What do you remember with a hose for a zmіshuvacha?

At the final stage of plumbing work, a connection is made to the water supply system, a shower cabin, a wall-mounted toilet bowl and a bidet or other equipment. You can do it for the help of a hard, bellows or flexible lead. The first option is significantly more important than the last two, but it is more laborious, more than that, for this vykonanny not only the presence of a specialized tool is needed, but also the skills of working with it. That's why the bellows is that hose for water supply (for example, hoses for kitchen zmіshuvachіv with a hanging or hanging watering can, the soul is too skinny) for more practical.

It is necessary for us to provide support, that such an option for the introduction of a water supply should be budgetary, but it is entirely necessary, for the understanding of choosing the materials correctly and the provision of technology for connection.

In fact, the gnuchka of water supply is a gum hose (the same as watering), rooms in a tight-fitting weave, wiping with metal threads. Її the main recognition is the defense of mechanical poshkodzhen, both external and internal. The rest can be blamed for a hydraulic shock. Vіdpovіdno up to norms, so spoluchnі hoses are due buti are rozrakhovanі on a vice not less than 10 atm.

Below is the testimony of the butt of the z'ednannya zmіshuvacha type "yalinka" for the kitchen mitt with flexible hoses (A), which is used for supplying cold and hot water.

It is best to respect that the siphon for the sink is connected to the sewerage system in accordance with the gnuchka pipes (B).

vidi

These water hoses are of the following types:

• for connecting a washbasin, a shower cabin and other hot water. To identify them, before braiding, adding a red thread (“A” in Fig. 2);
• for supply from cold water supply pipes. The threads of the blue color are present in the braided one (“B”);
• universal, allow connection to water supply, no matter what type. The braiding of such pipes can be red and blue marked (“C”).

Rice. 2. Hoses for cold and hot water, as well as universal

The cream of this introduction depends on the material of the weave, which depends on the singing characteristics, and itself:

Pipes are trapping, de hoses are being made not from gum, but from rubber, so more likely to be more expensive, and much more expensive.

Like an additional braiding braid, you can bend the silicone ball, like harden the vibrators, which allows you to continue the term of service up to 20 years.

Irrespective of those who are physically out there, it is customary to see this type of water supply as an okremic appearance, through its structural features. The peculiarity of the bellows water supply lies in the fact that the husk is a metal corrugation, mitznoy, and at the same time a bellows, in the middle of the middle there is a humic hose.

Varto also means that the fitting at the same time with the end clamp is connected with the corrugated sleeve to the zvaruvannya, which simply promotes the superiority of the design. The term of operation of this type of virobiv is not less than 25 years, with which the stench can be vicorated for work with a technological medium, we will heat it up to 250 ° C. As a rule, the corrugation is made from stainless steel, and the sanitary ware of the VIP category is used, and brass and mid are used for the purpose.

The price of a new type of water supply, and at the moment, no non-original products have appeared on the market. What is the cost of prices, then there is a lot of money for better hoses.

Connecting the return hoses

Having sorted out from the species, it is possible to look at the typical design of a gnuchka water supply for a deep acquaintance.

Rice. 7. Design of flexible pipes for zmishuvachiv

Virib is composed of the following main elements:

• Reinforcing gaskets, which allow to ensure the tightness of the seal and do not allow “A” to leak.
• Brass or steel nipples "B".
• Gumovoy or rubber hose "C".
• Zahisna weave with aluminum, stainless steel or nylon "D".
• Press sleeves (which zatyskaє nіpel) "E".
• Successful fitting (steel or brass) "F".
• Union nut "G".

P_vodka vygotovlyaetsya z'dnannyam three types: nut-nut, nipple-nut and nipple-nipple. Standard sizes for nuts - 1/2, for fittings - M10. You can also use non-standard connections, for example, an M8 fitting or a 3/8" nut. In such a mood, you need a suitable adapter for a kitchen zmishuvach or otherwise.

The length of flexible hoses can be from 500 to 2000 mm;

Respectfully, the fitting can be short or long. Let's stop it and connect the switch.

How to choose a hose for a zmіshuvacha?

