How to connect a water supply faucet Instructions for self-installation of a zm_shuvacha for a bath. Materials for the preparation of locking mechanisms

⁰

When choosing a size for the kitchen, it is necessary to follow not only the aesthetic microscopy, but also practicality. At the same time, not only the plan of efficiency of operation, but also the ease of installation, as well as the possibilities for repair. Therefore, before going to the store, check out the features of models of different designs and the nuances of their connection.

When choosing the optimal model, the following moments are protected:

shell dimensions and depth;
presence in the free space between the cup and the wall;
reconcile that misfortune open the tap.

The largest width of the nabula is the following types of faucets for the kitchen:

axlebox crane;
single;
electronic.

vidi

The traditional crane-axle boxes are simple for the design and overhead. The main working element is a crane box, which, if necessary, can be easily replaced and repaired. Obviously, if you do not blame the problem, how to change the zmishuvach on the kitchen floor. Crane axles can be of two types: ceramic and worm. First, the zamikannya that regulation of the flow of water is carried out by wrapping at least one of one ceramic plates with a shutter. On the other hand - by lifting and lowering the stock, which wraps around the groove.
One-size kitchen zmіshuvach zruchnіshiy in operation, oskolki may be a single governing body. The head element of the newcomer is a cartridge, which is similar in design to a crane box, which flows through two water streams. Cases of single-sided models can be both unbreakable and wrap around according to the axis of installation. Zustrichayutsya and sacks, in which the water is interrupted by the sack, which turns around, with openings.
Electronic options allow you to secure the supply of water at a constant temperature.. Deyakі models can turn on the water through the contactless sensor. However, structurally, they stink even with folding outbuildings, which will inevitably increase their versatility. Electricity can be supplied from electric lines or from batteries.
The height of the vilivu is chosen according to the improvement of the features of the bowl of the mitt. For shallow models, models with a low twist are more suitable, which change the spray pattern.
In the minds of the kitchen, installation is most often carried out directly on the bowl of the mitt, or on the stilt.

Preparation of materials and tools

Before that, how to change the crane, it is necessary to prepare a new set of tools and window materials.

The following tools are needed:

rozvidny or rіzhkovy key by 10-12 mm;
tubular key for tightening important accessible nuts;
grazing; twist;
ganchirka;
pelvis,
lighter.

Materials will be needed:

mounting kit, what to add to the annex (hairpin, shackle, nut and fasteners);
ugly fum-strіchka abo lion for special leaks (especially good for the English oshchilnyuvach Tangit);
silicone sealant;
the jack-o'-lantern.

Dovzhina podvedennya is chosen in such a rank, so that the hose does not kink under the host's hood, but without straining it.

Before that, how to replace the change in the kitchen, add new hoses and new hoses to supply (often come with a new faucet).

As a introduction, it is possible to vicorate bellows or reinforced hoses.

Bellows they are made of stainless steel, they are breathtaking with great pride and high quality.
Reinforced hoses The largest expansion through a small price and sufficient superiority.

By the way, it’s better to say which one is better for the kitchen, it’s possible for the quality of water.

Nadіyni virobi may have such signs:

braiding with stainless steel or aluminum;
hose made of ethylene propylene rubber (EPDM).
tips and fittings made of stainless steel or brass.

Dismantling the old crane and hoses

To replace the faucet with a new one, it is necessary to dismantle the valve on the back, which has served.

For whom the operation is low.

water on vіdvedennі to mittya.
Faucets are turning so that the water that was left in the pipes could freely flow into the sink.
Like a mitt of an overhead type, її vіdkrіplyuyut vіd tumbi.
Seeing the water pipe. At this stage, it is necessary to squirm with the pelvis, where the excess water swells.
The siphon is coming out.
The miyka is lifted up and installed on the pedestal in such a way as to secure free access to the installation site.
Gnuchki dvedennya are seen.
If it’s a watering-pot, then it looks like a won.
Rozgvinchuetsya kriplennya.

Let's use one hand to take the twist, and the other wigvintite the threaded fastener and clean up the old faucet.

Installing a kitchen grinder

Storage

Nasampered, next, choose the priest himself. tobto. nagvintiti viliv, aerator, insert handles, etc. The sequence of operations can be different for different models and for different generics. You can specify the details and features in the instructions for adding to the skin attachment. When choosing a zmishuvach to the kitchen, it is necessary to change at the accuracy of the document.
Picking up a crane, not varto reporting significant zusil. As a rule, all knots are freely twisted in the form of a hand. If it is necessary to choose the keys, then it is necessary to secure them with the utmost care. In a different situation, I will add a risk of poshkodzhennya chrome-plated pokrittya.

Mater'yanі overlays in case of becoming the most important decision, how to install a zmishuvach in the kitchen and in case of which yoga should not be zipped.

Dovzhina fittings can be like the same both water supply, so different. Another option is to make a lot of pickings to ease the installation work. The order of further distances is dependent on where the crane is fixed: directly on the miyka or on the stilt.

Installed on a mitt

There are two ways to close a two-valve faucet on a miytsi:

on a hairpin
on the nut

Z fastened on a hairpin

At the first drop into the valve body, before installing the screw, screw the threaded stud. It may be cut along its entire length, it is necessary to change the groove before screwing, so that the slotted notch is left on the outer part, and not in the crane body. It is necessary for the sake of repair and dismantling.

Some models for overhead sinks can have two such studs. Dali on the base of the crane is put on a ring gasket.

It is necessary to protezhite, so that she lay down on the designated place for her.

In some cases, the gasket may have a foldable shape and, when installed, it is necessary to orientate in the appropriate order.

At the next stage, the hoses are wound up in the opening of the miyts and the faucet-zmіshuvach for the kitchen is installed behind the counter. During the final operation, it will be handy to turn the miyka in such a way as to ensure the possibility of using both hands to the beast of the bowl, so from below.
Let's put on a humic seal, which seals the installation space from the bottom side of the bowl. The shape of this narrower changes with the shape of the pressure plate.
Now you can press the plate and screw the nut onto the threaded stud. If the crane will be fastened, proceed to fixing the mitt on the cabinet.

With fastenings on the nut

Installation on the nut is carried out by a different order. The cranes of such a design are based on a wide cylindrical part with grooves, a fastening nut is screwed onto the yak. It’s easier to get a connection to such a foundation, lower at the bottom with fastenings on a hairpin. To that hoses p_dvodok p_klyuchatimutsya after installation of the crane on a miyka. This moment we won’t lie at the mercy of food, which one you choose zmishuvach.

