Gnuchka inlet for zmishuvach: how to choose + install bellows inlet for water

For connection of water-heating equipment, toilet bowl, replacement and other plumbing outbuildings, as well as connecting them with water supply. This element can be a mother of a gnuchka or a zhorstka design.

Most of the koristuvachs give priority to the first option. It is not without reason to fight such a choice: the water supply for the zmishuvach is compact, practical and easy to install.

On the vіdmіnu vіd zhorstskih outbuildings, pіdvodka, equipped with ruhomoyu construction, can be easily installed in important places with an open space.

The main advantages of virobiv

In the process of laborious installation, steel pipes are bent and creaked with clamps, after which a bulky metal spore is established. Installation of a flexible virobu is much simpler, moreover, the high quality and reliability of the entire system is left on high.

Attached with a flexible hose with a length of 0.3 to 5 meters. On the ends of both sides, there are fastening details with humic rings of chinks.

Gnuchka pіdvodka is often vicorated at designer interior solutions. When connected to zmіshuvachіv, sho vbudovuvaetsya, її prihovuyut in a creamy block, scho roztashovuєtsya in the middle of the wall.

Sound in the house of vibrators of zmishuvachiv complete the possession of the same type of z'ednuvachiv, which is truly given to a great number of advantages:

• handy and safe operation;
• hermetically sealed construction, made from high quality materials;
• simple for an unfinished coristuvach the process of installation / dismantling, which does not require the presence of specific knowledge, a beginner and professional possession;
• resistance to vibrations, the last of hydraulic shocks that periodically trap at the pipeline;
• a three-year period of service for the completion of the right minds of exploitation;
• conservation of normal use over a wide range of temperatures.

If necessary, water supply, to bend, freely move around and change other plumbing fixtures, which cannot be said about their counterparts.

How to handle such manipulations carefully, you can not be afraid of vipadkovy poshkodzhen design.

Nadіyna produktsіya s vіdpovіdnimi sertificаtіvі and duly branding are sold in specialized stores. All the parameters are reported to the accompanying passport. Statements term of service is not guilty but less than 5 years

It is obvious that the listed pluses are less likely to be prepared as well. To get a hose with good technical characteristics, to ensure respect for the products of the best brands.

For example, Tucai, Mateu, Uni-Fitt. These manufacturers give a guarantee for their products and may be sanitary allowed for contact with drinking water. Among the most popular virobniks are the companies Monolit, Flexiline, Aquatekhnika.

Negative sides of attachment

Elastic hoses, although in the best way to supply water, do not suffer shortfalls.

Based on the results of the analysis of feedback from supporters, taken from thematic forums and social measures, the following negative nuances were seen:

• to be afraid of supra-world twisting, tightness, bending, like provoking irreversible deformation of the structure and the term of service is very fast;
• if instructed from the front of the installation to be exposed to fire, the installation of a flexible hose is blocked;
• at one-hour supply of water to the kіlka prismіschen in the tubes of bellows vibrate vibrations, which vibrate a characteristic rumble.

The metal elements present in the outbuildings are oxidized by the year, which leads to corrosive processes.

When buying a product, it is necessary to specify, for the connection of which plumbing equipment will be won. Vіd tsogo to deposit a way to come. Sales consultant

It is also worth vrahuvati, that okremі vidi gnuchkoi podvodki sensitive to critical temperatures. Too hot water with a temperature close to boiling can cause damage, provoking an unreliable flooding.

Reinforced braided hoses

The first type of supply is a soft hose with high elastic power, reinforcement to special braids.

The ends of the tubes are equipped with fittings, for the help of such a design, they can be fastened to a zmishuvach: from one side of the fitting, from the other side - a cap nut with the same diameter of the outer thread. Reinforced outbuildings are refurbished at an affordable price, which is the most popular among buyers.

Regardless of the simple manufacturing technology, the structure of the hoses is foldable. The base is made up of gum, rubber or cross-linked cross-linked polyethylene (PEX).

