Install wheel locks on your bike.

good
Vidminno
It is easy to guess that there are no “standard” or “extraordinary” krills in nature.
All smells vary depending on a number of parameters.
1. By diameter and width of the tire
2. Behind the places for mounting a bicycle
3. Frames for bicycles without frame mounts

4. Different sizes according to the material of production
5. Select the krill according to the method of fastening

6. Exotic and native varieties of krill

Selection of krill according to the diameter and width of the tire
In front of us, the tires are selected according to the diameter of the wheel, which you can recognize by looking at the tire from the side.

And it smells all the same - from 12 to 29 inches. Having found out, you can safely go to the store and ask to see all the possible options for wheel size. However, wings do not have the same diameter.

Marvel at the width of the wing, so that it could completely cover your tire.
Mountain bikes are especially expensive, since the tires can be even wider, and fat bikes are even more expensive.

With such wings, the clothes below the waist will still be brusque, and if you were on a fast track with a girl, then you can grab hold of the bush and give her the gift of marriage.
Adje more by the belt and look at the enemy kindly.

However, on mountain bikes, krills are not a practical accessory and rarely provide complete protection.
There is no need to worry about small bicycles, folding ones, or cruisers..

There, the wing is a necessary element, without which it is impossible to find such bicycles, even if they are equipped with wings as standard from the factory.
It’s true, you won’t ever be dominated by the krill breeder’s protonation. And even the full-sized wings may be responsible for the material.
The benefits of full-size krills based on the materials used Stalevi
Perhaps the most impractical option. .


The only plus is that the smell is cheap.

Rashta – minus.
Toil the bike, which means tightening the bike. .

When shaking, it is even unreliable - the attachment in the appearance of the bundle tends to fall out of the wing and often fails successfully.

When driving, they make annoying noise, constantly clatter, and wring out frequent connections..


Aluminum

.
It’s easier for metals, but they become even rarer for the stated reasons, and the cost is much more expensive.
Plastic.

There is also a rare option. The stench is significantly lighter than metal, inexpensive, but not necessarily reliable.

Metal-plastic Between the burnt and the crown of the fork there is also a call for the purity of your appearance.

Saddle shield keep your heel point dry and clean.

Most exotic “krills” can be made with your own hands. Remember the program “Crazy Hands”, where 2 people collected from plastic dances

and packages for Lada Priora?

So, as a minimum, you can pick up the wings with the protection you need from plastic balls. If you don't have any soft fenders on your bike, you can supplement them with a self-made fender made of plastic. Also, for small shields, you can get a small folder from a stationery store.

You will no longer have to cut the necessary shape and install it on the bike using nylon ties. A wonderful video about wings made with your own hands. The popularity of bicycles among the population is affecting Vlasniki, so the transport sector should become familiar with the peculiarities of this

technical service

. There’s a lot of food to be had – and it’s necessary to install the wings on the bike, and the food won’t give anyone a unique type of food – everything is stored according to individual requirements.

• Make sure that fans of Georgian/Swedish bicycles do not install wings on theirs.
• transport service
• – do not complicate the design, which automatically reduces the speed and maneuverability of the bicycle.

And the axle for a bicycle in the minds of the local life will be even more pre-river - the stench will at least permeate the pond and the water breeze of the cyclist’s clothes, and that’s not a little.

See the krill on the bike

There are a number of types of bicycle parts on the market, but if you look at it, you will need to remove information about the leather from them.

So, at retail outlets, customers can try out three types of plastic for bicycles:

Professional cyclist racers often choose the shortest wings for their two-wheeled transport vehicle, wanting the protection from the rocks and water to be minimal.

Long-term hospital

This type of krill is considered classic and most innovative/practical. They are installed behind the help of bolts, and the frames are fastened to the fork at three points. At

the right choice

The width of the long stationary wings protects the cyclist from the bridge and the water will be on a high level.

We produce this type of bicycle parts from metal that is suitable for road and highway transport.

How to install a kril on a bicycle You can install the Swedish wings on a two-wheeled transport vehicle yourself.

It’s literally a matter of two hands – the wing is simply placed in place and pressed into place (pressure alone).

For stationary projects, you will need to prepare for a very simple process.

Restore respect:

Fahivtsi insist that stationary bikes need to be placed on a bicycle.

If you plan to install a rear trunk, then a fender is first installed.

In this article, I am neither advocating for nor against bicycle guards - but on the right, it is absolutely the government’s.

Whether it’s up to you to get wet (or not get wet) is especially your choice, so the choice is yours.

1. I’ll just respect that it’s not good to aggressively show off your point of view on forums or wild rides, no matter where you’re from. Let's go over the main arguments of the opponents of the bicycle krills. Zaiva vaga.

