The trojan is alive. Trojans with zhersts with their own hands Trojans with zhersts with their own hands

⁰

The metal Trojan is a stylish embellishment for any interior. Such a flower will never lose its value, but if made with your own hands, it will become an original gift for a loved one. It’s easy to get hold of such an unimportant ticket. You also need to stock up on terpenes, as well as the necessary tools.

What is needed to prepare a metal trojan?

To create a metal sheet, you need to prepare the following materials:

smooth metal sheet, thickness approximately 5 mm;
a steel rod for a trojan stem with a diameter of about 10 mm;
anti-corrosion agent or motor oil for cleaning the virobu.

Necessary tools for decorating:

grinder or grinding machine with two types of discs - for grinding and cutting;
drill for robots with metal and drills up to 1 cm in diameter;
pliers and pliers;
wire cutters;
cooking apparatus;
gas burner;
hammer and forge.

It is best to prepare the cake in the open air or in a room that is ventilated. It is important to follow safety precautions when working with tools and metal. Having secured all the necessary equipment, you can begin preparing the Trojan.

The process of preparing pellets for metal trojans

To prepare a flower bud, we cut at least four squares of 10x10 cm from a sheet of metal. The more pellets, the more colorful and luxurious our trojan will be. With the help of a regular felt-tip pen, sketches of the pellets are drawn on the blanks, which are then smoothed with a grinder or a sander. There is no need to cut them completely.

Next you need to give the workpiece the required texture. For whom the vikorist is a hammer and a forge. With gentle blows of a hammer, we flatten the edges of the pellets on one side. These will then need to be harvested from the new leaves of the stem.

To plant our petals on the stem, you need to make a special hole in its center. For this you can vikoristovvati drill and brew. When drilling, drill an opening at the center of the skin pellet equal to the diameter of the stem of the flower. The boiling process is carried out at the welded openings of the required diameter behind the electrode of the cooking apparatus. Robimo, be careful so as not to open the door any further than necessary.

After the pellet blanks are ready, we press them onto a metal rod and weld them to it. The first blank for the pellet is pressed onto a rod, leaving about 2 cm at the end. The pellets are spread crosswise. When connecting the pellets to the stem of the flower, be careful to melt the rod more, as the metal pellets are thin and may burn. The lower petals are folded downwards, forming the sepal of the flower.
To give the pellets the required shape, use a gas pan and then heat the pot. Then, using pliers, we bend the central pellets in the middle, and the others around them. Once you have eaten the beads, you need to bend the edges a little.

Preparation of metal Trojan leaves

Around the bud itself, it is necessary to add the stem of the flower to the leaves. For this purpose, on a metal arch, we draw a sketch of the future leaves and trace them with the help of an angle grinder. Add small notches along the edges of the leaves and make sure their little bits are fluffy, so that it looks natural. The finished leaves are joined to the stem using the boiling method.

In this way, you can weld the flowers and metal spikes, which are shaped like small tricutaneous plants, to the stem. If the stem is too old, it can be trimmed with a grinder. The average length of such a stem is 40 - 50 cm.

Treating Trojans against Corrosion

The remaining stages of the creation of the metal sheet will be treated with anti-corrosion treatment. If you can’t earn anything, you will soon waste your income. With this method you can use varnish or sawn varnish. It’s really easy to add a special mixture into a can, either silver or golden color. Apply it manually and evenly onto the brush and dry quickly.

Another method of processing is used with the use of virgin motor oil. Apply it to the front of the baked goods, soaking up the elements. After this, the tray is heated again to remove the corn oil. Using this method will give you a noble dark color. An elegant gift for those ready to go.

With just minimal skills in working with metal, you can master original and beautiful speeches. One of them is a trojan, stylish and original. You will become a wonderful gift and decorate your home interior. Here we will look at how to create a metal war with your own hands. Information about the chair and size is also provided.

List of materials and tools

We need such devices in order to prepare a trojan with metal with our own hands (a photo of the work is presented in the article):

Bulgarian;
cut sanding machine;
discs for the machine: grinding, cutting;
drill;
drills of variable diameter up to one centimeter;
gas stove;
round, flat, long-nose pliers;
wire cutters;
hammer;
pasatizhi;
kovadlo;
sawdust;
marker;
beastly apparatus.