Installation consists of a number of operations:

Installed gaskets at the groove under the foundation I will add;
The threaded part is inserted into the mounting opening of the mitt. Vikonoyuch tse, it is necessary to control the position of the elastic gasket;
From the lower part of the mitt, one more gum gasket is pulled from the set of stitching. From the top of the gasket, it looks like a shape. The upper one looks like a thin gum ring of a round cut, the lower one is flat and wide. At the same time, the attachment of the zmishuvach to the kitchen can be different, the forms of the gaskets can be adjusted;
Fastening nut is screwed on. When tsmu sled control the position of the base of the zmishuvach. The facial part of the veins is guilty of buti beasts to the front edge of the mitt. Since the design of the crane is such that visually it is possible to visually identify its position, the centering is reversed by turning the swivel. In offending the side of wines, he is guilty of going to the same place. Like a faucet rotting at the coddle of the miyka, then orientate it along the diagonal of the shell;

Screwed water supply hoses. A hose with a short fitting is installed in front of us, then - with a long one (selecting a zmіshuvacha for the kitchen - in the right order). Additional sealing of water pipes is not needed, shards on the fittings are already present with gum rings. About їhnє іsnuvannya not varto forget when connecting the supply. Zusilla for an hour of delay is not due to the overworld, so as not to harm the humic ravines.

The final stage is the installation of the mitt on the cabinet.

Installation from fasteners to stiltnitsa

This version of the installation is rich in why it is similar to mounting on a nut. The difference lies in the fact that in this day of the year you don’t have wide sides and a place for installing a crane. That roztashovuvat vrіzny zmіshuvach happen on the stіlnitsy, in the uninterrupted proximity of the mitt.
The place of fixing should be chosen in such a rank, so that you can easily reach the crane control bodies. In case of need, it is necessary to reconcile, so that at the worker’s position, he hovered over the sink.
Having risen from the point of attachment, proceed to the opening of the opening in the style. For this vicorist, drill that pen on wood. Pen diameter - 38 mm. Other little steps will be offensive:

in the threaded cylinder, the hoses are stretched;
pіdvedennya creak to the foundation of zmіshuvacha;
cylindrical fastening is screwed in there;
the upper gum gasket is pulled on;
the whole structure is inserted into the opening at the style. The nuts of the water pipes slipped into the opening at once, they were not seen, to that one by one they were stretched one by one;
from the bottom, a gum gasket, a washer and a nut are put on the fastening.

Then we change the position of the zmishuvach and the whole structure is tightened with a key.
Mayzhe by a similar rank is mounted and vbudovaniya zmishuvach.

Installing coarse filters

Piped water often brings from itself an impersonal smіttya:

pisok,
shmatki irzhi thinly.

In order to prevent the aerator and cartridge from getting dirty, it is necessary to stop the coarse filter.

Install the filter the most beautifully on the inlet of the riser, de yogo is easy to maintain. When it is necessary to control the position of the oblique pipe with a screen, which is filtered. Vіn zavzhdi is guilty of buti nachivaniya to the bottom, scho easier cleansing nets.

In addition, the arrow on the filter housing is guilty of running straight out of the water.

Hose connections

Choose a changer for the kitchen to lie down in a set of yoke hoses. From one point of the stink, I can make a fitting for connecting to a zmishuvach, from another I will put a union nut for connecting to a water supply system. On the fitting one or two rings of an ushchilnyuvach and a gum are put on. Їх qіlkom vystachaє to ensure the tightness of the hour of connection to a new zmіshuvacha.

Having completed the installation of the zmіshuvacha, it is necessary to reconsider in yoga practicality and tightness of all spoluk. For this, install a faucet on the riser and zmіshuvach in the kitchen. As soon as you leave again, the zmishuvach will curl up and with a stretch of the year, you will see a leak.

Most of the leakage is caused by improper folding of the crane and poor sealing at the connection points of the water supply.

In the first moment it is necessary to reassemble the faucet and select it again, making sure that the gaskets and the cartridge are re-stuffed correctly. In the instructions, you can find information on how to solve the zmishuvach.
In another mood- fasten with a fum-string or with a lion for a wide fitting or a union nut.

For more problems, you can bring a hanging zmishuvach for the kitchen, in which you can put a hose to the watering can. It is better to replace such a detail again.

Chi it is necessary to install the cult cranes in front of the zmishuvach

The rocker crane has only two working positions:

vodcrito,
closed.

The installation of such a faucet allows you to open the faucet to the water supply for repair or replacement. However, in practice, do not make a difference.

How to recommend plumbing specialists, for the cob it is necessary to check the scheme of water distribution in the apartment. As soon as a bucket crane is installed in the riser, then there is no need for duplication. Behind the bazhanya you can put a valve or a reducer, which will help to surround the vice drive in the crane.

Skilki koshtuє remember zmishuvach in the kitchen

The main var_st of replacement is folded from stained glass to the faucet itself, to stained glass materials and to robots from the installation. For the end of 2018:

The minimum price of a kitchen storage unit is 400 rubles.. Maximum - per kіlkoh thousand.
Which zmishuvach is more beautiful - virishuvati lords, but expensive models will always be superior. Coarse filter koshtuє vіd 120 rub.
You won't get a chance to visit the water in most of the vipadki, the oskіlki will sound out є at the kit. Well, if there is nothing there, or if you don’t get it, then you will have to pay 150 rubles for the hoses.
Wiklik plumbing will cost 400 rubles.. With self-installed robots, they will be cost-free.

So that the problem of “how to choose a replacement for the kitchen” did not turbulent too often, it was enough to replace the gaskets that were worn out, cartridges and aerators. In addition, it is periodically necessary to clean the coarse filter and the stitches behind the grid mill in the middle.

The kitchen is one of the places of residence of a house in an apartment, as it is operated by a forced regime. The kitchen zmіshuvach knows the studennyh navantagen, to that it is possible to pick up the yakіsny virіb.

After that, how to select it, it is necessary to sort it out, how to install a zmishuvach in the kitchen, having done all the engineering work before installation. And about those, how to do it right, read our material.

For the cob, it is necessary to designate it by the installation method: the zmishuvach can be mounted on the stylnitsa, the body of the mitt or the wall. In advance, it is necessary to outline the routes for roztashuvannya pipes hot and cold water supply.

At any time of the day, it may be available at a time for further repairs and maintenance. If it is planned to install a filter, a place for this installation will need to be transferred back.

Zmіshuvach is always operated in tandem with miykoyu, so when choosing a virobu it is necessary to go out of її rozmirіv that glibini, as well as:

vіdstanі between the wall and the lapel under the zmіshuvach;
diameter of the opening under the opening of the zmishuvach;
points of rotashuvannya zlivu.

