Yak zrobiti water scorched a private booth
One of the main indications of the ordering of the life is the organization of scorching. Therefore, for the purpose of executing, as if scorching at a frequent booth, you should always remember the scorching schemes. Tse allow quickly, even with smaller vitrates to create an effective scorching system.
The principle of robotic water scorching of a private booth
The essence of the work of the opaluval system, in the form of a heat carrier, is water, which is heated in the heating room and moved to the fixtures, which transfer the heat to the application. The transfer of thermal energy can be carried out for additional radiators, convectors or power supply. The water heated up to the singing temperature, moving by them, turns into the heater in a cooled look. In each building, the heat-carrying unit is heated and the cycle is repeated.
Until the singing hour, the heat-carrying rush was in full compliance with the laws of physics. During the current system of scorching, vicorous pumps are installed to create water circulation. Such a technical solution led to an increase in the KKD of the scorching unit and increased the economics of this work for the change in the heat exchange rate.
For a double-topped booth, it has its own peculiarities
Heat generators, which are produced by modern virobniks, are high-tech units. They characterize high productivity and economy. The complex of the opalizing system includes a pump that ensures the safety of the water, a tank, which is necessary for the removal of a part of the heated interior, that automation, which is responsible for the safe operation and comfortable operation of the possession.
Basic elements of the opal system
For heating the heat transfer, a boiler is used, the type of which determines the design features of the entire scorching system in a booth. Heating outbuildings with natural draft are installed in specially equipped premises - boiler houses, as for normal work it is necessary to create a dimar.
The boiler house is equipped with a primus draft, it can be installed there, where it is handy.
It is necessary to apply for additional coaxial inputs, as if they are equipped with electric fans. Boilers are very popular, which not only provide installation for sub-logs, but also the possibility of mounting on the wall.
Installation of radiators or convectors transferring the accommodation under the windows. Tse pov'yazano z tim, scho itself in tsikh mіstsyah can wind heat. The heating element in some systems can be the heat of the sublog.
Scorching scheme Depending on the type and type of scorching fittings and thermal attachments, as well as the location of their installation, pipes are being piped. In order to create the necessary microclimate in the application of the booth and the efficient robotic system of scorching, it is necessary to carefully plan and develop all the nuances of the design and elements for the skin application.
Opalium system from natural circulation
Searing the booth Conducted scorching at a private booth during the hour of natural circulation transferring heat transfer behind the system is consistent with the laws of physics. The movement of water becomes possible due to the difference in widths and temperatures, which is why it is also necessary to adopt the design features of the mutual station of the system elements.
A riser goes out of the heat generator, which ensures the supply of heat in the hot station to the collector. After that, the vins move to the radiators, collapsing like that, transferring heat to the premises.
Then the cold heat-carrying fluid from the used scorching accessories is fed into one pipe, which will again go into the boiler. Above the riser, which controls the supply, there is a expansion tank. To help with this, it is necessary to take in excess coolant, which settles with expansion in the heating process, and also disappears from the system again.
When installing a fire in a private booth, it is necessary to follow the following recommendations:
- the boiler house is due to the mother's responsibility;
- for the creation of the best minds for the rush, run the next riser, what you give, it is necessary to insulate;
- the best place for placing the boiler is a point in the house, which may have a minimum height: a basement or a pit;
- underground riser, rozpodіlny piping and the return pipe are due to buti vykonanі z pipes with a large diameter, moreover, their installation is due to the transfer of the sevny stole from the direct relocation of the rodin;
- for the expansion tank and the collector with the best place for expansion, it is a mountain;
- with the method of increasing the durability of the opal system in the summer period, there was no trace of heat transfer from it.
The natural circulation of heat transfer is breathed in by simplicity and independently from other sources of energy.
Prote low KKD does not give the possibility of effective scorching of the buds, as it may be significant. The appearance of open breeding reduces the aesthetics of the interior.
Opalium system with primus circulation
The installation of the opal system into a booth, which transmits the primus circulation of heat, is necessary, as the tension of the heat-generating property does not allow the necessary temperature difference to be reached. In this way, for the creation of the necessary vice for the rush, the pump is victorious with pipes. We create primus circulation of heat transfer at a given direct line and reduce the consumption of thermal energy.
The presence of the pump in the opalescent system allows you to create the necessary microclimate in the beds of different surfaces, which may be a great area.
Krіm tsgogo, z'yavlyaєєstvo zdіysnyuvat regulivannya temperature mode _individually in the skin application of the version, as well as vikoristovuvat pipe with a smaller diameter. This allows you to save money on savings in the installation and operation of the system.