Fahіvtsі stverdzhuyut, scho in systems, which have zdіysnyuєtsya supply of drinking water, zastosuvannya gum water nebazhan. By all means, the wool is covered with ash thread. For the preparation of braiding vicorist various materials.

The widest type of winding for reinforced hose is stainless steel. Їy characteristic optimal working parameters of the average level: pristry vіdmіnno funktіonuє in the range of 10 atm. a vice and +95 degrees of temperature is the right place to pass through it. Attachments made of stainless steel stably work up to 10 years.

Galvanizing drіt is a budget option, as in terms of prices, and technical characteristics. Watering from this material may harn gnuchkіst, but the stench is not enough mіtsnі and shvidko go out of tune

The strongest indicators are nylon. The introduction of nylon weaves is as functional as possible: the stench of the building can be up to +110 degrees and the temperature is up to 20 atm. vise. The term їхної service significantly shifts its analogues and sounds no less than 15 years.

Braiding with aluminum is used only for these systems, where the water temperature does not exceed 80 degrees, and the working vice - no more than 5 atm.

Such a material is weak to the point of corrosion, so it is better to vicorize it in applications with a low water content. Flexible hoses, reinforced with aluminum braids, do not change for about 5 years.

Bellows tubes for water

Another type of introduction of performances is bellows hoses. Dovgovіchnіst і nadіynіst tsikh models nagagato vyscha for the reinforcement of the slabs. The outbuildings are seen as an extraordinary construction, which gives them a miraculous flexibility.

It is folded from stainless steel, folded into rings, which are drawn to a different diameter. At the cob stages of the harvesting, I prepare for the hose, vibrating it, taking away the corrugated shape from the result.

The bellows for supplying the water can be foldable or the mati is fixed. The first option is stretched at the borders of the range set by the picker: in 200 to 355 mm, in 140 to 250 mm thin.

At occasions with folding hoses, it is necessary to protect them, so as the over-the-world expansion will shorten the period of operation. The introduction of a fixed income does not apply to the expansion. Її let out at a specifically designated size: from 20 to 80 cm (with a crop of 10 cm).

Pristosuvannya show high stability to low and high temperature parameters. Good stench works in the range of temperatures -50 to +250 degrees. The term of service of bellows tubes reaches 25 years.

The bellows hoses are connected by a hot spot - noise when supplying water is up to a few times. The problem is relevant, if, for example, water is supplied to the boiler, the toilet bowl is flushed at once.

Conducted criteria for choosing a virobu

Get a water supply for a slut, how to follow all the parameters, how to serve more than one river without problems, to add a few simple recommendations.

Before a direct purchase, please seek out an expert:

1. Reconsider the actual parameters of the operating temperature and the type of plumbing to the technical characteristics of the water supply, indicated on the etiquette in the manufacturer's instructions.
2. Protect future minds of exploitation at the choice of braiding material. For watery applications with a rotten ventilation system, there is no trace of bathing with metal braids. Condensate, which settles on the surface, quickly leads to corrosion and adhesion.
3. Assess your viroba. It is great flexibility that light hoses are made of aluminum and low-grade metals, which are easily destroyed in the process of exploitation.
4. Perekonatisya at the presence of sharp chemical smells. The stench is about the stagnation in the environment, which is unsafe for healthy technical gumi.
5. Protest the increase in elasticity. Insufficient bellies, “oak” tubes crackle and burst in a short hour after installation.

One of the main components of the hose is fittings. It is necessary to carefully look around. It is important that the stench was well pressed and did not have visible defects.

The parameters of the pressure in the centralized water pipes should be close to 4 atm. For safety reasons, it is necessary to select hoses with a margin of 20-25%.

Optimum materials for nuts are nickel-plated brass, stainless steel. Aluminum for supplying water is categorically not suitable. Also, do not take the water supply with hard plastic fittings.

When choosing an add-on, the type of connection to the water supply and zmishuvach, the type / size of the threaded connection, and the length of the sleeve are orientated.

