Do-it-yourself installation of zlivu z dahu

⁰

After the laying of the covering material, the next step was to introduce a wooden water, as it might damage the foundation of the house. With an effective zahist in the form of negative naslіdkіv vplyu opadіv є doshovі pour out for dahu. About those who stink buvayut and how to correctly vikonate the installation of zlivu from the finished dahu with your own hands, you know, having become familiar with the material of the article.

Two materials are used for the preparation of wood grains: plastic and metal. Elements of ominous systems made of metal are coated with anti-corrosion coatings. Zastosovuetsya:

zinc coating;
plastic;
opovilnennya;
covered with a zinc-titanium ball.

Metal systems are characterized by high soundness, but at the same time, the stench is noisy and important (due to the accumulation of stronger reinforcements). Installation

Porada: in times of blockage of metal systems, it is not recommended to replace the sealing elements with sealing for additional silicone. Year by year, silicone collapses under the influx of outrageous factors.

Plastic systems are not recommended to wink at different snow pressures. The stench melts screaming for sub-zero temperatures. The most recommended are the wicking systems of steel with polymer coatings: the stench is aesthetically pleasing to corrosion. Ale, with whom, it is important to correctly vikonati montage zlivu z dahu.

Zlivna Dahu system: designing and rozrahunok

The design of the rainy system is consummated at once from the design of the covering of the booth. Whom dotrimuyutsya such rules.

It is necessary to designate the location of the installed virus. Expand the edge of the system from the side of the lowering of the level. At the time of the large area of the dozhina of the roofing structure, it is necessary to install intermediate windings on a distance of up to 24 m, one per one.
If it is not possible to install the intermediate virus, it will be possible to cut down the complaints.
Fallow in the area and configuration of the cover, choose the diameter of the drains: 80, 100 or 125 mm. The quantity of fall off in the region is also protected.
In order to ensure efficient water drainage, the installation of the system is carried out with a re-roofing: for 1 m² of cover - 1.5 cm² of the gutter cut.
It is not recommended to install the system for zlivu dahu from important metals (from midi) in case of light frame houses.

Technology for the installation of the storm water system

In order for the workers to cope with the pressures and efficiently bring in the water and the water, the installation works follow the strict rules.

The gutter of the system is restored so that the edge of the covering material hangs over the yogic axis line.
The grievance is the fault of the mother who stole from the bik virvi.
Fastening brackets are fixed behind additional screws.

Ways of fixing brackets

On the basis of the covering (before laying the covering material). The best option for metal systems.
Until bloody nig. Tse zruchnіshe zrobiti before installation pokrіvelny material. Recommended for light plastic systems.
End plate installation. Vykoristuetsya exclusively with plastic chutes and brackets, suitable for installation in a vertical position. May zastosovuvatisya in low-snow areas.
Fastening up to the wall of the booth: it is possible with small swipes of the covering material.

The two remaining options can be developed after the completion of the installation of the roofing system and the roofing pie.

Installation of plastic fittings for Dahu

For work, it is necessary for mothers to have their own set of offensive tools, attachments and materials:

blow that goon;
angry virvi;
muftis for bringing in the elements;
silicone sealant;
glue for plastic;
amplifying;
plugs;
brackets;
electric drill or perforator (deposit using the method of fixing brackets);
screwdriver;
hacksaw for metal;
self-tapping screws (for fixing brackets);
clamps for fastening pipes and funnels.

Zlivi for dahu plastics are installed for the next few rules.

Before the cob of work, a number of necessary materials are indicated.
Brackets are to be fixed: trims are installed on a 0.5 m height, one per one. Bracket is guilty mother uhil. For this type of upper point to the lower point, pull the cord, at which point the details of the zlivu system are directly oriented.
The runners are joined with an overlap of at least 25 mm. Such a self is guilty of being covered between the edge of the covering ridge and the outer side of the gutter.
The gutter is fastened to the bracket, sealing the place of the elements behind the additional sealant. If necessary, plastic is cut with a hacksaw for metal.
Attach a dropper to the top: it is necessary for the removal of a vologist from the bottom of the cover pie.
If the trough system can be turned - the kutovі elements are installed. The upper and lower edges of the system are surrounded by dead-end plugs (as the installation of the virvs has not been transferred). Fixation zdijsnyuetsya for additional glue.
Trumpet that virvi to screech for help collars.
The lower edge of the pipe is responsible for bringing water into the foundation - at the drainage system.

Important: under the hour of the installation of pipes, that virv is not responsible for trimming the glue. Fixation is achieved by a wide input of parts, so that the parts are one in one.

How to keep an eye on the drainage system

In order for the rain to melt the water without interruption in the morning, it is recommended to drink it.

Drain pipes and whirlpools can smear the leaves, as a result, water accumulates in the grooves. Freezing, you can screw up the system. In order to get away, the zholobi periodically look around and clean it from the sight of that leaf.
At the zholobi, special nets are laid on top of the virv: the stench is not allowed to enter the system.
It is recommended to lay heating cables: it will ensure efficient robotic drainage systems during the rainy season.
In order for the snow to not break off the brackets and the zholoby at once, the snow-tight trims are installed on the covers.

At the end of the article - montage of evils on the dash: a video that demonstrates the process in full from the comments of the fahivtsya.