How to protect electricity from a private booth is illegal. Saving electricity using legal methods. simple and effective ways to save electricity

⁰

If there is a desire for a certain product, a proposition appears. Prices for electricity, which are steadily increasing, have given rise to a large number of “miracle devices” (for example, Electricity saving box), which promise a significant change in energy consumption. Their action is based on the conversion of active reactive energy. However, the scheme of such installations is simple, so that it is practical, no matter how foreign the technology, to create an energy saver with your own hands.

Self-propelled device for saving electricity, operating principle

The basic principle is that any electrical force consists of reactive and active energy. Korisna is active in the future, and it will activate all mechanisms. Reactive, however, tends to reduce the efficiency of the energy system. Adjusting the structure (mechanical and electrical devices) means that there is a lot of energy available, which is used by everyday companions.

Industrial enterprises pay for reactive energy as they rely on special doctors. It is created by mechanisms with high inductive storage (for example, electric motors), and in plants and factories it is largely replaced with the help of special capacitor units.

Doctors have described ideas about how to create your own supplies for the world. The engine has reactive energy and primary mechanisms with electric motors (food processor, hair dryer, vacuum cleaner, refrigerator, drill). On the other hand, there are devices that require a permanent source (TVs and monitors). Therefore, they began to develop a scheme for which the electricity supply would be transformed into active reactive energy.

The theoretical basis of the scheme of a self-sufficient economy

The essence of the Ekonoye Poleg, in the one, the navantazhennya does not live in the end of the zynem clam, but the vid of the pid -circulated capacitor, the charge of the Yaku is vibroly vibrants of the bosom frequency, at the same time, the sinuses of sinuses in the Merezhі. Electrical heaters are equipped with an input induction converter with low sensitivity to high-frequency streams. As a result of this impulse, the healer suffers from a significant negative loss.

For the creation I will add the following parts:

microcircuit (K155 LAZ),
zener diode (D2-KS156A),
diodi (D1 - D226B; Br2 - D242B; Br1 - D232A),
transistors (TZ - KT315, T2 - KT815V, T1 - KT848A),
high-frequency capacitors (C2, SZ - 0.1 µF, C1-1 µF x 400V),
electrolytic capacitors (C5 - 1000 µF x 16V, C4 - 1000 µF x 50B),
low-power transformer 220/36,
resistors (RЗ - 56 Ohm; R1, R2 - 27 kOhm; R5 -22 kOhm; R4 - 3 kOhm; R6 - 10 Ohm; R7, R9 - 560 Ohm; R8 - 1.5 kOhm).

The folding is carried out according to scheme 1. Transistors are installed using insulating gaskets on a radiator of 150 sq. cm. Obov'yazkovo zastovovat swimming trunks. The low-voltage power supply unit is required to supply 36 V output, 2 A and 5 V to power the generator, which forms pulses with an reference frequency of 2 kHz and an amplitude of 5 V. When the circuit is formed, it is necessary to check the operating mode using additional information. Cylograph. After which the capacitor is connected.

The selected devices are insured for 1 kW. It is recommended to install the device at its nominal value or turn it off when the pressure is removed; if the device is not turned on, the device will experience a significant degree of weariness, which must be checked by a physician.

Applying the insurance of food with a change of supply for casual living companions. Voltage – 1 kW/year, voltage – 220 V. Selected devices are connected to the outlet and live in the same location, in which grounding is not required. Due to breakdowns, when such a self-contained economy is connected, the healthcare provider loses 25% of the electrical costs.

Scheme 2 has also been developed, which allows people to live together, who work both on a steady and alternating stove (stones, electric stoves, lighting, water heaters). The main latches include the presence of such devices as elements such as those used for alternating flows (transformers, electric motors).

Do-it-yourself devices for saving electricity |

Farmers are extremely proud that an attempt to imbue in household minds the principle of industrial capacitor installations that accumulate reactive energy is doomed to failure. Compensators for the reactive pressure of the industry - rather than using bulky devices, protecting the soil on the pressure of the industry and ensuring low additional parameters. In addition, most modern home appliances already have sufficient reactive energy capture capacitors built into their design.