2. In one of my articles, I explained my point before, but in short - there is no need to deal with the fool. By the way, before the end, this means that in our hour everything garni options The shields are of entirely acceptable categories.

3. Metal as a material has long been popular in the past. Aerodynamics are getting worse

4. . In my opinion, this point may be considered less important in races with separate starts, since every second is important.

On extreme rides, when

normal speed

Little is known about the influence of krill on aerodynamics.

Tim, who really feels the negative effect, I can only encourage him to practice and eat more.

Oversized fenders, in addition to looking wild and unsportsmanlike, are undesirable for MTB due to clogged gaps between the protector and the shield itself.

Therefore, if you are using your bike for recognition, then I can recommend a gear kit that I use myself:
Front wing Rear wing
I recommend getting the version for nineners, if you have a 26″ Shield for the lower ramie tube

protects the breeze from the bottom of the front wheel. Before speaking, you can do without the front fender, since the axis will speed up like this exotic thing

.

There are spitting breezes that throw the front wheel forward, are spit by the sharp wind flow and directly attack the cyclist.

This piece of neoprene really works, I verified it myself. Of course, it protects the heart, the lower wing, if you don’t want to lose the outward appearance of a fetishistic tale - this is the thing for you. Krila for road bikes and hybrids

Here the nutrition of the outside world seems even more important, compared to the mountain tales.

There is even a more sophisticated option that may not be compatible with the highway. Crud RoadRacer Mk2 .

______________________________________

I haven’t really gotten around to it yet, but it was recommended to me by a friend who is a road racer.

The system is easy to understand and adaptive, so riding on a bicycle is almost unforgettable.

Behind the words of someone I know, goodness is stolen from the water.

As an option, you can also put classic

SKS Race Blade

The master shares his satisfaction with the purchase and installation of a bike on a mountain bike.

Wheels for bicycles come in different price categories, but my bike can travel no more than 500 km during the season and buying simple budget wheels for a fraction of the price is completely justified.

The Velo Krill was purchased from an online store and delivered quickly.

• The instructions for installing the bike with your own hands, adjusting their position and dealing with the difficulties of the unsuspected “surprise” are discussed below from the photo and video.
• For or against installation of krill
• If you are not an athlete and not a big fan of mount motorcycles, then the installation of krill obov'yazkova.
• Krila for a bicycle are designated by the type of bicycle and according to their recognition.

Positive aspects of installing krill:

• This will protect you from breezes and dust on you and on bicycle parts;
• Correctly choosing the wing will improve the appearance of the bicycle and improve its safety on the roads;

The term between prevention and adjustment of the mountain bike is growing;

The bike breaks less, and it seems less likely to crash.

• The following can be added to the shortcomings:
• Creatures also bark both when driving and when parking or transporting;

Creatures can be very difficult to survive when stored and transported.

True, some of these difficulties can be solved by installing smart wings.

I won’t talk about the popularity of bicycles.

My double-suspension bicycle is used for walks near the forest, trips to the lake, picking mushrooms and fishing. The places of this ruin have no forest stitches and dirt roads, the place is very congested.

It’s a pity that the fender breaks, my rear fender lasted at least 5 years and was broken in the parking lot. Having prayed for mercy, it screamed. Without sacrificing a reliable result, the service life of a repeatedly installed rear fender in the mounting area is no more than 1 month. The new wing wanted to make things more fun. The new wing wanted to make things more fun. We ordered through the Internet a selection of beautiful salad colors with a difference in price from the nearest bicycle store in the next three days.

Having cut off the settlement in two years, we proceeded to install the krill.

A package with parts contains all the necessary accessories and a folding tool – a small hex key.

The instruction label shows all the main stages of assembling and installing the fender.

The forward folding revealed a shortage of wings.

Chantly, I was not spared.

Uncle Liao's surprise was the discovery of a set of three washers with a diameter larger than the seat for them.

The steps are protected from weather “surprises” to lie down until the end of the wing and its movement over the wheel.

To ensure that the beam does not clog into the space under the wing, it will be as long as possible and fit as tightly as possible to the wheel.

Stationary wings may be short.

They are usually prepared from plastic.

The stench is much shorter for long periods of time.

Just like long fenders, the short ones fit tightly to the wheel and ensure reliable protection from the breeze.

It will be more problematic for the front short wing to enter behind the brood, lower than its brother.

For longevity, short wings are sacrificed for long ones.

Shvidkoznіmnі.

Є mainly with attributes of mountain bikes.

Among cyclists, there is still ongoing speculation about the viability of krill.