With this zmіshuvach, the mother is guilty of a sufficient life, so that the end of the vil after the installation fell on the center of the sink or mittya.

Dovzhina vilivu is responsible for adding half the width of the bowl of the miyka. The most ideal vapadok - if the stream of water is consumed directly into the zliv

The height of the vili can be set, so that a tap can be put on a high pot. Ale, don’t fall into extremes and swell over that high zmishuvach. Breezes are created in the same way, as if scattered between the mitt.

One more important parameter of the geometry of the zmіshuvach is the reason for the turn. If the miyka is close to the wall, it is enough to install a zmishuvach with a sharp turn of up to 90 degrees. If you have a victorious miyka with two bowls, it is necessary to turn respect on the model with a sharp turn of 180-360 degrees.

Variation in styles of plumbing fixtures

Having finished with the technical part, it is necessary to stand out from the old look. Today, a choice of styles of zmishuvachiv majestic flooring, so that you can create the most famous gentleman, you can choose your own model for gusto.

Classic, hi-tech, loft, minimalism, ruby and obtіchnі form, chrome, midi chi black - you can choose an option for a be-like kitchen.

With this, unfortunately, there is a rule: what is more expensive, then more beautiful - especially relevant for plumbing and zmіshuvachіv zokrema. It has its own boundary, but the plumbing of the European production is an order of magnitude more expensive, lower than the standard of domestic preparation.

Determining the optimal design

At the choice, it is necessary to protect the features of the design of the zmishuvachs. The most practical models are the same, in which the flow rate and temperature can be adjusted for an additional one handle. Models with two valves are less practical, but better suited for a classic kitchen interior.

One-size-fits-all zmishuvach is the most practical option in the kitchen. With one hand, you can adjust the strength of the jet, and the temperature of the water.

Virobniki let out and contactless virobi, yakі mayut the ruhu sensor. If you raise your hands, the sensor will start to supply water.

For the kitchen, it is also not the most practical option, because you often have to change the temperature and draw water in the container.

Prices on zmishuvachi lie in the type of vicorous alloy and brand of virobnik. The found models shy away from silumin, make a garnier old look, but they wear out quickly and become inapplicable. Silumin and other cheap alloys dosit shvidko cry and crack.

Image Gallery

Dismantling the old fixture

If you are working on repairs, then for the cob it is necessary to dismantle the old zmishuvach. Otzzhe, vykonavshi all previous procedures, it is necessary to know the place of installation of the zmishuvach with water pipes. Farther it is necessary to know the place, in such zmіshuvach to be strong until the mitt.

For the help of the rose key, the rose bells blew that trumpet. It is important not to forget to present an hourly capacity, so that excess water can be found in the water supply system.

Like a consignment note, її it is necessary to pull it carefully. Before it, as if it were necessary, it is necessary to remove the lower part of the siphon. You can take only a little of the next miyka.

Mitya should be turned over in such a manner that it would be possible to manually twist the fastening of the zmishuvach. In these places, the irzha could be stingy, and the months of the day could boil one to one, so they should be processed with a warehouse of WD-40.

Having checked 10-15 quills, you can try twisting the lock nuts for the help of a wrench. On the back, you need a little bit to loosen the nuts, as you can find on the threaded pin.

Now, vikoristovuyuchi twist, it is necessary to twist the threaded pin. Under the hour of the operation, it is necessary to take the zmishuvach with your hand, so that you don’t fall into the veins.

To loosen the nuts, twist the keys, the threaded pins are easily twisted with a twist, then with your hands. At the same time, analyze the frame of the fixing elements and flexible hoses

It is necessary to clean the mounting opening itself from the mud, which is stingy. The old zmishuvach can be disposed of and proceed before.

Installing a new attachment on the miyka

Before that, like a viconate installation in the kitchen, you need to come to the new water supply. It is necessary to wind a clochch on all z'ednannya - with this help, you can seal the system as much as possible.

The tow is wound on the cut of flexible hoses before connecting them to the zmishuvach. On the shreds, you can add a drop of linseed oil, so that when twisted, the wool does not beat to the base of the cut.

The set of zmіshuvachem ide has a decorative gasket. Vіn vygotovlyаєєєєєєєєєєєє з metal and may є humovy prosharok. It is necessary to prostezhit, so that the gum insert of the bula is inserted exactly at the opening of the ring groove. Push the ring through the water supply to the base of the zmishuvach.

Now you can install the zmishuvach on the mitt by stretching the hoses through the mounting opening. Give in to the help of someone who calls, so that, having attached the zmishuvach, while you screw the yogo to the miyka. It is necessary to insert a spacer through the opening.

For cutting, having opened in a metal miytsі e = zastosovuyutsya special attachments, which will make it easier and speed up the process. The diameter of the cut is picked up, I will build it out, which will be installed.

Next, screw the threaded pins through the spacer (press the plate) to the base of the zmishuvach, screw nuts on the pin. Now your partner is responsible for fixing the zmishuvach at the working position, so that you could tighten the nuts for the help of the socket wrench (for the most wrenches, the wrench is 11).

Now zmіshuvach having accepted those camps, for some kind of victorist to be with the future. Before the final slugs, it is necessary to re-tighten the nuts, so that all the gaskets, which can be strengthened, did not break and stay in their places.

The miyka can be installed on the floor, and then we can add water pipes to the water fittings of the water supply system. It is necessary to clean the pipes of the pipes for the help of an emery paper and apply a winding ball. You can also use a linen thread or a rolled waterproof sealant at a visible stitch.

If you have chosen a stitch, it is necessary to wrap it with an overlap. As if you were virish to go to the victorious thread, it is necessary to smear the cut with a paste-like sealant and only then wind the thread.

Pіdvodnі hoses z'єdnuєmo z pipe, at tsimu kozhne z'єdnannya zatiskáєmo behind the help of the key. It is not necessary to push yourself to the supra-mundane force during the tack, so as not to break the cut

The kitchen zmіshuvach in the process of exploitation knows a colossal cost-effectiveness. In the wake of this wine, it’s better to go out of harmony, lower more of the other elements of the home cooking block. Yakshcho your crane having become unbearable, the time has come for yoga to change. Tse means that you will have a difficult choice of a good and at the same time acceptable “candidate” for the price. If you don’t have mercy, you will be able to independently develop in the diversity of proponated models, reveal their pluses and minuses. And as you have seen, that you are working with the robot with your own hands, you are responsible for the preparation of the necessary tools and materials, the folding and installation of the zmishuvach in the kitchen. Recommendations, selected from these articles, will help you at all stages of the work.

See zmishuvachiv for the kitchen

All kitchen appliances can be divided into three great groups - single and double or double-ventilated and sensory.