A large number of commentators and fakers point to the fact that such devices are correct and clear, and only doctors of the old induction type are deceiving. Electronic devices are used to generate energy and, in addition to attractive devices, they often fail to notice such interference with themselves; the microcircuits in them burn out. This leads to the need to replace the device and an unacceptable arrangement with energy bills, which threatens a fine with a lot of zeros.

However, replacing a doctor is not the worst that can happen if an amateur takes on such a delicate matter as electrical engineering. Doctors often do not have the best electrical wiring in Russian cabins and apartments, such self-indulgence can result in short circuits and even worse.

People, buried in traces of electricity, create various devices, there are hundreds of them on the Internet. However, this does not mean at all that you need to try all their wines from your donkey, risking the power of life.

03.11.16 208 282 20

Myths and mercy

Hello, my name is Yulia, my fellow electrician. We recently moved to a new cabin.

Yulia Medvedeva

Bula is friends with an electrician

The next day after my boyfriend moved, he changed all the light bulbs. It seems like it’s more economical. Even if I decided to change the refrigerator to an energy-efficient one, I got tired of it. It turned out that not all savings on electricity are significant.

Expensive, uneconomical, wasteful

Pobutova equipment class A, A+

Equipment with a high level of energy efficiency was produced using the best method of economy. This is one of the arguments to replace the refrigerator and washing machine with a new one.

It was clear that the savings here were not as obvious as the labels suggested. Today's high-class consumer technology has much less energy, while lower-class technology uses much less energy. It’s just that in the same cold year you’ll freeze harder, be more careful and turn the drum faster.

Energy efficient? So, on the other hand: there is no less energy, just more efficiency.

For example, a refrigerator with energy efficiency class B consumes 485 kilowatt-year per river. A similar refrigerator with a similar number of chambers with class A+ has a capacity of 272 kilowatt-years per river.

A new refrigerator costs 30,000 rubles. Well, judging by the savings, it will pay off in 30 rubles. However, while the old one is working properly, its replacement will not bring significant savings. If the old man gets angry, you can gain respect on the model cheaper. A price of 10-15 thousand rubles is beneficial for the family budget, while saving 1000 rubles per river on electricity.

Expensive, uneconomical, costly

New electrical wiring

The apartment we moved to has old aluminum wiring, but it’s laid out well and could use a dozen more cables. We decided that replacing the electricity would help.

Fahivtsi are pleased to replace aluminum wiring with copper, because copper has less electrical consumption, and is therefore more economical. In order to determine the tension costs for aluminum wiring and equalize them with the costs for copper wiring, we used a special calculator.

The calculator showed the difference in voltage between aluminum and copper wiring of 4.75 volts. The electric doctor doesn’t charge volts, but kilowatts.

To convert one to the other, we multiplied the voltage of 4.75 volts by the power supply of 4.12 amperes and subtracted the power of 19.57 watts per year or 0.0196 kW-year. We multiplied the values by 24 years, by 365 days of birth by 5.38 rubles per tariff and subtracted 922 rubles in savings per river.

922 R copper wiring is protected on the river

For our apartment, the cost of replacing the wiring costs about 100 thousand rubles, plus finishing the walls and floors. Looks like it will pay off in about 100 rubles.

It is important to change the wiring if you live in an old house, your wiring will spark or smoke every now and then, or sometimes there will be voltage drops. These new activities can change your life. And it’s not worth it anyway.

Cheap, economical, easy

Switching and switching sensors

The light in the apartment can be controlled by buttons, or by sensors. The sensor is a box that hangs on the wall or table and turns on the light when it gets dark or when it gets close. For example, as long as you walk along the corridor, the light will be on. Viishli - having become involved.

A simple dart sensor operates like a basic signal, responds to the level of brightness, changes sound and costs 300 rubles. One electrician is responsible for the installation and connections.

