Fixing zmishuvach at the bathroom to the wall

You can fasten the zmishuvach at the bathroom in two ways - on the edge of the bath or directly on the wall. Obviously, the faucet on the edge of the bath is better and prettier, but don’t start and open the font in the font. Especially, it is worth mentioning the massive chavun constructions. Today's language is about those who seem to be strengthening the zmishuvach at the bathroom to the wall. Reportingly, we’ll sort out at whom food, so that you could save the family budget, having beaten such a robot with a hand.

Vimogi to a good zmishuvach:

• Masa. A model with a trivial service term cannot be light. Chim tovstіshiy metal, Tim faucet is good.
• Prepared material. Larger zmishuvachiv vikonan from brass and silumin. Brass virobi expensive and privablivi zvnі. Siluminoví zmіshuvachі cheap, but the handles and the tight nuts are a weak place. In addition, silumin constructions may be less mass and easily deformed in the process of exploitation. Brass is a more viscous alloy, so the need for pressure nuts is greater. Creamy, brass is not so strong to corrosion.
• Vіdpovіdnіst up to the month of installation. Obov'yazkovo zvernіt respect, for some type of installation, that chi іnsha model is recognized. Zmіshuvachі, recognized for mounting on the wall and on board the bath, not interchangeable.
• Rosemary. Give respect to the length of the spout and the hose. If you do not know the location of the installation, such a crane will not look beautiful, but it will be hard to do it.

Necessary tools

Before that, how to fix the zmishuvach on the walls near the bathrooms, get the following set of tools:

• A set of twists (flat and cross).
• Rose key.
• Tape and FUM-string (її can be replaced with plumbing linen).

Dismantling the old crane

The old crane, which used its resource, is seen behind the following algorithm:

1. Turn off the water at the bathroom.
2. Vikoristovuyuchi rozvіdny key, let down in the faucet homeland, which is lost.
3. Gently twist the old zmishuvach and clean the cracks in the winding on the stationary pipes.

Important! It is necessary to take care of the border protection, so that the cutting on the stationary pipes was not damaged.

Crane installation

Buying a new zmіshuvach, respect for the completeness of the equipment. The faults are present in the set:

• Shower hose with watering can. Here, as it seems, fantasies are here to roam. Shower heads can be different - from the simplest shower heads to "fancy" designs with a dekilcom water jet supply modes.
• Crane block.
• Gander.
• Eccentrics. All these are lowered adapters, one of them closes to the trumpet, and the other goes straight to the sound. The parameters of the eccentrics are different, all fall in the same model.
• Padding. The stench can be gum or silicone.
• Decor (vіdbivachi).

Important! The skin of the elements is responsible for the mother of the packaging. Necessary is also the presence of the reporting instructions, connected with the folding.

The installation process follows the following algorithm:

• Z'ednayte body zmіshuvacha zі hose soul, lіykoyu gus. The goal is to do simple manipulation, so that you can do it without using tools on your own.
• Mount the eccentrics. In addition, as the fittings are fixed, lay the quality of the crane fastening to the wall. To mount the crane on top of the drywall construction, vikoristovyte special adapters for frame type construction.

Important! For waterproofing, it is best to vicorate plumbing linen or FUM-strip. The control of the correctness of screwing in the eccentrics is to be followed by the help of the budіvel equal.

• In addition, as you have crossed over, that the fittings fit into the wall plane on the same wall, mount decorative rivets, stitching behind it, so that the stinks lie down to the wall even better.
• Screw the body. When mounting the body, on the top of the eccentrics, it is not necessary to mount. The function of priming is to install gaskets, which should be used with the head set.

Features of installation on a tiled wall

Most often, at the bathing room, the chimneys were blown, and sometimes they were drilled open at the stove. For drilling, open the drill with a diamond drill. Tilki z yogo help open to go out ideally equal, without underwear.

For rozrahunka mіstsya fixing zmіshuvacha vikoristovyte the following algorithm:

1. Measure the height of the bath.
2. Add 100-200 mm to the final figure. All to lay down in order, what dozhini vyliv zmіshuvacha (160-400 mm).

Important! It is necessary to install the faucet strictly in the center of the bathtub, depending on how wide it is. Vіdstan mіzh kutovymi fittings (press-water sockets) to become 150 mm.

How to fix zmishuvach on drywall?

The installation procedure is similar to the usual one, only a special bar is installed. The slats under the drywall do not have to be put on sale, but with success you can win over those that will be fixed for the capital walls. Let's look at how to fix the bar of the zmishuvach to the wall:

1. Close the bar at the back from the plywood sheet.
2. Attach a sheet of drywall with screws.

After the installation of the plank under the zmishuvach from polypropylene, the installation procedure is the same, as it sounds, like a capital wall.

Like a robot, you are given too much folding, turning to fahivtsiv. Obviously, it is connected with additional vitrates, but there is no doubt about the result.