Do-it-yourself repair of wooden logs: see the repair work and recommendations of fahivtsiv

The old derev'yane pokrittya pіdloga in a private booth often recommend fakhіvtsі to re-replace it with more modern materials. Zvichayno, the stench vіdіznyayutsya mіtsnіstyu, nadіynіstyu and dovgovіchnіstyu - it's unlikely that you'll be in conflict with them. But only wooden paddles are especially ecological, warm the house and give you a calm - wait, so it’s nice to walk barefoot with wooden paddles.

It is a pity that the old (wtіm, like and in the new) budinkas of the derev'yanі pіdlogi have to be repaired periodically. І tsey process as a whole can be done with your own hands - it’s very clear to follow the recommendations of fakhivtsiv.

What you need to know about the "diagnostics" of wood

The whole process of repairing wooden logs with your own hands is based on diagnostics. It is necessary to bring out boards that are rotten / rotten, to bring out the creak, irzhu on flowers, how many boards are in the places of their zadnannya. The most repair robots lie at the offensive:

• liquidation of the bending of wooden planks;
• renewal lag;
• usunennya creaks;
• replacement of boards and song fragments in wooden plinths.

Such a previous “diagnostics” will help you correctly assess your strengths and technical abilities, prepare all the necessary tools and materials.

Give respect:as in the process of "diagnosing" the wooden logs, the volume of the logs was revealed, then you should seriously think about completely replacing the logs.

Simple do-it-yourself wooden pidlog repair

The simplest way is to independently repair wooden pidlogs, as it is not necessary to carry out a new replacement of pokrittya for pidlogs. І creaking floorboards, і rotten fragments, “failures” can be easily swallowed up without being caught fakhіvtsіv, which is called “little fight”. One hour with these robots it is possible to remake the serene look of the whole place, for which it is only necessary to replace the decorative covering of the wooden bridges.

Like a wooden pidloga creaking, it means that it’s not enough to fit the floorboards one to one. To usunennya creaking mostin can be crushed on the foot:

1. Resolutely enclose the pіdlogovo pokrittya and reveal the mіstsya, in such bridges the wooden pіdlogi are one kind of one on the great vіdstanі, the gaps between them have been tucked away.
2. It is necessary to clear the wood from the wood and the saw, and then drive a wooden wedge into them, planing it in front and shaping it with joiner's glue. After that, as a wedge will be on the job, it will be necessary to carry out grinding operations.
3. Even though the gap is small, then it is quite quick to use self-tapping screws and a screwdriver - it’s enough to beat / fasten two halves with self-tapping screws, so that there is a charge.
4. In times of presence, whether there are any white chinks, but the presence of a creak, it is necessary to speed up with talcum powder - it is thrown through the logs. It’s necessary to stitch, so that the speech has squandered in the slits between the floorboards - it covers the day, the creak, it’s better for everything, znikne.

Often trapleyaetsya so that walking on a wooden paddle guesses a walk along the pull, which is swaying, but to the ship - it seems that the bridges are “playing”. Don't pick it up through the whole pidlog! Fakhіvtsі stverdzhuyut, scho and in such a time to make the mіtsnіst of wooden pіdlogi with their own hands is not so easy. For whom is it necessary to vikonati such a diї:

• designate the place of misfortune and clearly identify those bridges, as they hit and threaten to roam under the feet of the meshchants;
• vipility of broken boards, having cut two crosswise and two later ones, cut them with a hand electric saw;
• up to the bare lags, install small bars - the stench plays the role of an additional stop for new planks;
• for a new board, it is necessary to take out the lower fold - it is necessary to use a planer or a small rake, a sharp knife;
• install new boards at the preparation of the month;
• fasten again the installation of the material to the obvious with self-tapping screws or flowers.

Give respect:and flowers, and self-tapping screws are drowned in a tree at least 3 mm - it’s not only to ensure the high quality of the work, but also to significantly improve the level of fixation of the bridge between itself, which will prevent the appearance of a creak.