Materials you need to stock up on:

with a metal rod (stem of the mighty Trojan);
sheet metal;
untreated motor oil.

The list of parts is as large as it is

To prepare the Trojans we need the following parts:

First outer leaf – 5 petals.
Another leaf of a smaller diameter - 4 pellets.
The third sheet of the same diameter - 4 pellets;
The fourth sheet of trochka has a smaller diameter - 3 pelyuski.
Fifth leaf (propeller of a smaller diameter) - 4 narrow pellets.
Five-leaf mirror.

For the stem:

2-4 pieces of needles.
Leaves 2-4 per stem.

Armchair pelustok

The sheet metal is cut into four or more squares (depending on the volume of the trojan) measuring 10 centimeters by 10. The trojan's patterns are painted on them with a marker. On one of the squares to sit a figure, I go to the troyand of winds. This square will be a blank for the sepals of the future flower. To achieve greater realism, it is not necessary to achieve perfect symmetry.

Use a grinder or a grinder to trim the tryandi petals, but do not cut them completely. After completing this preparation, flatten the petals, leaves and sepals along the edges. This can be done with a hammer using a forge. Flatten the ends of the workpieces with short blows of the tool, and then apply the leaf texture to the surface of the metal with the sharp side of the hammer. Vikonati is possible from both sides.

If you need to shorten the metal rod, use the grinder. At the middle dovzhin the stem is 40-50 cm long, and the ale is on the right with relish. Then open the blanks of the pellets. Construct them in one of two ways: welded or drilled.

Zvaryuvannya. The electrode is brought to the center of the pellet and the arc is fired. Its thickness is approximately three millimeters, pressed into the metal plate, and pierces through. The value of the flow is set to 100 A. The opening is simply dried, so be especially careful that its diameter does not exceed the size of the stem. So that the welding turns out to be correct and the integrity of the structure is not affected, it is good that the doors will not be perfectly aligned, as long as 50% is enough. To control the process, it is recommended to trim the stem until the yakmog opens more often.
Sverdlinnya. Drill the hole in the center. The size of it is ideally suited to the thickness of the metal rod that is the stem. The rod must enter firmly into the cutting hole, so that the further welding process will take place. If it turns out to be a little smaller, then instruct the opening to drill more holes and join them together, checking the required diameter.

Cutting flowers and pellets

After the pellet has given a characteristic structure, the outline is once again decorated with a marker, and the details begin to be drawn. There is no need to carefully draw it into the line; at later stages of processing, the curvature of the pellets will give them greater realism. It has been confirmed that it is easiest to cut the bud along the contour, and then cut the pellets from the outer side to the center. After this I will turn it over and cut through the other sides. It won’t be very easy at first, there will be little fragments on the gate, but as a result, everything will be lost. It is not important to make a metal trojan with your own hands following the instructions provided in our article. Just remember, the flower looks natural, as you will not try to make all the details symmetrical.

After that, since the petals are virizans, you can move on to the leaves for the stem. They are painted by hand, the fragments of symmetry are not needed here, but can be cut with metal scissors. There is no need to worry that during the cutting process the metal may bend, until everything straightens out and looks as required.

Folding troyandi, nadannya formi

A few centimeters extend from the end of the stem and squeeze it with breams. After trimming the stems, string the petals onto the tip through the opening and weld the skin ball to the front.

They start with a pentafoil, then go a pentafoil, 2 four-leafed leaves one after the other, a trefoil and a propeller. Once all the petals have been picked, a bud of Trojan is already blooming. It becomes impossible to give it more natural shape.

Starting from the center, the pellets are burned through the tube and the edges are pushed out. Next comes the trefoil: the petals are lifted up, and their edges along the edge are pushed up. It’s not good to get hung up on the perfect form, there aren’t two different colors, but rather play around with shape and texture.

Anti-corrosion treatment

In order to permanently preserve the modern appearance of the vehicle, it is necessary to treat it with an anti-corrosion agent. This can be made from farba, special sawing or varnish. However, most often masters use motor oil, this technique is called “blueing”.