The sensors will help protect you if you often forget to turn off the light in dark areas. The light bulbs flicker and they won’t let them go out when it’s light outside or when the room is empty.

At your home, it is important to know the place for the effective installation of such sensors. Most often they are placed near toilets. If you have a small toilet, then a sensor that reacts to the toilet is a good idea. In large and stretched applications, it is possible to install a number of sensors and connect them to each other. This system is less reliable.

It is not easy to protect such a sensor. If you notice that the lamp has been forgotten to light all night, you will have to pay 4 rubles for the tariff. If you forget to wipe the lights, then you can save 1,460 rubles.

4 R have to pay for a light bulb to be turned on

Dart sensors for the forests of Budinki or cottages. You can install a sensor in the yard that reacts to both the brightness level and the power level. Then you will sleep lightly until the dark hour, if you want to go out into the street or go to the booth. The garage needs a simple roc sensor. You should turn on the light when the car enters the garage, and turn it off if there is no one left in the area.

Too expensive, uneconomical, worthless

Droneless sensors

Extremely jerky sensors are inserted into the power grid - roughly appearing to crash between the power line and the light bulb that needs to be lit. And also droneless sensors.

Drill-free sensors are a modern, fashionable, boring, but also very expensive way to save money. They may be connected to the “smart home” system, which turns on a special controller and a number of other mechanisms.

All about how to live in Russia

І interaction with CC and vessels – in our opinion. Subscribe so you don't miss important articles

The sensors turn on and blink lightly depending on the light level, respond to the sounds of roaring and listen to commands from the remote control or controller. The stench does not just fade lightly, as it is not needed, but allows you to muffle the lightening or, on the contrary, add brightness. With this help, you can clean the lighted booth on the riser, for example, if you went to the exit. No more forgotten dust or lamps in empty rooms.

Installation of such a system costs approximately 200,000 rubles. A solar battery or a wind turbine costs another 200,000. For a maximum saving of 10,000 rubles per river, the costs will be paid off in at least 20 rubles. Such investments make sense for the private bank you want to earn independently.

Costless, uneconomical, costly

Unplug the charger from the sockets

Charging devices at sockets are often called passive companions. Enthusiasts conducted research and found that 7 chargers plugged into the outlet cost only 2.5 kilowatt-years, which costs 13 rubles 45 kopecks.

However, it’s still not possible to remove chargers from sockets, because they can cause a stink - especially since chargers cost three kopecks from China. The internal transformer may overheat due to power surges, and the charging unit may burn out.

Cheap, economical, cool

Energy-saving light bulbs

We appreciate that in modern heating systems, one light-emitting lamp consumes 84% less electricity. Over 100 years, a robotic frying lamp burns 7.5 kilowatts, or 40.35 rubles. I snagged 20 light bulbs from our apartment. Their skin burns for about 300 years per river. At the same time, we pay 2421 karbovanets for all the light bulbs. If you replace them with light-emitting diodes, you will pay 387.36 rubles.

Light-emitting diode lamps have a characteristic light temperature. It varies from a warm light, like the standard frying lamps, to a cold light, like the sun in gloomy weather. The light temperature is indicated for the packaging. It's a shame: in the community it's colder, in the special ones it's warmer.

To avoid overdoing the brightness of the light, choose lamps with an output of 100-200 lumens per square meter.

The brightness of the light bulb. The more, the brighter

Svetlova temperature

This lamp shines approximately the same as a 40 W roasting lamp.

Light-emitting diode lamps cost more expensively, but last longer, so they compensate for the difference in prices. Extra savings – 2000 rubles per river.

Cheap, economical, cool

High tariff rates for hospitals

It is helpful to protect if you work a lot, leave home early and work late. If the date of your activity falls on the hour from the 23rd to the 7th day, then you can reduce the cost of electricity by 2 or 3 times.

The primary tariff in Moscow is 5.38 rubles per kilowatt-year. With a double-tariff hospital, the nightly tariff is three times lower - 1.64 rubles per kilowatt-year. The exact amount of savings depends on your way of living and the way your life is organized.

