Partitions with drywall: 20 installation secrets

Installation of partitions made of drywall is the simplest way to re-plan an apartment. Together with the editors, Tsey Budinok knows how the apex partition breaks into the low room and how to correctly install the construction with drywall.

Partitions with plasterboard with rose doors

Vikonuemo eskіz future designs, then armchairs from the designations of exact vimіrіv. Scheme of fastening of metal rails can be done by hand.

IMPORTANT! Folding figured partitions are more beautiful to close with the masters.

The thickness of the partition made of gypsum plasterboard is uninterruptedly stale due to the recognition of the design. The minimum thickness of the inter-room partition is 100 mm.

Pokrokove folded to the frame for the installation of drywall and rosette system

You can proceed to sheathing the frame with drywall:

• leaves, cut on the height of the stele, screwed up to the profiles so that the sticks of the leaves fell on the middle of the slats;
• crock fastening can become up to 30 cm;
• the leaves are fixed on the screws with special droplets, slightly drowning the fixing element in the body of the drywall.

After sheathing the other side of the partition, it can be closed with a closed profile.

IMPORTANT! For certain types of partitions, insulation is provided, for the size of the rahunok of some kind of tovshchina varies. Zavdyaki reminds me of the drywall laid between the sheets, the warmth of the noise insulation of the structure is improved.

After the installation of plasterboard sticks with walls and underlays, as well as seams, sealed with summіzhnymi sheets, due to buti covered with putty:

• zapovnyuyut seam;
• impose on the seam a sickle stitch;
• re-cover the stick with plaster.

Fastening of rose doors

Now there are no more opportunistic jobs.

What kind of gypsum plasterboard?

Standards for choosing various types of drywall for the organization of frame and frameless structures. For partitions in the kitchen or in the bathrooms, it is better to use water-resistant drywall (GKLV) curtains with a diameter of 12.5 mm. For the construction of walls in the community, take a fireproof drywall (GKLO).

Photo 1 - Plasterboard partition wall for a working space in front of a private room in an interior overlooking Orbit Homes

Profile for partitions made of drywall

1. Direct profile to serve as the basis, on which the st_ykovy profile is attached. Yogo vikoristovuyut, if it is necessary to organize a wall frame or a frame for interroom partitions.
2. The profile of the st_ykovy vicorist is for the preparation of the frame of the walls and the inter-room partitions. It is fixed in a straight line, which is fixed along the perimeter of the working area (in this case, along the perimeter of the walls).

CW 50 (stіykovy, stіnovy) is used for the organization of vertical stіyok of metal frames, used for cladding and partitions from gypsum plasterboard sheets. The rail is mounted only in pairs with a straight profile of a wide range. For the choice of CW 50, the main criteria are the width and height of the partition. fasten up to CW-50 for additional dowels.

CW-100 is one of the main elements in the installation of metal stud structures. Yogo vikoristovuyut in a pair with a direct UW of similar roses.

Design of partitions from drywall

1. It is possible to install inter-room partitions after re-planning the premises, dividing the hall and cold.
2. A partition near the room for saving speeches can be divided into zones (a zone for saving bedding, winter carpets and towels, speeches for a seasonal wardrobe);
3. Installation of structures in the kitchen will help you to store an important refrigerator or organize a mini-comor in a coop.
4. Partitions in a child can be designed with niches for books.

Photo 6 - Partition with plasterboard between the kitchen and the living room in the interior Photo 8 - Another good example under the open space behind the additional gypsum partition from HA Architecture
Photo 9