To do this, you need to fry the mixture, cover all the containers with motor oil and re-fry so that the oil burns. The fragments will smoke strongly when heated components; it is best to carry out the procedure in an open air or in an area that is well ventilated. As a result, the Trojan will become a burnt liquid and will be protected from corrosion.

Troyanda with thin bristles

If you don’t have a special device, and even if you want to make a treasure trove of metal with your own hands, you can also do without welding. For this you need to take a thin sheet of metal.

To prepare a Troy from thin tin, you will need:

plaque banks;
pasatizhi;
metal knives and basic ones;
drit;
hammer;
twist;
flowers;
ruler;
templates

Vikonanny technique:

The blank jars are cut, unfolded and templates are applied to them. On the blanks, decorate all the details of the flower and stem, after which they are embossed.
Having scoured the center of the parts with a claw and a hammer, open the door.
Along the edges of the leaves, use a knife to cut out the serrations, and twist the veins along the center.
Using pliers, bend the stem and leaves in the middle, forming a hole.
The ends of the little eyes ripple more subtly, having crushed them in the middle with pliers.
For a little while I put together the inner pellets of the Trojan.
The petals of the flower lift up the hill, dispelling the cats.
Cut into slices: 3 pcs. dovzhina 25 cm and 1 pc. 35 cm.
Twist the ends of three short darts into a coil, and light the end of the dart from one side.
Twist all the preparations, closing the stem. The curls at the bottom will flare up, thus forming a stand for the flower.
With a thin dart, the stem is tightly wrapped with silk, not reaching the end of 4-5 cm.
Find the details starting from the star. The end is placed in the middle of the box.
The finished virus is coated with farba from an aerosol can.

As you know, it’s easy to create a Trojan with metal. With the crooked hands of a woman you can make a garnet from a thin sheet of tin. Above all, if you want to gain respect, be careful. Working with guests is not a safe job.

A gift made with one’s own hands will be remembered more strongly and screams of being buried. To whom you invest your time, your efforts and your soul. Kviti garni, ale nedogovichni. The slide, made by hand, is a miraculous gift, which will bring joy to long-term fates and honor the unforgettable enmity of the possessor.

Materials and tools for creating a nasty Trojan

brewing machine (either an automatic machine or an inverter; for an inverter, use electrodes with a thickness of 2 mm at a value of 50-70 A)
Cutting machine or grinder (with cutting and grinding discs; or better yet, a cutting disc with a thickness of 1 mm, and a grinding disc of the pellet type)
drilling with drill bits for metal with a diameter of 0.5 - 1 cm
climbing rod with a diameter of 8-12 mm (for the bottom of the basket)
sheet metal strip 0.5 mm; (you can remove metal from the hood or fender of a car, its thickness according to GOST is 0.5 - 0.8 mm)
gas cap, otherwise it would be high temperature
300 g motor oil (unprepared)
round pliers
felt-tip pen

Make 4 squares from a loose leaf with a side of 10 cm. If you want your trojan to be larger, prepare 5 squares.

Place on the squares the shape of mayday pellets, and on one of them - the likeness of the “trojan of the winds”. When preparing for sepals, do not try to achieve ideal symmetry - nature works on the skin in its own way.

Take a weedy vine and, if necessary, shorten it to the required length - the stem of the vine (40-50 cm).

Now you need to make an opening for the stem of the cut pellet blanks. There are 2 ways - hardening and boiling.

Using a drill, drill a hole strictly in the center, the diameter of the hole should correspond to the diameter of the drill. If the diameters do not match, for example, you have chosen a rod with a diameter of 12 mm, and now you have a drill of 8 mm, then drill 3 open the handle so that you have one opening of the required size. Press the inner edges with pliers or thin pliers. The rod must be firmly inserted into the openings, otherwise it will be difficult to weld.

Use an electrode with a thickness of 3 mm and set the power to approximately 100 A. Bring the electrode to the center of the paddle and ignite the arc. Press the electrode into the metal, bleeding through it. The fragments of vikory thin-sheeted metal will be easily scorched. But be careful, it is not guilty of being too great.