Equally important is richer in management. Vіdkriti, close and regulate the temperature of the water with the hand of a finger, a tyle or on the side of the palm. Zavdyaki tsomu can be cherubated by the building, not spolіskuyu zabrudneniy, not zvіlnyayuchi occupied hands. Tse give priority - zmishuvach is less confusing, and it’s much easier to clean it up. Use the same sling with a flexible hose, which, if necessary, hangs from the shackle.

Two-ventilation - in the house of the radian hours of the annex for mixing hot and cold water, equipped with two valves. In order for the water jet to reach the optimum temperature, it is necessary to wrap the taps. These systems are not easy to install and are more likely to be known to retro lovers. For the help of the valves, it is impossible to swipe the zmishuvach, without hand it is not economical. To that, whose attachment is really justified only in a vague way, as if calling out to support the style of that other interior. Vyrobniki realize the release of medium sizes, double, ceramic, stone, bronze. It is possible to get away from unhandedness, as the design is supplemented with a special important, for the help of which it is possible to bring in that water. Get rid of the settings of the valves so that there is a necessary temperature.

Sensory - presented to the majestic variety of shapes and colors. Their designs have daily handles and valves. The systems react to the appearance of hands with a twist and automatically spratsovuyut. To control the water temperature and the attachments are programmed. The main problem of such zmishuvachivs is the necessity of contact with the hands of koristuvachivs. For this very reason, you can often win the vicor at the huge places from the promoted passage. The only minus is the addition of reviving the batteries, and as soon as the stench is discharged, the photocells stop working. It is necessary to carry out regular replacement of living elements.

How to choose correctly zmishuvach

We are responsible for this, as if there will be a faucet in the kitchen. One river, as a replacement for a new kitchen, was specially selected for a sink and a replacement. Insha rich, if you need to replace the old faucet. Then it is necessary to secure the following parameters:

shell depth;
the place of distribution of evil;
a place for cutting a zmishuvach;
diameter of the main opening;
vіdstan vіd mіstsya vrіzannya to the wall.

Selecting plumbing fixtures, varto put respect on the material prepared. Inexpensive options from soft alloys, for example, silumin, sings look good for the kitchen, cook infrequently and wash dishes in the dishwasher, vіdmіnno pіdіdut. The minus of such taps is in their lack of understanding. They often get out of tune with the rhythm - crackle and crumble. The repair of such cranes requires less gaskets.

Bigger materials are used for taps made of brass, stainless steel and similar high alloys. Such zmishuvachs don't care much. Zipsuvatisya in them can only be strengthened gaskets or rings. The surface is often imitation of chrome - matte and glossy, nickel, aluminum.

For a pair of up to mitt with natural or piece stone, you can choose a variety of coatings for the material of the shell - the new one will have the same texture and color. The photo shows various options for such combinations.

In order for the faucet to ideally fit to the old mitt, it is necessary to adjust the diameter of the opening opening and fastening. The block is guilty of entering the opening. Dali, choose the height and length of the nose. Viliv is guilty according to the dozhina vіdpovidati half of the depth of the mitt. Optimally, as the opening of the tap allows you to remove the strum, which falls exactly into the center of the bowl. Height is guilty of allowing you to put a high pot in the miyka, and then there is a trace of peace - a high foot provoking the adoption of a great number of breezes. Ideally, like a tall zmishuvach of additions to a viscous liykoy soul. Yogo can be lowered lower, put into a saucepan or a teapot, which should stand on the side on a table.

Give respect to the turn of the crane. Like a miyka, it is inserted well up to the wall; For a sink with a faucet, installed in the middle, a necessary attachment, which can easily be rotated 180 or even 360 degrees.

Do-it-yourself installation of a zmishuvach in the kitchen

The first thing you need to do before installing it without interruption is to check the totality of the purchased kit and buy gaskets to reject. As the model is budgetary, you are unlikely to find any other accessories in the box. It would be better for that once to replace them with good characters.

Necessary materials and tools

For the installation of a zmіshuvacha, it is necessary to prepare and prepare everything that may be needed for an hour of work.

You can't do without:

rіzhkovy key for 10;
pipe wrench - for work with important nuts for the hour of sink installation;
two gum washers;
drink metal;
bet nuts;
fum-strіchki for strengthening the mission of z'ednan;

The most common set of materials for sealing is sold in sets with a zmishuvache, but even though the “relative” gaskets did not seem to be trustworthy when viewed visually, it is recommended to add these elements to the okremo.

The cream of the rehabilitated vishche, you need:

grazing;
twist;
ganchirka;
lighter;
Gnuchki plumbing hoses - connections for water. Such spare parts sound in the kit, but most of the time they are too short.

Dovzhina pіvodok is guilty of being not over something great and not over something small. It will be optimal if you don’t have a crease in your life. It is not recommended to build up the factory supply - next replace yoga on a new one.

If you change the hose, do not deprive the old hoses. With the help of the gods, everything will be changed.

Dismantling the old crane

The first time to open a robot to install a tap, then turn off the water, lay a ganchirka on the day of the mitt. Vaughn to clean the surface of the sink from the mechanical inflow of metal parts, which fell in a slippery way, and also not to let the rubbish spare parts penetrate into the pour.

When replacing a replacement, it is necessary to dismantle the old faucet. For whom it is necessary to come forward:

pull out hoses from the hot and cold water inlets for the help of the wrench. The hoses may run out of water, so give a basin for її selection;
we wipe dry the cutting of pipes;
twist the nut and the metal washer, which fixed the zmishuvach on the miyts;
Vityagaemo zmіshuvach from the evil opening at once from the waters.

Folding zmіshuvacha and vodok

The folding of the zmіshuvacha begins with the arrival of yoga to flexible hoses or hard visnovkіv. With a 2-valve system installed, the fold needs to be folded. It is necessary to insert the spout - twisting it into the body, exactly up to the circumferential ring. Z'ednuєmo їх at one point, for which I twist it by hand, not too tight. Robimo k_lka wrappers fumki around the end of the water. The tip of the line can not be wrapped, the shards in the hose are a gum gasket. Then we zanuryuєmo throw the hose into a special opening on the zmіshuvachі and twist it by hand, then we reach it with a wrench by 10. Other installations are mounted in the same way. After that, a hairpin is brought - one or two, roztashovuchi їх uphill cuts. The final touch is stretching the hoses of the crucible of the collar, bringing it to the foundation of the crane body and fixing it.

Methods and techniques for installing a zmishuvach

You can mount a kitchen zmishuvach directly on the miyka, on the stilnitsa or on the wall. Choose a specific way of being educated by the technical features of the mitt, the ability and the strengths of the master of the kitchen.