The main shortcoming of the organization of the scorched booth is the need for the presence of electricity.
With the power of the system of scorching, follow the recommendations of fahivtsiv:
- z'ednannya razshiryuvalny tank and pump need to be zdіysnyuvaty before wrapping;
- substitution of pipes, which can have a smaller diameter, change the volume of heat transfer and give savings in the case of higher installation work;
- the boiler house is due to the fault of the mother of the modern design and transfers the presence of automation.
One-pipe firing scheme
With a single-pipe rozvedennі ruh teplonosіya vіdbuvaєtsya sequentially from one radiator to the next, scho go after him. In this case, heat transfer is observed in the skin. Zastosuvannya tsієї circuit allows you to achieve significant savings in the cost of installation, so as to reduce the need for pipes and other vitrates, connected with it.
The system is not perfect and may have a number of shortcomings:
- the daily possibility of individual regulation of the heat output of the skin radiator;
- The skin stepping battery may have less amount of thermal energy.
For the creation of the possibility of regulation in an individual order, the robot of the radiators was divided into the so-called Leningrad scheme. Won transfer, to the view of the traditional one-pipe system, bypass pipe and installation of shut-off valves on all batteries.
Such a design gives the possibility of using opaluvalni without shkoda for the operation of the entire system.
Two-pipe scorching scheme
Zastosuvannya two-pipe system of scorching booths allows you to change the order of individual regulation of scorching devices. Tse reach s'dnannym s radiators and before filing, and before turnover. Such a constructive solution is to produce more materials. But the possibility of creating the necessary for the skin application of the necessary microclimate will compensate for this shortfall.
Installation of a vertical two-pipe scorching system allows for the implementation of the upper or lower branching, which goes outside the boiler.
Vertical system with bottom opening
Attachment of the system to the system is in the following order:
- At the bottom of the first, on top of the chi pіdvalu vіd of the heat generator, there is a main line.
- Risers are led through it, yak lead to radiators.
- The skin battery is running a pipe, as it is recognized for the introduction of heat transfer, which has put the temperature back into the scorching attachment.
During the implementation of the scheme with the lower branching, the possibility of remote control from the system is transferred. Tse zdіysnyuєtsya for the help of the installation of a special inspected pipe. Krіm tsyogo, the system can be secured with a expansion tank and Mayevsky's taps on the skin from the batteries on top of the bud.
Vertical system with top opening
The supply of heat during the implementation of the scheme is carried out by the main pipeline at the upper point of the booth. The transfer of heat transfer is carried out through the column of risers and pass through all the radiators. Motherland, giving warmth, collapses the main into the boiler.
The design of the opalizing system for transferring the lining of the expanding tank, which is necessary for the remote control, which is caused in the system. Zastosuvannya tsgogo variant of breeding allows more effectively vikoristovuvat energy, oskolki can zbіlshennya vice in the system.
Horizontal firing system
For the organization of scorching in a private booth, it is better to install a two-pipe system, the circulation of energy in a primus stove. You can implement it for one of the schemes.
Tupikov
When її zastosuvanni reduced the need for materials. Іstotna dozhina to the singed contour is the main shortfall of this option. Tsya furnishing is a passage for regulating the system.
Vodyane singed booth With a passing rush, drive
Dovzhina konturіv scorched with simple regulation of the system. The variability of the design is increased at the connection from the greater number of pipes. Of cream, a similar design does not embellish the interior.
Chair system Collector Rozpodіl
For this type of connection, the radiators are connected individually to the collector. Rivnomirny rozpodil heat in the premises of the booth is easily accessible with the right scheme. With the help of labor, the need for materials is more and more. Installation of pipes at concrete screeds will significantly improve the interior space, which causes an increase in the popularity of this option among forgetful people.
Collector Rozpodіl Scorching behind the heat scheme
In the rest of the hour, there is a trend towards a variety of combinations of opal systems, one of which is the heat of the podlog. Today, the boiler house has the technical ability to implement such a project.
Warmth Organization of heat supply with rare heat transfer can be low:
- There is an even warming up of the lower part of the place of residence, the life of the people is decomposed. The relevance of such a system grows every hour of warm weather in high places. Minds can save up to 50%.
- Heat transfer depends on the industry, which is pleasant for people.
- The decrease in the concentration of the saw continues to decrease due to the presence of convective heat exchange.
- Pretty good looking accommodation for safe visual visibility of scorching accessories.