We pay about 6,000 rubles per river for electrics. If we had destroyed the anniversary of our activity at this hour and switched to double-tariff payment, we could have saved 3,000 rubles on the river. It is unlikely that you will be able to save more, given that people tend to work steadily, and on weekends they are unlikely to be able to spend evenings without light.

If you have decided that this method of saving is right for you, call Mosenergozbut and submit an application for the appointment of a new physician. For the doctor and robot master you will pay close to 5,000 rubles. This investment will pay off in two ways.

Cost-free, economical, costly

Electrical equipment

In the original apartment, the TV is constantly on: stand-by mode - 0.01 kW-year per year, or 87.6 kW-year per river, personal computer with monitor - 700.8 kW-year per year, laser printer - 438 kW-year per river, home cinema - 131.4 kW-year per river, micro-hair stove with timer - 52.6 kW-year per river.

We added up all the prices and multiplied them by the tariff. They took 7588 rubles per river. You won’t be able to protect just as much, even if you put it all together, you’ll only need to spend a few hours to get it, or 3-5 thousand rubles per river - in total.

In order not to run around the house and not to remove the plugs from the sockets, you can call an electrician once and ask him to connect the refrigerator socket to the same machine at the panel. These devices can be installed at the shield before leaving the house.

Manipulations with the doctor

People believe that the best way to save money is to steal. They saw different ways to endlessly spoil the doctor.

The simplest way is to connect the neutral wire to the doctor, and ground the other end to the battery. However, the current healer does not give in to this manipulation of respect and continues to respect it. And from the battery, which is a strum, it is unacceptable.

A simpler method is to break the electric lance and let the stream bypass the doctor behind the help of a secret bridge. Independent installation of jumpers and other manipulations with wiring can lead to breakdown, short circuit, fire and death of people. Be careful yourself and be ahead of others.

Mosenergozbut regularly checks doctors in booths and apartments. If the verification reveals that the healer of the crimes, the authorities are willing to pay the penalty, which Mosenergozbut is charged with, and the administrative fine.

Remember

Do not help to protect: new equipment class AA+, new electrical wiring, on and off sensors, manipulations with the doctor, unplugging charging devices from sockets.
Save electricity and pennies: energy-saving light bulbs, high-rate treatments, electrical appliances.

Turn off the light when moving from room to room. Install heat sensors in the roc, which will change the light for you.
Check out the lighting of the place: lighting, floor lamps, sconces. For example, in order not to turn on the main lights right away, it is better to install a light fixture in the room.
Remember that cleanliness is a guarantee of economy. Dark windows and dusty lampshades reduce the level of lightening in the room by up to 35%.
When repairing, make sure that light walls are exposed to up to 80% of the light flow, and dark walls - about 12%.
Replace the frying light bulbs with energy-saving and LED ones. Replacing just one lamp can save you about 1000 rubles per river.

Let's take Moscow, for example. 1 kW year near the capital costs Tariffs for electricity for the population and up to a new category of residents in the territory of the Moscow metro station, following the Trinity and Novomoskovsk administrative districts 5.38 rubles. It is obvious that three apartments have three light bulbs on at all times: LED, energy-saving and frying. For an objective picture, we choose lamps of such intensity that the smell gives approximately the same level of lightness. The first axis we are retracting.

Type of lamp	Light one	Energy saving	Nakalyuvannya
Pressure, kW	0,013	0,025	0,1
Lamp life, one year old	50 000	8 000	1 000
Lamp varity, rub.	248	200	11
Year of use Year of operation = rate × intensity + lamp rating ⁄ resource, rub.	0,0749	0,1595	0,549
Godin's economy Yearly savings = performance of the lamp ignition - performance of the lamp, which is equal., rub.	0,4741	0,3895	-
Term of totality The term of amortization in years = (lamp varity – varity of the frying lamp) ⁄ yearly savings, one year old	499,89	485,24	-
Term of totality Payback term in days = payback term in years ⁄ 8, days	62,49	60,65	-
River economy River savings = (8 × 365 - term of return in years) × yearly savings, rub.	1147,37	948,34	-

It turns out that in two months one energy-saving lamp will allow you to save 40 kopecks, and 10 light bulbs - 4 rubles.