Installed on a mitt

Installation of a zmіshuvacha zdіysnyuєtsya for kіlka krokіv:

Start by installing a zmishuvach, connect to a new supply. All stitches need to be protected from possible fabrics for additional fum-stitches wound on the thread. Zavdyaki tsomu stench become hermetic and do not let the water through the name.
I will install a gum caliper gasket on the base, for which it will leak through hoses connected. It is necessary to prostezhiti, so that the insert squandered exactly into the groove.
We install the crane on the miyka, having put it through the opening of the hose pipe. In short, if you want to try the zmishuvach, do not screw the yoga to the sink.
I sell it through the supply line, press the plate, screw the pins in it into the grooves and bait the nuts on them.
Fixing zmishuvach at the required position and tightening the nuts for the help of the socket wrench. Better than double the work.
It is necessary to reconsider the position of the amplifying walls - it is necessary to reconsider, so that the stench did not escape during the installation process.
We install a bowl on the floor and connect hoses to the outlets of cold and hot water. Obov'yazkovo we clean the pipes for additional skins and wind the ball of the fumka, as it is necessary to wind it with an overlap or another narrower.

As a strengthener, you can vicorate a thread. In this case, apply a paste-like sealant to the cut.

Mount the siphon and test the system. It is best to change the tightness of the seal under the maximum pressure of the water. At the time of the development of the coil, it is necessary to re-tighten the threaded joints and conduct a re-test.

Sometimes there are no openings in the miykas for the installation of a zmishuvach, and then they go to the installation on the stilettos.

Any way to add to the tools, pointing more, will require the following:

electric drills;
a set of specific tasks for drilling;
electric jigsaw.

The peculiarity of this method of installation is that the dismantling of the mitten is not necessary - a sudden opening of a path of simple manipulations will appear in the style itself. In the next stage of installation, they are practically not dried in the forward way.

At the stylist, it is necessary to pierce the opening of the vіdpovіdny rosemіr at the singing mіstsі. When choosing a place, you may be protected by such practical moments:

when vikoristannі zmіshuvacha water is liable to fall on the working surface of the headset;
it is necessary to secure handily with respect;
viliv is guilty of roztashovuvatisya in such a rank, so that the water, as it falls, dragged into the center of the mitt.

To cut through the opening for fastening, wrap the base of the zmishuvach with olive oil. Open the door behind the edges of the marked perimeter, or along the stake. Insert a jigsaw and hit the drilled points. Removed from the opening, it is necessary to clean it in tirsi and polish it with sandpaper. Golovnya, don’t touch the opening with the opening, otherwise you can’t close the ring.

Further installation is carried out similarly to the installation of a zmіshuvacha on a mitt.

Installation of wall cushions

Zmishuvach, installation at the wall is a non-standard solution that allows you to significantly protect the working space. Another plus of this solution is that water is not used on the basis of the zmishuvach, which is why the gaskets and the threaded seals will last longer.

For this design, it is necessary at the stage of installation of a water-pipe distribution of hot and cold water near the wall. A zmishuvach will be attached to them. This type of wild boar will not need water.

Sometimes pipes or hoses are passed over the finish line, but it is extremely unaesthetic. Fat and mud accumulate on water, which must be cleaned. At the same time, the vologer is dragged to the stiltnitsa and that ruined її. To that it is more correct to attach the trumpets in the middle of the wall under the lining.

Connecting to pipes and re-wiring

After the installation of that fixation of the mitt, you can proceed to the connection of the flexible pipes to the water supply system. We clean the front and insulate the threaded pipes. You can apply a sealing paste on the thread and wind a thread, or use a special stitch sealant. The string must be wound with an overlap to ensure fixation on the hose. Without a doubt, another way is richly successful. After that z'єdnuєmo z'dnuєmo zadvedennya with a pipe that zatyskaєmo їх for the help of a rose key. Follow the powerful zusillyam - it can be average.

The final stage is the revision of the day. It is necessary to turn on the water to the full and stretch a few stitches for the tightness of the system. Like a drop of water penetrated the crest of the crack, it is necessary to strengthen the troch and let the water run again.

How to connect filters

Drinking water and drinking pure water is one of the ways to preserve the health of you and your loved ones. In our hour, it is not easy to get water for drinking in the minds of an apartment. Get in touch with them and help them with special systems that filter.

As soon as you have added a kit for cleaning the water, they have given respect to the fact that a sprat of tubules, a mini-faucet and a key can enter the new one. Mayte on the vase - no strengthening stitches that you don’t need to seal the pastes and threads.

Pokrokov's instruction for the arrival of the filtering system

We cut off the cold water for an additional tap, placed under the mitts. Vіn roztashovuєtsya on the pipe and before the new arrival of cold water for supply to the zmіshuvach. Do not confuse with a hot tap - open cold water and turn it over, you will get out.
We twist the hose and replace the new mount the tee, which is in the kit, and already attach the water supply to the new one. Vіdkrivaєmo cold water and reverify the tightness of the sticks.
It depends on the place where the filter is installed. It’s better to spread yoga on the side of the shafka. We are glad to spread yoga in such a rank, as a filter, so as to rob a rough cleaning, but at an easy access - you will often take yoga for others. At the bottom it is guilty to leave at least 10 cm, so that it is possible to carry out the change without interruption. The entrance to the door is about 10 cm, if it is not possible to damage the hoses. The kit has a template, which will facilitate the fixation procedure. Screws are screwed in at the designated points.
You can see the plugs and connect the tubes to the filter, right up to the arrows, which indicate the correct straight line, like water is to blame for him. A tube is inserted into the back, which supplies untreated water from the system, and at the same time with one of the exits of the previously installed tee. Then we insert the tube, which is to be opened, at the filter with the side without a metal tip until it stops.
A faucet for drinking water is connected with a set or a special faucet with two twists - one for drinking water, the other for drinking water. Such an extension allows you to hide the details of the additional openings at the miitsa or the stylists, but it will cost more for the standard option. One more shortfall - when you get out of tune, you won’t be left with your own dzherel water.

The okremy faucet needs to be closed on the miyts or working surface, and only after that, attach the tube to the filter. To install a zm_shuvacha two in one, it is necessary to z'yasuvati - chi є in the design of an adapter, into which you can insert a tube of drinking water. As such, it is possible to see a metal tip from the tube and put a nut on it. After that, we insert the fitting and tighten the nut on the thread.

Zmishuvach does not always need a replacement. Sometimes it is sufficient to replace one element, and I will renew the tap more often to my conscience. Let's figure it out - if a breakdown of a kitchen faucet can be blamed for an hour of operation, it's like a sink.

