Subscribe and read
naytsіkavishі
statti first!

How to choose the right boiler


Moreover, it will be easy to choose an indirect heating boiler, most sellers will not know what it is. We pragnemo add the scorching of a private cottage to hot water supplies, and we don’t want to take a double-circuit boiler, but we want it, and we don’t care, while the tank is heated on the mitt, the batteries will stand idle. In the middle of the indirect heating boiler there is a coil, which circulates heat. You can also use distilled water from the singed needles, or else from the boiler circuit. The advantage of an indirect heating boiler is that we don’t need to build a double-circuit firebox, having a simple wood-burning stove, as it is supplemented with a circulation pump that pumps the radiators into the booth. How to correctly choose an indirect heating boiler, regardless of all the barriers, how should we put sellers and authors of non-written articles on us (stay hot)? Vіdpovіmo on qі and іnshі nutrition.

How to use indirect heating boilers

Where do you get this wonderful indirect heating boiler? Not so simple. Real, which produces water heaters with aluminum tanks, is still not ready for indirect heating boilers, but on Yandex Market it’s still not known which tank can be the most popular in rocket production (crym titanium) metal. Otherwise, it seems, choose the material we happen to have more than one speech. I steel. Then she has two vidi:


  1. The leguvannya nada became the undivided power. Supplemented with chrome, it becomes stainless steel. For the firmness of dealers, yak stovhayut us enamel, ts tanks may be cheaper. But really, it's not like that. Virobiv virobiv z stainless steel vapadok tim, scho tanks serve longer. And if you hit the ball, which is passive, then such a boiler will outlive its masters. It is hard to believe, but we are less likely to convey the words of technical fahivtsiv.

  2. Enamel is different. With inclusions of titanium, biostekloporcelyan, nanosrіblo - all of them are different coatings, yakі are applied in a bowl of balls, often at high temperatures and are sealed for nadannya mіtsnostі. We are addicts of what I’ll be right for the next time, when the hour is already piece by piece, apply the smelt to the aluminum oxide crystal. But the process of anodizing, melodiously, is expensive, so you can’t get stuck at times of already expensive boilers. Nanosribly looks cute, to the one that drives in bacteria, and titanium is a hypoallergenic additive (applying teasing to the body). We are told not to be afraid of the mud, but the axis should be cleaned with rollers, if the time for service has come. Like at the aquarium!
  3. (div. also: )

Zagalom and not a lot of ceramic coatings in the fact that stench is easy to crumble. To finish the troch, hit the tank with a ring, so that the ball will start to vibrate. A lot of manufacturers of water heaters secure their brands with bypass valves, which also work as a check valve. An arrow is indicated on the body, and no hydraulic shock is not a terrible blow, which is established for all the rules. An indirect heating boiler is a more expensive purchase. Try to know the brewer, who summarily completes his brew. The most expensive food, the fact that the technical equipment is more expensive.


At the same time, it is difficult to know the complete set on the sites. We aim an example:



  • Bosch indirect heating boilers from the SO series are cost effective. The stench may be enameled and covered for operation at a pressure of up to 10 bar. But the bypass valve is not included in the kit. And tse means that you happen to buy an okremo zapobіzhnik for 8 bars. Also in the instructions there is a miracle table, where instructions are given on how to choose a hydraulic accumulator. Tobto yogo tezh happen to get okremo. It is especially worthwhile to hang out in private booths, as they run wet pressure pumps on cold water, as they work for sensors in the vice in the system. The hydraulic accumulator should be protected from the mittiev impacts when starting the pumping, prote on an emergency bypass valve bypass for 8 atmospheres is also required. The scheme for connecting an indirect heating boiler is also shown in the instructions.

Cream of that! The sensor is included in the kit, it's great. How we fought, but we couldn’t figure out what the opening of the electric TEN was. If there is no scorching, mitis with warm water, find a model so that you can come and wake up the spiral. In addition, pay attention to the fact that Bosch releases models that are approved for work in pairs with sleepy collectors. Є specific annexes, yakі do not recognize the other energy of the sonyakny krim, that hybrid, in which there are two snakes, one of which can be eaten from a gas boiler. Choose the right choice of the boiler, because the geometry of the heaters is covered by a specific heat sink. And why is it important? To be honest, then, the temperature of the heat carrier is not visible. It is not excluded that one should try to parallelize both snakes and put them on the scorching circuit. Go ahead, but only after ordering a good diet on the forum, but for yourself:


  • What can you do?

Is the sun a boiler like a dzherelo energy?

What type of boilers is better to choose? As a sleepy collector, factory, and not self-reliant, then, insanely, it is necessary to take it from the WST series. We were amazed by the parameters: the table shows a heat transfer temperature of 160 ºС. The stars are taken out in the sleepy collector, - the food is ten - richly cіkavіshe, є teplonosієm. Water? The intensity of the two coils is hostile, which goes off scale for 70 kW. It was understood that hot water would be ready for the treatment of illnesses, the proteo is not the skin of the sleepy collector, and two thirds of the work falls on the same, as the left part of the working volume of the tank. On the right, in the fact that the additional boiler serpentine is rotting the beast, and it only heats up the top of the tank. Tse is not much better, which is more important. Such a good boiler to the wind, if the sun shines. We just warm water miraculously.

Typical characteristics of indirect heating boilers

With a better diet, which is better, trim the course for Bosch, Ariston and Electrolux. Є th cheap brandy, not the fact that the stench is higher.



The selection of the boiler is also carried out according to a number of typical parameters. Tse єmnіst nasampered. For one wake, at least 30 liters of water are spent in the soul. For the whole hour, a hefty boiler is ready. Look at the characteristics:


  • How to take the robotic mode. Tse temperature is the speed of circulation of heat.

  • For a long time and up to a certain temperature, water is heated in the normal operating mode.

  • What is the maximum amount of water allowed, how many liters can be used:

    1. Butt: tank capacity 250. Zliv with maximum fluidity allows you to take close to 450 liters. Tobto, the docks tank is emptying, new water is being prepared. For rahunok tsgogo i go out the transfer of the maximum otrimuvannoy lіtrazhu over the actual capacity of the tank.
    2. (div. also: )

  • Reverse the totality of technical characteristics to the contour of the serpentine with its own possessions. Tse nasampered the temperature of the heat transfer, then, as a friend, I call swidkist yogo ruhu. We already talked about it more.

  • Take a look at the options:

    1. Robot snakes at once and one by one.

    2. Tena connection.


The material covered is also important, but no other evidence has been found, as it is the best of them. In Russia, the hour of cherishing food, which boiler is better to choose, the buyer knows the priority of stainless steel.

The choice of materials is allowed only for the obviousness of the indexed posting on the side with the material.

Join the discussion
Read also
tree repair'яної підлоги своїми руками
How to replace water supply to zmishuvach
Usunennya breakdowns of the switch to the shower at the zmishuvach at the bathrooms