Handle electrical equipment correctly

In accordance with the double tariff, turn on all non-essential electrical appliances at night, and chargers after the equipment has been fully upgraded.
The refrigerator must be defrosted regularly, as it does not have a special No Frost system. Quilt so that the standing devices are clear of the scorching devices and natural ventilation of the back wall is ensured. Place some refrigerated dishes in the new one!
Make sure that the burners on your electric stove are working properly and place only level-bottomed dishes on them.
Cover saucepans and frying pans with crusts: the stench will reduce the loss of heat almost immediately.
Be careful not to over-engineer the original machine (overworldly it will increase electrical waste by up to 10%) and maintain an average temperature regime. 35% less energy is wasted at a distance of 30 degrees, while at a distance of 40 degrees.
Use an electric kettle instead of an electric stove to heat up water. This way it will be much more economical. Boil only the volume of liquid required at a time.
Clean the air conditioner fans and filters regularly.
It is important to note that a low temperature regime is required after soaking the powder.
Do not leave equipment, including microwave ovens, TVs, computers, scanners, printers, modems, in the cleaning mode. It is possible to save over 200 kW on the river.
Install electrical sockets with a timer.

Buy energy-saving household appliances

All electrical appliances are marked with Latin letters from A+++ to G. Choose equipment with a low energy class, marked A and B.
Buy devices and use new technologies for saving energy. For example, induction cooktops, which only heat the bottom of the pan and waste energy efficiently, are becoming increasingly popular. The efficiency factor of such slabs is 95%!

Install a double-tariff treatment plan

The double-tariff doctor allows you to stay at night. Such doctors are ideal for those who can use energy-intensive household appliances: dishwasher and washing machine, bread maker - from 23.00 to 7.00. In the middle, the healer pays for himself with a long life.

Don't waste the warmth for nothing

Instead of a traditional heater, use an air conditioner to adjust the heating mode. As the vibrator allows, of course. Most air conditioners cannot be blamed for negative temperatures.
Infrared heating is 30-80% more economical than others.
If there are electric batteries installed in the booth, make sure to keep them clean so that you drink without losing some of the heat, and you do not have to increase the temperature.
Vikorist water heater, change the water heating temperature.
Replace the storage water heater with a flow-through one. This way, you won’t waste electricity by constantly adjusting the temperature of the water.
Heat the water as needed. Connect the boiler to electricity when you leave the house at night.
Clean your water heater every month to increase energy consumption by 15–20%.
- Remove the appliance from the drain and turn off the water supply.
- Add water to the top.
- Remove the boiler cap, carefully remove the darts and unscrew the thermostat.
- Unscrew the nuts to flatten the flange. Push the flange up, turn it and pull it out.
- Now you can clean the heating element with a metal brush. Try pouring additional help and dilution of otic acid and hot water (1: 5). Just place in a new TEN for 30 minutes and keep an eye on it so that the gum does not stick with the acid.

The path to financial opportunity begins with friction, starting with those who are most likely to reach it. There are legends about the brands that are curious, and there are so many legends about them: Henry Ford dressed only in the most modest stores, the founder of IKEA Ingvar Kampad, who spent his whole life traveling on public transport as a temporary pensioner, his own coins having developed the concept of the company. Perhaps, we are looking for ideas on how to save on electricity and in a way that is truly the first step to finding a secret, so why are we rich? For anyone, these simple secrets can help you save up to a third of your family budget.

Global optimization of living space by saving energy

If you plan to save on electricity, you can later organize a booth and do it in such a way as to avoid unnecessary and unprincipled expenses. For those who have already acquired meters and completed a major overhaul, these are unlikely to be relevant. If you only plan to buy an apartment and choose from the upcoming ruler, some moments can be taken care of in advance.