The most frequently reported faults are of this type:

hid tekti on the stick vilivu with the body. Through the post-yne wrapping of the spout, the humov's ring is worn out and the faucet begins to leak. To replace the gasket, it is necessary to remove it, remove the old gasket, install a new one, wrap a stitch on the right thread to seal it, and add the part to the extra space;
tekti z-pіd important keruvannya. The reason is a broken cartridge. You can determine the wear of the cartridge by the fact that it became important to turn badly, the temperature of the water began to change fleetingly, it was impossible to cut off the water completely. It is necessary to replace the cartridge for which it is necessary to remove the plug from the body of the replacement, turn the screw and remove the important decorative cover. We take a wrench, twist the nut, try to trim the cartridge, and that’s it. Place a new cartridge in the middle of the body and select a replacement;
the leakage of a two-valve zmіshuvacha - the gum washer was worn on the crane axle box, or the valve head itself was blown. To fix a malfunction, we remove the plug from the valve, which is out of the fret, turn the screw, which fixes the valve, turn the head, change it to a new one. If the crane-box is correct, then the gasket is changed.

The one who independently installs a kitchen zmishuvach has nothing impossible. It is not necessary to stock up on the necessary knowledge and a set of tools.

You can learn more about the process of installing a zmishuvach in more detail by watching the video:

Let's take a look at the details of the installation of a new zmishuvach in the kitchen. Installation in a stile and connection to a water supply system. How to secure the trial operation without leakage.

1. Robit before the cob

In the first place, it is necessary to cut off the water, in order to escape a possible flood;
Open a faucet to remove water that is left out;
Get a passport for a new kitchen appliance made at moscowmebel.com or another factory.

2. Preparation

For replacement, we need the following materials and tools:

Rose wrench (alternative - wrench);
Two types of twists - flat and cross-shaped;
Sandpaper;
Likhtar;
Єmnіst for zlivu vody when replacing the siphon;
New zmishuvach.

As a model of a kitchen mitt, it is znіmna, bagzhano її znyati. In this manner, it will be easier to dismantle the old version and install a new one.

Chrome-plated siphon for the kitchen mitt with a twisted key.

If the old one is upgraded to an economy class, it’s better to replace the soft hoses, so that the vibrators and the water hoses will be replaced.

3. Dismantling

Before dismantling the cob, turn off the water at the s / w to prevent flooding.

Steps:

It is known that the vuzol is connected with pipes of the water supply system.
Fixing the place of fastening to the shirt with mitts;
Yakshcho mittya consignment note - dismantled;
With the help of a key we lift the soft pipes, and the water is poured out at the prepared container.

We can see the part of the siphon (lower).
It is dismantled and rotated in such a way as to organize the most convenient access to the date of entry.
We loosen the nut and other elements of fastening behind the help of a rose key, then dismantle it with a twist of the threaded pins. Shchob virib without falling, control yoga.
We pick up a special clamp, flexible hoses and zmishuvach. Hoses are pulled through the mounting hole.

4. Mounting

In front of the next step, turn over the opening for installation. Yakshto in the new stingy nonsense, it is necessary to see it.

Parts required for correct installation.

Mount the hoses until the spatula is installed (leading to the water supply).

Steps:

1. It is fixed on the support with a special gasket (kiltsevu) at the transfer ditches. This order allows you to create a hermetic system.

2. Extend the hoses and then turn over the miyka at the outer position, priming the zmishuvach. Reverse the position of the gasket - you can lose it in your place.

3. It is necessary to reinforce the pressure plate (the stench is due to the mother of the same shape).

4. Screw in special pins (threaded).

Nadiyane fastening for the rahunok of threaded pins.

5. Using a wrench, tighten the mounting nuts.

If the nuts are tightened weakly, it will constantly rotate.

5. Launch

Reverse chotiri z'ednannya;
Having perekonavshis, scho all harazd, close the faucet and let the water in;
Turn over the supply of cold and hot water, so that the problem of leakage is avoided.

Photo: 3.bp.blogspot.com, dushik.com.ua, gidroguru.com, gor-servis.ru, i.minplastan-sale.ru, i.ytimg.com, lentaregion.ru, rmnt.ru, repair- bud.rf, o-vannoy.ru, small-house.ru, veles.msk.ru

Did you independently remember zmishuvach in the kitchen, but you don’t know how to do it right? You went for the address - today we will report on this topic, rozpovimo about the impersonal nuances and cunning, like a warto remember, and we will also talk about the zmishuvachiv themselves, and you can see that richly more about what is wrong. If you respectfully read the proponing material, then nutrition, how to install a zmishuvach in the kitchen stop bothering you.

Zmіshuvach іz high curved goose allow іz zruchnіstyu pіd nіgo dimensional utensils

Today, the market is represented by a large number. Zayshovshi in any store, some kind of trade in them, you will find impersonal options for some kind of taste and color - you can change the form, expand, and bring the functionality. About some functionality to go, supply you, the attachment only changes cold and hot water! If so, then you don’t know how far the human thought has roamed in the creation of the handfulness of the victorious zmishuvachs.

We’ll talk about the various plumbing fixtures for a little while, but now let’s name the main criteria for which stinks are selected for a specific kitchen.

Cassette zmіshuvach is controlled by a vazhel - it’s also easy to squirm with it from brute hands

First, on which respect is given - tse clay, the width is that shell shell (as it is round, then marvel, zvіsno, at a radius). Zmishuvach is guilty of dragging with a jet, which seems to be approximately in the center. At the same time, a small shell is taken and a low zmishuvach. It is illogical, you will say, but not. On the right, in the fact that, from the height of the fall, the stream constantly spreads to the sides of the breeze, as if the walls of the shell swell, and if the stench is not high, then you are guaranteed to constantly splash the space.
Another point is to stand on the edge of the mitt to the wall. It’s less than that, it will be more folding to install the overall models of the zmishuvachs. At the same time, the roztashuvannya of the landing opening is added. Another moment - how to bring pipes to the faucet. There are only two options here - either the water is supplied through the hoses from the bottom, or the trumpets come out right from the wall. Obviously, for installation you need different types of accessories.
Also, varto vrahuvat a number of bowls. The photo below shows the installation on a sink. Zmіshuvach varto pіdіbrati so, that the vein turned freely, and at the same vein it did not twist into the foundation, it did not show a flow and so far. Also, the goose can be expanded, so that water can be supplied at least to the center of the miyok. The ability to turn the goose at the zmishuvach, which is installed in the sink, is vіdminnoy rice itself of kitchen models. Those that are installed on ceramic micelles, sound such a function of relief.

