bottoms, in which case the soil often fills the inner empty pali. In the near fall, the soil from the internal empty pits is removed during the filling process, then when the empty part is settled, introduce concrete mixture. For hardening, the method of low-frequency vibration is used.

A wedged pin of a large diameter exerts significant pressure, so in these cases, especially tight vibrating pins are used, which are installed on the head of the bollard, and the lower end of the bollard is ensured by welding to the reinforcement frame with a steel ring knife, so that I feel stuck in the ground.

If it is necessary to remove the long-term drill, it is necessary to tighten the pins with additional straps, in which welded and flanged bolted connection methods are used.

They are prepared from high strength concrete, their average thickness is 2200-2500 kg/m3. The smells are detected under the supports of power transmission lines with a voltage of 35-750 kV. They can be removed from the middle, which has an aggressive effect on concrete. The length of the stands is 22 to 26 m-code.

• at temperatures up to 55°C.
• In regions I–VII there is wind pressure.
• In areas I-IV there is ice behind the width of the wall.
• According to SNiP, building racks against earthquakes and seismic ridges of the Maidan range from 1 to 9 points.

Racks of cylindrical shape and reinforced concrete centrifuged

The cylindrical rack is transferred to the generator for racks of portals of open initial devices 220-330 kV, flash leads, etc. Stands of cylindrical shape are widely used during the normalization of various power transmission lines, as well as on the electrical route as a support for the line connection.

To prevent even greater penetration of electrical wires, stand the supports of the space system (for example, if the distance between the supports is 200-300m). All warehouses of such centrifuge supports will be destroyed. SCP stands (cylindrical portal strut), traverses are connected to vikoristants, welding clamps are connected to embedded parts.

Marking of concrete stops

Let's take a look at the decoding of the supports from the butt of the support of the Stіyka SCP (Styyka cylindrical portal). Data are marked according to the sequence of letters and numbers.

• 26 – dozhina;
• 1 – the level indicated for the cross-cut of the counter;
• 1 – non-existent building;
• 1 – type of reinforcement.

Moreover, on one side of the surface there is a mass and the date of creation of the support.

Guarantee of vibrator's vigor

If the post fragments are non-knocked, then during drilling the maximum width of shrinkage cracks is allowed to be no more than 0.2 mm. At the same time, the dovetail is not to blame but is changed to ±60-80 mm, the girder is ±6 mm.

Subject to the technical documentation, supports can be supported at the level.<30 мм, а толщина бетона до арматуры не может быть <5 мм от проектной величины.

It should be made of high quality; shrinkage cracks with a thickness greater than 0.2 mm are not allowed to appear on the surface. The centrifuged samples were taken to the 3D germs, which are considered rare and specific. Due to the flow of the structure of the body, the technological reserve of value and durability of folding natural boxes increases. The support is based on external factors and does not succumb to deformation processes.

It is difficult for a contractor who needs to buy firewood to verify the strength of the concrete and the production technology. Virus production must undergo preparation according to standards that will ensure the completion of the technological process at all stages of production. It’s impossible to trust the source’s dubiousness. We produce palli and sell it with a guarantee of quality.
The buyer of centrifuge-type germs may not trust middlemen who can re-sell unknown germs. It is obvious that the yakness certificate does not give the mellowness of the product because it is of high yakness. In this case, the price may also be a criterion that determines the value of the germs.
Therefore, brutality to us is the most correct way out of the situation, if the deputy wants to trust the postal owner from the first place. We produce standard sizes and can be customized as required by special types of construction, including atypical projects. Concrete gates are accompanied by metal frame elements of a monolithic structure for fastening with grillages.
At the production centrifuge, they undergo verification and testing at the test bench. In addition to careful dosing of concrete mixes, visual control of the output product, the racks are subject to experimental testing, as a result, the output stiffness, durability and value may vary.
Sales of the plant from the plant guarantee the safe operation of the plant in the yak plant without the threat of collapse of the structure of the plant under the influence of weather and mechanical factors. Of great importance for the spinning fingers of the centrifuged variety is the creation of a special form for concrete.

Centrifuged

The end posts are either centrifuged or centrifuged for the construction of the foundation under the power transmission line supports - reinforced concrete boxes with a displaced area due to a sharpened circular cut. The stinks are driven into the ground by special technical means. Thanks to the technology for installing foundations under supports, which does not require digging holes, installation work is carried out at a high pace, which promotes the fluidity of laying power lines.
Centrifugation is recommended for recovery during seismic activity up to nine points. The structure of the virobe imparts integrity to the body during the preparation process by pouring the form with high-strength concrete. To increase the resistance and resistance of hair to aggressive factors of the external environment, special additives are added to the concrete, and the body itself is reinforced with rods and meshes made from grades of frost-resistant steel.