Roztashuvannya apartments and vikon

Nothing allows you to save so much on electricity, as the amount of natural light and heat is great. Such minds will be protected by windows and balconies that face the sunny side. As a result, apartments “for the day” are priced much more expensively on the market for non-depreciation. However, your expenses will pay off in spades: the ability to turn on individual lighting later in the year gives, regardless of caution, up to a 2% reduction in expenses. If you warm up and warm up such a place faster, and indoor plants and aquariums require less additional heating, you can safely increase this figure to 5%.

The height of the object is significant: the first surface of the narrow streets is covered with courthouses. At the end of the sun and descent, while the upper tiers are still well lit, on the first tiers and in the basements it is already dark. Therefore, you won’t have to spend money on the space to ensure that the chandelier is turned on and save energy, so you can see the middle surfaces, which are just as comfortable in terms of living.

As we talk about heat-saving techniques, it is recommended to move out of the apartments and place them above the arches.

The owners of attics and apartments will overpay for heating installations. The outermost passages, as a rule, are also ventilated and require additional heating.

Decoration of windows and balconies

Since changing the apartment itself through the need to shorten the figure in the payment is nonsense, then it is possible to take advantage of the energy saving factor during repairs. We are in the process of cleaning up the windows and balconies. And in this regard, food saving is a medal with two sides. Buying a cheap and unclear glass package will result in the need for heating throughout the cold period. Rami is guilty of being rich-chambered, and Shibki is totish. If the shortening of light conductivity plays against the need for natural light, it is necessary to use piece dzherels as soon as possible. Obviously, the frames should be as narrow as possible, and the glass should be as smooth as possible. Mriya - panoramic windows, as the layout and area of the premises allow such architectural development.

The balcony, the loggia, and the room itself, if it is not sufficiently insulated, needs to be thoroughly insulated. The money spent on purchasing a roll of Pinoplex or mineral wool will pay off in the bitterly cold winter.

It is important to note that the appearance of wide windows does not interfere with the power supply, but it still needs to ensure functionality. When choosing frames, it is necessary to consider the model in order to help quickly refresh and ventilate the area, rather than dry it out. When choosing curtains or blinds, priority is given to the set with the possibility of partial and uneven darkening. These are either light tulle that obscures the view, or thick tapestries, or Japanese canvases that can be unfurled. This way you can create an intimate atmosphere not by turning on the sconces, but by frequently closing the doors.

Decoration of the premises

Cosmetic repairs, not surprisingly, depend on the success of the implementation of the idea to save on the necessary resources. The lamps will be used less often if light colors are chosen for the walls. The soft furniture creates a feeling of warmth and calm, while the steel and dark shades are likely to cry out as a result of the chill. Throwing a blanket over the chair, which is also an effective accessory, minimizes the need to turn on the heater.

The warmest tones - caramel, "cava with milk", vanilla - tend to sound sparkling. Decorating a room in such colors, from walls to textiles, can effectively enhance the desire for light heat.

Accept what you are allowed to protect on the electric train

Since a radical refurbishment of a real nest still requires time and effort, then in addition to measures that allow you to save electricity, implement the mittev. If we take into account all these secrets, energy savings can reach another 5-7%:

LED and light lamps effectively reduce the fluidity of the medical device. Before that, they will have to be changed much earlier than the frying lamps.
Sensors and dimers that completely fade out - it is practical to not turn off the light where it is not needed. Don't forget the stench and leave the light bulb on.
Installation of spotlights in important areas of the living area allows you to not turn on the lights in the entire room, as needed, for example, above the chairs. Table lamps, sconces and floor lamps decorate the room and make it possible not to burn the lamp chandelier unnecessarily.
Before the chandelier, which contains a number of lamps or lamps, you need to align the number of buttons. This way you can turn on only part of the device, since there is no need for bright illumination.
All electrical devices are required to undergo the highest level of control upon purchase. The class of energy-efficient devices is designated as A, AA, AAA. The small mark-up that such technology takes from the manufacturer pays for itself in the first place.
With old electrical appliances, kettles and heaters, as well as tube TVs and sanders, you can get rid of them. These devices literally eat electricity. New models, developed through innovative projects, are much more intelligent and energy efficient. If you save energy, your satisfaction with them can also be reflected in your profits.
Thermal screens, which can be made independently from foil and cardboard, greatly increase the efficiency of batteries and other heaters. The placement of such platinum for possession will allow you to mix it up.
Models with unique features (cars), with autonomous operation of several segments (refrigerator and freezer), hibernation modes for computers and laptops can save money if the owner competently uses these functions.
It’s not enough to buy a good attachment; you need to use it correctly. Non-weapon heating and support in the “readiness” of the device are the most praised villains. A year on the washing machine, micro-hair stove, stove and refrigerator is hardly necessary. And if the refrigerator cannot be turned on, then the “washing machine” and the water cooker will “hang” on the socket. Wash down all the devices before leaving - a good practice, but not a difficult one. Output – special connectors with a special connection button. The axle on the new one needs to be placed in order to connect the entire kitchen electrical architecture.
It’s okay to say about the refrigerator as about the head electrician in the kitchen. It has been written more than once about the necessity of buying a large wardrobe for a family of two. It is also better to allow the products that were ruined by the police to be thrown out sooner. You can also save energy by relocating the refrigerator: if you insert a battery into it, the cost will be reduced by almost 10%. The same savings come from not putting hot foods in the refrigerator. In winter, the balcony fits well with the cooling functions.

One of the most effective methods to protect electricity is the installation of a dual-tariff system. Combined with the functions of the included starter, this device costs 2 times less than pennies for the same operations. At night, washing machines and dishwashers, bread makers and multicookers can be used. The period of effective use is from 23 to 7 years of age.

Tim, who has an electric stove in his apartment instead of a gas stove, would like to clarify in advance so as not to rely on the waste electricity. For vulnerable and socially disadvantaged communities, the same food must be provided to social services. According to the statistics, the 4th citizen does not suspect his rights.

Save every single ruble - save electricity

It is a pleasure to protect electricity for many who are skeptical. The calculation of the surplus is due to the fact that all these technologies give about 200-300 rubles a month, which for most people is absolutely uncritical. As a matter of fact, the audience unplugs the phone chargers from the sockets and bursts into laughter. But such festivities were carried out in a small apartment with only two burghers. It is easy to notice that the skin from the household increases the cost by at least 30%. The family budget is already a serious figure. And for the sake of it, it’s time to look at your names, and what’s more, they won’t force any special difficulties out of them.

As they walk, they turn off the light and howl and cry even more than the heavenly hours. It’s a good time to still pay attention to the current situation in order to protect yourselves on the electric train.
If it is worn out, kettles with scale and not cleaned, the cleaners lose the effectiveness of the robot, making operation more difficult. Your service can be shortened and spent.
General cleaning is required for both windows and lampshades of lighting fixtures. It's bad for the lampshades to let in light and make it difficult to turn on the additional light sockets.
Benefits of savings can be found in the skin treatment process. Whiteness can be ironed much faster if it has been ironed beforehand. The soaking process allows you to shorten the hour of conflict. Maximum speed and boiling for one hour are not required for most items.
The rest of the seasoning can be done on a very warm stove with it turned on.
A small 1-cup coffee pot allows you to avoid boiling the kettle for one evening. The principle of the necessary and the sufficient is an important warehouse economy.

Psychologists claim that all skills are formed in 21 days. If you do just 3 basic things, using a few simple steps, you can save yourself a small premium from the additional savings on electricity.

The production of energy and various types of burning with skin cancer is becoming more and more expensive for humanity, so many people are overwhelmed by the problem of saving electricity. Nowadays, almost every adult person is hungry for food, so they can especially earn money themselves in order to change the energy consumption in their home.