Installation of a zmіshuvacha on a sink

Prices for hanging bowls for the kitchen

Hanging mitt for the kitchen

The most wide-ranging options for today are the following options:

Option 1. A classic of the genre is the crane-box zmishuvachi. The stinks are simple for their design, even more so, and if necessary, they can be repaired, so that you can get a repair kit.

Crane axlebox bronze zmishuvach

The noise of the water in such zmіshuvachas is observed when the crane-axle is laryngeal - this main detail is shown in the photo above. The stinks can quarrel with their vicons. Older options are reversible - so that the handle of the tap happens to turn the sprat once, so that it is normal to turn off the water. At the same time, the double-sided crane-tow is more popular - outside the opening of the crane comes after a slight turn of the handle.

Crane box

Crane axles can be ceramic or worm. The stench is breathed not by the materials of preparation, but functionally. At the first turn, there are two plates, which open at the singing places for water to pass, wrap around the axis and in the singing position, cross the passage, so that the options and will be reversed - if you turn them far behind the bend, then open it again you can say it. Worm mechanisms transfer the movement of the rod, which cuts off the water, twisting in a way or twisting along the cracked - werewolf crane-axle.

Option 2. A popular type of zmіshuvachіv is odnovazhіlnі. The stench fell in love with the coristuvachas with their good governance and high arrogance.

Tsіkavo know! The middle of such a changer is a cartridge that changes water. This detail is rich in why the term of the service to the viroba is used. You can substitute spare parts for availability. The density of the cartridges is freshly dried from the picker to the picker.

The design options for such zmishuvachs are too rich - it’s important that they can be restored to the beast, sideways to the side. Zagalom vibir you will be good.

Find out with one hand, and also learn about the attachment and instructions from a special article on our portal.

Video - How to change the thermostat

Up to one-size zmishuvachiv you can see and sump models, in the middle of which a special sump with openings is installed, which cuts off the water. Repair of such models will be twisted due to the lack of spare parts.

Option 3. More rіdkіsnimi and richly expensive models zmіshuvachіv є options with a thermostat. Why stink miracles? Such a zmіshuvacha also has two knobs-regulators, only the axis regulates the stench not like that. One of them only serves as a guide for pressure - you can work it with the strong or the weak, and the other one regulates the temperature. On it sound є graduyuvannya degrees Celsius. Having shown, for example, 30 degrees, You take the temperature of the water at the exit itself like this, moreover, the attachment itself will regulate the cold and hot water, as it fluctuates in the middle of the new.

Zmishuvach with thermostat

Tobto, admittedly, you bathe in the soul. Water temperature is ideal. And yet another tap at the booth and an onslaught, for example, hot water falls sharply, and as a result you stand still under a warm streamer. This is the case with sizable zmishuvachs, but not with thermostatic ones. Tsej prilad vіdrazu to change the intake of cold water, having saved the temperature at the exit. Chinny zmіshuvach dіє purely mechanically, if you want to know about more information, then marvel at the video in the article.

Option 4. Let's leave the list with the option of changing the electronic control. Tsey pristriy є іnnovatsіynym і, zvichayno, more expensive. Vіn miraculously fit into modern interior styles, for example, hi-tech.

Prices for popular models

Zmishuvach with electronic keruvannya

Repair of these fittings without the need for knowledge that mind, obviously, impossibly, prote stinks have proven themselves to be more reliable. They are controlled by powerful handles, which are wrapped around, with buttons, buttons and touch panels.

Please!Є variant with sensors that turn on if you move your hands or dishes. There are no necessary necessities to win such a home, shards can bring more than handlessness. Appointed stench is important for the public, de important є automatic control over the vitrata water.

It is even more important when choosing a zmishuvach, it is important to remember the method of yoga fixation. Give priority to the massive metal nuts, which can crush the great area of squeezing. Dribni are constantly twisting, that and tightening them richly folding.

Replacing the old zmishuvach with a new one

Replacement of a zmishuvach

Otzhe, we have recognized with you all the different zmishuvachiv and now we definitely won’t have mercy on their choice. Let's move on to the process of replacing the old plumbing fixture with a new one. For whom we have divided, we will prescribe everything necessary for whom and the order of the day.

Prices on popular models of zmishuvachiv

Zmishuvachi

Materials and tools

So that the robot has fewer problems, it is necessary to prepare all the advancing materials:

Tool, photo:	Description:
Razvіdny wrench	All the locks with the connection of the zmishuvach will be nutty, so we can’t do without a wrench in the robot. Varto stock up on two things - a big one and a small one, because all the nuts are of different sizes. Also, take small red keys at 10, 11 and 12. Stink can be in good luck there, which is not suitable for large rose keys. Nagodi may have a tubular head, but only if you have a strong zmishuvach - just small nuts, we have already written about the inadequacy of those.
Pasatizhi that twist	There are different situations, if you may need pliers - you can take it when tightening and so on. A flat twist may be needed for an hour to dismantle the old zmishuvach.
Container for water and dry ganchirki	For an hour, we work forward to turn the taps on the risers, in order to pin the water supply to the water intake point. It often happens that these taps stop normally trimming and constantly picking them up. To practice in dry minds, take a basin or a bucket and dry ganchirki.
	The strength of the zmishuvach is known to an importantly accessible and unilluminated area, that in a robotic lighter will not be occupied. You can beat the phone as an alternative replacement.
Mounting kit	Ring out everything you need to change the set, but there will be fluctuations, if the next thing is to change the details, for example, the eccentric. Therefore, reverse the manifestation of everything necessary.
Fum-strіchka	Strengthening of the twine z'єєdnan today is more important than the fum-strіchkoy. Її installation є reinsurance, oskіlki іz zavdannym may handle the gasket in the middle of the nut. Previously, the replacement of the line was won over by the shreds - a lot of plumbers gave a lot of credit and this year, so the material is even more superior, and when it comes with silicone and zovsim, it will not give a leak.
Silicone sealant	Silicone itself is a universal material, which has become an indispensable helper of modern plumbing in the world. In addition to such a tube, you will need a special pistol, so that you can see it in place.
P_vodka for water gnuchka	Such hoses must always be supplied with the kit, but the stench may be less than 30 cm long, which is not enough for all types. To that, come far ahead of us for the provision of necessary expenses. It is recommended to buy stainless steel bellows hoses. The stench is costlier, lower armored (in the photo is evil), but serve more richly.

Prices for silicone sealant

Silicone sealant

When you have prepared all the things that have been rehabilitated, you can boldly take up the work.

Video - How to replace the zmishuvach

Dismantling of old hoses and zmishuvach

Pokrokov's instruction - how to take an old zmishuvach

Krok 1. Water to the riser is cut off.