Porada: it’s not difficult to work with perfectly round openings. They need to be made so that the rod sticks to them by at least 50% of its diameter. This is necessary for the proper welding and integrity of the entire structure. During the process of preparing the openings, periodically apply a dowel to them in order to control the process.

Include 2 cm from the end of the line. Now dress the blanks with pellets, starting with sepals. Spread the skin of the ball of pellets so that the pellets are spread crosswise. Secure the skin ball to the sealer. Be careful - thin metal burns quickly, so melt more rods and lower pins.

Move the leaves of the lower ball down.

Now the most important part of the work is the molding of pellets. Heat the flat pellets for now with a gas frying pan. Fry until red hot, do not burn too much, keep the heat on low. As the temperature rises, the metal becomes plastic, it is easier to mold and the likelihood of unnecessary deformations is reduced.

Using thin pliers or pliers, bend the 2 central pellets so that the stench is ignited one into the other. Bend other beads around them.

Ball by ball, bend all the pellets, extending from the ends onto the back side.

Now you need to harvest the Trojan leaves. Draw the outlines on the metal arch. The stench may also be different, however.

Curl the leaves with a grinder.

Make notches on the sides of the leaves, as shown in the photo.

Be careful! Wash the leaves only with pliers, never with your hands!

Change your grip when applying the notch. Trim the sheet by one edge and make notches on the other, then back again.

Bend the leaves with your hands and attach them to the stem of the plant on a welding point. Be careful not to lose them.

Troyanda is ready. If untreated metal will soon be covered with rust, and it will be necessary to avoid corrosion processes. There are no options - sawing, lacquering, you can prepare the trojan in the color of a living flower.

I’m looking for a better way to earn a raven. To do this, you need to fry the pan, cover it with motor oil and fry again so that the excess oil burns. The work must be carried out only in a room that is ventilated, or, more preferably, in an open air, so that when the oil is heated, it will heat up.

Forging technologies make it possible to produce a magnificent variety of objects. Like tools and household items. But there is one more direct way - when the goals of creation are created. With which metal are used to produce various types of metal, decorate and decorate the walls.

Forged Trojan will become a wonderful gift or good training for your skills. How to prepare it, what methods to use and how to discover it – this is described in our material.

If you look for information on the production of a Trojan ball from metal using the forging method, you can find out a variety of techniques and methods. The simplest of them are practically metalworking robots with a minimum of forging. There are also methods when the trojan is prepared from one solid workpiece, which is not based on forging technologies.

So, in what ways is a forged Trojan created?

Folding of several parts

To make a coin in this way, you need at least some metal working skills. Required workpieces: rod 5-6 mm and sheet steel 1-1.5 mm.

The sheets are cut according to the template to make four pellets connected to each other. You need 3 pieces to cut a volumetric cup.

Also from this leaf, a cross is made at the sight of sharp pellets.

With the next step, a rod is taken, the end of which is heated and riveted. After that, proceed to the collection.

Several billets are placed on the end of the rod and welded together.

The leather from the elements is heated and twisted, forming a bag as it goes.

After securing the first pellet, all the others are tied with a rod from the other end.

Once all the pins are installed, tighten the cross, and the pin itself is warmed up and pressed into the required shape with pliers.

When the remaining metal processing is completed, the pot needs to be scorched and cleaned to remove any traces of slag and char. Additionally, you can trim the stem with thorns and create leaves. Guilty of entering virib yak in the photo

But this method, based on the technology, is more of a metal-welding, less of a forge. It is practical not to become a vikorist when it comes to Kowalski’s practices. Prote method is original and simple for the Viconn. Especially for those who do not have a strong possession. How can you earn money for the Kuvans from metal?

Kuvannya

The trojan for this technique uses all the skills of the forge and all the necessary tools.

In essence, the basic technology is similar to that described in the previous section with the addition of basic blacksmith operations.

Required rolled products in the form of a bar of 6 mm and sheet steel of 2-2.5 mm for blanks for the pellets of the next round.

The rod is heated at one end and is tightened to the edge. This can be done by squeezing it into the bream, and using blows from the end to form a thick part.

To manually secure the pellets to the stake of the thickened rod, you can make a furrow with a chisel using heated metal.