Every person can save electricity in their home without resorting to dubious and illegal devices. In order to get used to the process, we encourage you to become familiar with the decal-brown varieties:

High acidity will help you protect your electricity everyday technology, because now there are energy-saving modes. In addition, it is important to note that for the effective operation of home appliances, it is necessary to correctly monitor them. As a butt, you can adjust the basic refrigerator and freezer compartment. As a rule, all modern refrigerators have a lower energy efficiency class, lower than those of Radian’s predecessors. However, no matter what, refrigerators, or rather freezers, still need to be defrosted periodically. This refrigerator uses less electricity and will last you for a long time.
In all civilized countries, all noble gentlemen already know that at rush hour, if pressure on the electrical line increases, it is impossible to turn on any additional electrical devices. It is considerable for the Ekononiye Eknodroenergi ї in Pershu Cherga Treba Vitrachi RIVNENNE, that at that time, if people are tired of the Robot of the NEWS NOT, they are more painful to the VID of the inclusive of the Technician.
Make it a rule about once per river tighten the nuts tighter and the details in the electrical equipment and contacts available to you at the edge. Therefore, you can appreciate that the electricity in your home is more economical and will serve you for many years. In addition, such preventive visits will help eliminate unsafe situations.
To reduce energy consumption when using electric stoves, it is necessary to regularly check how tightly the bottoms of frying pans and saucepans fit against the burners. Having identified the “gap”, you can put it in with the help of special soft ring gaskets.
If you need to heat up a lot of water, Place a large saucepan on the electric stove Even in it, the water will heat up faster than in several small saucepans.
To effectively save energy, it is necessary to adjust the diameter of the bottom of the pot. The fault is either due to the diameter of the burner on your electric stove, or the crumbs go beyond it.
If the surface of the burner on the electric stove is bulging, it is necessary to replace it immediately, as the waste of electricity on it will be simply great.
Do not forget about the thermal energy of the burners of current electric stoves: turn them on a little earlier, and turn them on later.
When you are ready, apply the stitches so that the skin is smooth tightly covered with a lid Otherwise, you will lose some of the heat with the steam.
Do not press the electric stove burners to maximum heat, as this will result in excessive energy consumption.
Cook steamed urchin using the same method: place a saucepan on the burner, and then place another saucepan on it. You will see that the hedgehog near the top pan is being steamed.
For cooking hedgehogs on an electric stove, use dishes with a thick bottom.
Remember that pressure cookers help to save not only your time, but also your electricity.
After turning off the electric oven, try fill in as much as possible.
Do not use an electric stove to heat the area.
Microhair and low-frequency ovens are simply indispensable for the smooth heating of hedgehogs.
When boiling vegetables, pour the least amount of water into the pan.
Add an electric kettle equipped with a whistle and a special thermal spitter.
If you need a little dill, do not heat the entire kettle at once.
Descale electric kettles promptly; any debris will significantly reduce their efficiency.
Vikorista thermosi.
Try your best vikorystuvati natural lightening And drink lightly later.
Add lamps equipped with special energy-saving lamps.
Give your edge to fluorescent lamps.
Regularly wipe down the lamps to remove any debris to help preserve the brightness of the light.
Install special light regulators in your booth.
Do not set the refrigerator thermostat to the maximum setting.
Remember that the saw will work more economically because its filters will be better cleaned by the saw.
Vikorist special timer devices, which automatically vibrates the operating equipment.
Try to use this “different” household appliances as soon as possible: electric fireplaces, fans, boilers, etc.
Insulate the entrance doors and windows, which will help you save heat and reduce energy consumption.
Do not cover radiators with furniture or curtains, as this will reduce their heating capacity.
Dodatkovo insulate the underlay and the wall.

We pad the pouches

As you have already realized, in fact, saving electricity comes primarily from the right side. All you have to do is establish simple rules for yourself and strictly adhere to them. In this case, you can yourself reduce the amount of electrical energy consumed in your home, and in this case you do not need to resort to illegal roads and, as a rule, illegal devices.