Features of simple repair

Fahіvtsі recommend before him, how to proceed to the description of the work, to get rid of the decorative cover - farba can be taken for help of a wake-up hair dryer or a blowtorch. To solve two problems at once:

• dopomozhe more accurately designate the poorest wooden litter;
• to allow to change the ovnіshnіy look pіdlogovogo pokrittya.

Give respect: if you pick up new boards to replace the old ones, try to pick up the little ones of the village, identical to the obvious one on the grounds. Such a pidkhid can be covered with varnish, and the solution to the interior design.

If we had to replace the decorative coating of the wooden underlays, then before applying the varto varnish, carry out a cycling - external cleaning of the surface for the help of a special possession.

Do-it-yourself overhaul of wooden pidlogs

As soon as the hour of the “diagnostics” of the wooden flooring was carried out, great losses were revealed, then it would not be possible to carry out private repairs. It is necessary to prepare for a major replacement and lag, and bridges.

Preparation of the robot

First of all, a capital replacement of the wooden pidlog, it is necessary to carry out the preparation of the work. Moreover, it will be necessary to put it up to it in a povіdalno way - in addition, as soon as possible, the preparation of the cover will be done, to lay down the final result of the entire repair. At the understanding of the preparatory workers during the overhaul of wooden logs with their own hands, enter the following:

• we know the plinth along the entire perimeter of the premises. It is necessary to take it carefully, without vibrating the flowers “with meat” - in such a rite, it is safe to spend the minimum on replacing fragments in wooden pidlogs;

• we clean the boards like olive farbi (yakshcho є) until a clean village appears;
• the skin plate is numbered - for the future, after the work is completed, so it will be easier to install it on the plate;

Give respect:when the boards are removed, a detailed examination of the skin is carried out from them to see if there is evidence of rot, rottenness, and damage. If necessary, the dowels are replaced with new ones, but it is necessary to number them once again.

Give respect:it is necessary to buy new lags of such rosemaries themselves, as they were zastosovulysya for the support of the primary variant.

Do-it-yourself basic work for the repair of wooden pidlog

After such a retal preparation, it is no longer possible to finish the instruction below, in order to complete the pink work. It is important to follow the steps of the process:

1. We install insulation. As an insulating material, you can vicorate polystyrene, expanded clay, but it is more practical and economically viable to stosuvannya like insulating mineral wool, squeak or stone wool. It’s easy to fight - a kind of insulation is released from the mats, like a vіdmіnno they are installed in the space between the lags.

1. . It is necessary to lay a vapor barrier material on the inside of the insulation mother - it is released in rolls and handle it manually. Remember only one thing - the vapor barrier material is laid by the "overlap" method by 20 cm, and fixed with foil tape.

Give respect:found/cheapest material for vapor barrier - polyethylene plyvka. But you can win for such robots and expensive options - for example, penofol.

1. We take cover from boards. Those bridges, which were taken for the first hour of the preparation work and numbered, fit into their place. Be more respectful during the work done - a pardon can bring to the point of need to start the lining of the underlay with boards anew.
2. Fixation of boards. Putting the boards on the bed is necessary to creak among yourself. Fakhіvtsі recommend robiti not with flowers, but with screws - the stink of the safety of the extra fastening. Screw the “drops” of the screws directly into the wood, pluck them by 5 mm.
3. Rechecking the rivna. According to the completion of the descriptions of the work, the horizontal plane of the wooden plinth is determined. As if the boards protrude above the deep ravine, the whole nedolіk is taken up by a planer.
4. . It is necessary for the removal of an absolutely even surface - according to the daily standards, a difference of no more than 2 mm per 1 square meter of coverage is allowed.

Give respect:cyclical robots affect the visibility even if only a small amount of work is carried out with special tools. Therefore, it is docily to request for the development of the first stage of professionals, even though all the work independently is real.

It was no longer enough to clean up all the pieces from the wooden pidlog, vicorist for the pilosos or a shield with a ganchirka. And now you can cover with decorative material ready wooden pidlogs. Just don’t forget that before this it’s necessary to clean the tree from vіd volog, ultraviolet, shkidlivih coma - you can work for additional special designs, and if you transfer to put on the farba, then it’s easier to work the surface with a wonderful drying oil.