In order not to fill everything with water, dovkol, the water, obviously, needs to be cut off. We know the faucet on the riser, close it, after which we see it zmishuvach and reverify that everything is safe. Like a goose pidkopuє, then you happen to tinker with buckets, and like water flows through the door, you can’t start the job better. You will need to call an emergency service or a plumber, so that you can block the riser at the basement and replace the faulty faucet with a new one.

Water to the riser is interrupted

Please! If you have a miyka, then for the sake of clarity of work, you can change your coat. Sweat she will also turn around in the world.

Krok 2. Vіd'єdnanny postings.

We know the place for connecting wiring to pipes, take key for 24 and turn nuts. Just blow your plastic pipes, but the sound is very sticky, it can be skewed. In such a situation, it is recommended to additionally fix the pipe with a gas wrench through a ganchirochka, so as not to pass it.

Vіd'єdnanny postings

Break the nut out of place, but it’s even more important, for example, the installer applied silicone to the shreds. In such situations, varto report a singing zusilla. As soon as the detail is destroyed, it will be easier to twist it again. Do not use your hands to twist the water from the zmishuvach. In a first way, you will be more comfortable there, but in a different way, twist the hoses more often, which can lead to a change.

Krok 3. At the hose, that pipe may have a lot of water.

Before that, as if I’m tightening the nut, put the bottom of the z'ednanny zebra, so that the water from the pipes is not stored for a lieu.

As soon as you know zmishuvach at once with a miyka, it’s neobov’yazkovo, open the siphon from the sewer.

Zlivayemo excess water

Krok 4

At the onset stage, it is necessary to remove hoses from the zmishuvach. You can do it once, or else after the yogo znyatya. We may need a key on 10 or at 11, Fallow view of the hose. The cut of the key is found at the water ducts on different heights - it is richly simpler than the lower wigvintity, and only then the upper one.

Inspection of water supply

Krok 5. Turn the nut to remove the screw.

It’s normal to get under the miyka, well, don’t go out, look at it on the back of the zmishuvach - it’s better to use a hairpin with a nut, otherwise the nut is big, twisted on a thread at the base of the zmishuvach. Let's sweat the zmishuvach from the opening. Conducted next can not slip, as the opening at the miyts is already small, so twist them on the zmishuvachi and pull down.

Nut view

On whom the dismantling of the old plumbing fixture is completed.

Installed zmіshuvacha

Zmishuvachs can strike in a different way. Sound the stench already picked from the factory, but you still might need a deak pick. The aerator, watering can are screwed up, as if it was transferred to the construction of that system of reinforcement. All zmishuvachі raznі, you will not get confused by the instructions that reach them.

Please! When you choose a tap, do not report great zusils - people who improve water well. If you overtighten the z'єdnannya, then the risk of їх poshkodennya, and you may not be able to find the replacement of the required gaskets. So be careful with the chrome-plated casing - if you need a spanner wrench, then throw yoga through the soft ganchirochka. You can take the tongs, wrapping them in front with electrical tape.

How not to mess up the chrome vans covering the viroba

The system of reinforcement, as it was said, can be different. If you bought the option with studs, you will need to screw them in before installation. The front cut can be covered with lithol or similar oil, to save parts from corrosion and to facilitate their dismantling of the offensive time, if you need a change again.

Installation of a zmіshuvacha on a rented sink

The principle of installing a zmіshuvac on a sink is similar to yogo dismantling, about which we wrote more. You will understand the order in your own mind. The axis in the photo shows the animal that the new attachment is put on the turn of the mitt - so it’s easier to do it manually, even if you will have good access to all the details from the sides.

Hnuchka podvodka for pipes of cold and hot water

Now let's talk about the methods of fixing:

Krok 1. Storage of accessories.

Otzhe, in front of you is a long hairpin with a wide nut screwed onto it. There could be more details. Look at them from the ends and know the slotted notch (under the flat twist) - there will be a lower tip. Screw the hairpin all the way, but without fanaticism.

Attachment storage

Krok 2

The water pipes are twisted in the reverse order - on the back of the head with greater cuts, and then with a low one. Before that, if you want to put a ring gasket on the hoses - you can put it in the base of the zmishuvach, but you can fall. It is necessary to bring the hoses into the opening at the miytsi.

Installation of flexible water lines

Krok 3. Fixation through the pressure plate.

From below, a pressure plate is put on the studs, like in the photo. It can be gummed, otherwise the kit comes with an okrema gasket - the gum is placed between the metal parts of the entire structure. Then the screw studs are screwed on the nuts, so they need to be tightened to the stop. The axis is here and the moment comes, it’s time to tie such a fastener to the tightness - the wrench to the tightened nuts simply doesn’t fit, twist the pliers, but don’t start to tighten the fastener with them, it’s better to know the tubular ring wrench. It is recommended to bathe a similar option only when the zmishuvach is installed in the opening on the stylnitsa - the axis here is true to itself.

Fixation through the pressure plate

Fastening on the nut of the transmission is installed in the groove on the zmіshuvachі kіltsya ushchіlnyuvacha, zanurennya virobu in the opening and tightening the fastening. The photo below shows the fitting of a special wrench, but you may not need it, you can easily tighten the part by hand.

Fastening on a nut

Krok 4

Before that, how to tighten the cap nuts on the pipes, it is recommended to wrap it in sprat wraps with a fum-string or shreds, so chances are that it will flow more, it will be less. As if it is covered with plumbing lyon, then wrapping it around the thread, smear it with a stake with a drop of silicone sealant.

Enhanced carving

Krok 5. Installed additional gasket.

At the union nuts of the flexible insertion, rubber gaskets were installed from the factory. Turn over, so that the stench does not evaporate, otherwise you take the tekti behind the bag. It is also recommended to add one more layer, which will allow you to add less wraps when tightening the unique twisting of the z'ednannya.

Installed additional gasket

After all preparations, the nuts can be tightened. We'll open the back of our hands, and then we'll use a wrench on the pivobert. Open the feed valve to the riser and turn it over so that it does not drip here. For consumption, hold out until the last stop of the leak.

Everything is now new zmіshuvachem can be boldly koristuvatisya. What else would you like to say about the completed material? First - for those, as it will be better to fix the zmishuvach on the miyts, rich in what the tovshchina is pouring into. It’s like a thin badge, any kind of fixation can’t be a movie - all the time it’s rozbovtaetsya and z’dnannya happens to be pulled. On the other hand, when tightening the nuts on the connections, do not allow the hoses to be twisted; І third - you will be wet, angry with the wanderer, as if you hadn’t done anything like that before, be calm, cold-blooded, lively. Good luck with your robot!