Blanks are cut from sheet steel in the form of pellets and ridges in the same way as in the other methods.

The leather from the pellets is first hammered on the edges, discharging the metal. In this case, it is still possible to create veins attached to natural veins.

Before harvesting, you can cut thorns on the stems. To apply the planting to the rod, it is necessary to make reinforcements, which then, having secured the stem in the breams, are formed at the tenon.

Before assembling the card, start preparing the elements.

The skin of the four-piece parts is placed on a rod and welded. In this case, the skin element needs to be twisted to obtain the required shape. Also, after assembly, use pliers to press the required volume into the vibrator and circulate it around.

If it is an eggplant, then the leaves can be attached to the stem. The leather leaf is made using a forging method from a 2 mm steel sheet. From this, a petiole is pulled, which is used to attach the element to the stem.

After completion of operation, the coil is cleaned to remove slag and carbon deposits.

You can also make this type of trimming, like a raven one. To do this, you need to apply a thin ball of unrefined oil to the vibrator and heat it in the oven until the ingredient is coated with varnish before applying.

Behind the bags of such a farrier’s “kvitnitsa” the following result may emerge:

Bath made from solid scrap metal

This is the best farrier's way of making forged irons with your own hands. For what purpose is the production and rolling required: a diameter of less than the planned parameters of the coil.

The blank is heated and stretched to a smaller diameter, thus making the stem smaller. However, from the edge the unoccupied part will be deprived, from which the future bud of Trojan will be formed.

I’ll prepare to squeeze the breams and use the hooks to remove nicks on the cylinders.

After that, pellet parts are prepared from sheet steel again, as in the previous two technologies, which are placed on the stem from the cut end. The molding of the bud is carried out using the same techniques, having secured the element, it warms up and moves through, tearing off the closed bud.

Once all three metal parts are installed on the stem, their pellets are opened with pliers, giving the required shape of the forged trojan.

To better understand the production technology, you can watch this video tutorial:

This video miraculously shows only the Kovalsky technologies for making Trojans.

What can you add to this material with your powerful knowledge of the Kovalsky “kvitnitstvo”? In order to delete your comments, go to the discussion block.

Before Saint 8th Birth, many people are busy visiting shopping centers and online stores to buy beautiful baskets and gifts for their beautiful ladies. With the closest friends of International Women's Day - a friend, a friend, a mother, a grandmother, a sister, a fellow student - are at the reception for a present! And it turns out that for 23 years you yourself have taken away from your wives a set of cologne, scallops and drumsticks - at no cost to the needs of pleasing the fair half of humanity.

It is clear that the gift is very valuable because it was made with one’s own hands. And on the 8th of Birth, a gorgeous gift from the camp - a Trojan forged!

You can see it in detail in the photo, and you can see it even better in the video.

A detailed description of the preparation of a slime trojan with your own hands

Let's take a look at the armchair and the sketches of the Trojan from the metal.

HID ROBOT
Round blanks are cut from the beginning: 3 of the same size, 1 of the smaller size.
Then you need to cut 5 pellets, round the edges and drill a hole exactly in the middle.
With the help of a hammer, the dents are crushed (amazing photo), the texture is created. The leaves are shed in the same way.
Having served as an electrode as a stem (it was beaten with a hammer), metal was welded onto it and spikes were twisted. To attach the pellets, cut into pieces.
The sepals appear in the shape of a new eye and bend.
This is all secured to the stem, and then it fits.
The whole thing is “wrapped” using a vikorist toe and pliers.
The leaves are welded and ground.
At the final stage, you need to clean everything by using a metal brush, and then, as you may believe, you can coat it in your favorite color, varnish it, or create a black spot.

Our forged Trojan is ready! It is necessary to remember that rust will appear on unbroken metal early and late. And the corrosion process must be avoided - this can be done through sawing, varnishing, or coating with porcelain.

In my opinion, I chose the crow. To do this, fry the container, take motor oil and cover the pot with it. Then we fry it again - so burn off the excess oil. All work must be carried out in an area that is well ventilated, preferably in fresh air, leaving the oil to simmer.

You need to fry the cake well (again, not too deep), and you will have a beautiful surface, protected from corrosive processes.