• The presence of the label due to the assigned technical characteristics, to prevent pardons. Be sure that the diameter and type of fastening suit your possession.
• Obov'yazkovo zvnіt vuvagu vagu vrobu, as in the new aluminum braid, the hose will be significantly lighter, lower than that, steel will be stronger (in most cases, such products have that union of sumnіvnoї akostі). As practice shows, the stench comes out of harm's way literally by stretching the wind, and even earlier.
• Sliding into the air, as it is equipped with a plastic fitting, so the fastening is not covered by the need for industrial purposes.
• In that case, if the hose is not enough bending, so there is no trace of it, shards of such a sign tell about the filthy quality. As a rule, through the price on the braided line, there are microcracks, which can cause deformation.
• Give respect to press sleeves, as the material for them is stainless steel. It is important that their pipes were sharply trimmed - this is a sign of yakous pressure.
• Overturning the captive nuts, even if the stench is thin or light, at the cost of a low vibrancy, and with this victoriousness, the severity of problems is great.
• Non-yakіsna huma may have a sharp characteristic smell, having shown such, in vіdmovtesya vіd danії modelі, oskolki such material is more likely to finish dryly.
• Picking up hoses for hot water, do not have mercy on the colorful markings, the stench is due to the red or red-blue thread, do not go with the blue thread.
• Pick up the water supply of a good spring, not bad, so that it sagged or was a stretch.
• Up to a lot of branded attachments (for example, Damixa or Hansgrohe) are included up to a complete set of 50 cm hoses. Schoba Pridni Zmіshuvach in Kitcheni, Turning Tsіlkom to vista, Ale for the pivota of the ONSHODA WHIRANDA MAY MAY MAY Подения подиться вольшельный, 160 cm, the standard rosemist over a bathroom. Usa Vipadku, you can ї сники і и питовить стововати ї ї ї ак обововаша її The rest option is not known in the distance. Tse z tim, that at the lower hose the zayve zadnannya will appear, then, the nadіynіst will decrease.
• What product to choose, import or domestic production, can not be of particular importance, respectfully, that our products, for an hour, are the best and superior to foreign ones.

How to remember the hose on the zmishuvach - cover instructions

It is permissible that before us stand the task of remembering in the kitchen or at the Grohe bathroom, all the necessary plumbing equipment has already been added. Three tools for which you need a gas key (you may need two pieces) and a fum string.

Rozpovidaemo, how to replace the Grohe zmishuvach, to fight for such an algorithm:

1. We interrupt the water supply. If you don’t need to do something, you may need repairs like you have, so you can get it from below.
2. Carefully wind up the old attachment, for which it is necessary to turn the water supply from the kitchen zmishuvach. It is not applicable to any great zusil, so as not to harm the cutting.
3. How to install a zm_shuvach for a sink, fix it on it (for a bath, attach it to a special stand). It is a great respect that the deakers of the brand zmishuvachs on the water supply may put a special nozzle with a mesh, which plays the role of a filter, do not forget to install it, before that, turn the water supply.
4. Wound on a fum stitch, after which the next tighten the water hoses.
5. If you install a switch for a bath or a kitchen one with a watering can, which is pulled in, then you screw on the adapter to the winding and connect it to the new hose, which is included in the kit (for the watering can). Skrіz, de є razblennya, vikoristovuєmo line fum.
6. At the final stage, we turn on the supply of the driver and re-verify the leather hose for the zmishuvach, so nothing happened anywhere. Because everything is safe, it means that the installation can be successfully vvazhat vykonanoy. Otherwise, it is necessary to close the taps for the supply of water and to change the place of connection. It is quite possible that water flows through those that have not installed gum seals on the supply hose (“A” in Fig. 7) or an insufficient ball of fum stitches on the threaded lines. It’s necessary to sort out the day (to get the water supply) and to correct, correct the pardon and close the day.

Likewise, it is necessary to connect to the gnuchkiy fittings of the butt plumbing (primarily or to the budovany type), to the okremim fittings, to the toilet cistern, etc., to fight for the same principle, like a replacement (missing the point, decompressing the old one).