Rіzblennya that, it is possible vnutr_shnyo chi zvn_shnyoї razmirom vіd 0.5 to 1.5 inches. This parameter depends on the openings in the pipes and fittings, to which the hose is connected.

For a mitt, a shower cabin, and a sink, it is better to look at a ledge with a diameter of at least 10 mm. Necessary dozhina vyznayatsya, vykhodyachi z vіdstanі mіzh sanitary fittings and vіdvedennyam pipes.

It is important that it is ideal, because if the connection to the hose does not create an overhead voltage and do not settle the additional vagina.

Reinforcement and bellows battens from cheap components and low-grade syrovina are seriously exchanged for terms of operation

Instructions on how to connect the water supply

To get for the installation of a gnuchkovy introduction of fahivtsiv is not obov'yazkovo. You can go through this clumsy process with powerful forces, having spent the healing of infirmity.

The installation of the hose is carried out not only for new ones, but also for zmishuvachiv, which are already vikoristovuyutsya. I will build a replacement on the edge necessary in two ways:

1. The opening was strongly deformed or shattered.
2. There were leaks in the area of ​​\u200b\u200bz'ednannya zі zmіshuvachem that pipeline vnaslidok znoshuvannya or poshkodzhennya gasket and cap nut.

The order of installation work when connecting a bellows and a reinforced installation is identical. It is necessary for us to reconsider, so that the integrity of the bend and the reinforcement of the armature are not damaged during the transportation and saving.

Let's follow the next western entrances, again turning the hot and cold water valves in the water supply system. To lower the motherland, which is lost, it is necessary to open a crane.

For installation / dismantling, a nut wrench or a wrench will be required, which is used to select the diameter of the union nut. For the help of the key, a part of the old hose is connected to the water supply. From the first, water can flow, so it’s better to set up containers for it.

As if the hardships are blamed for the hardships, more for everything, the day has rusted. It is poured, which is settled, it is easily absorbed by the way of processing the surface of the retailer or by the technical oil aerosol WD-40

Pulling the hose out of the water pipe, it is necessary to remove the zmіshuvach, loosening the nuts to fix it. Dali, vikoristovuyuchi the same key, followed by the inclusion of the introduction of the zmishuvach.

A new addition comes to the reverse order. On the back, the nut is baited by hand, then we pull it up with a wrench.

Even if the roses of the hose and the zmіshuvacha do not stick, you can twist the additional adapters. The tightness of such covers is ensured by a linen thread or a FUM-string.

Installing virib, varto dotrimuvatisya kіlkoh rules:

• straighten the hose before installation, avoiding bending;
• fasten the little pipe until the sound of that zmishuvach is seen, without reporting the overworld zusil;
• to fix the fastening so that before the month of installation it was easy to pick up with the method of preventive inspection (recommended periodicity of rechecking - once every 6-12 months);
• pair parts with similar materials to prevent the development of electrochemical corrosion, also a brass + copper option.

The final stage of installation includes the binding test of the connected structure. To check the tightness and capacity of the hose, a water supply is connected, after which the functionality of the attachment is assessed by a stretch.

The sleeve of the bellows hose is made to fit with a light stretch. The radius of the wig can change the original diameter no more than the lower one five times

Having seen the drops in the places, which are picked up, it is necessary to tighten the nuts again with a wrench. If everything is fine, then the hose is ready for full operation.

Whether it’s a supply, a connection to a water supply system, you’re constantly under pressure. Through this process, the possibility is saved that the tube can crack without vibrating the voltage in the system.

Sob did not have a chance to correct the serious floods, to turn the taps of the water supply, blocking the houses for three hours.

Visnovki ta korisne video on the topic

How to choose the correct water supply:

Report about the installation of flexible hoses for the zmishuvach:

A look at several models of attachments and analysis of factors that add to the trivality of the term of the service of viruses:

Handy and practical gnuchki outbuildings starkly shoot their competitors from looking hard metal pipes in the background. The stench is easily installed, quickly replaced, and does not require special attention.

However, it is not possible to save money on such a ploy: the chances of doubtfulness can cause financial troubles.