Razvedennya scorching at a private booth
The design of that lining of the scorching system in the booth can be done in different ways. Already at the stage of folding the project, the next step is to choose the most optimal option, which will help the reality of the mind of the Lord, not exceeding the planned budget.
The most important financial solution is the option of a one-pipe solution of the scorching system. Two-pipe singed wiring can cost a little more, but the efficiency of this method is significant.
Popular ways of breeding scorched
In the modern interior of a private booth, they often place a fireplace or a fire, ale stench, more for everything, carry a decorative function, which reinforces the individual style of the booth, so as the main focus on the scorching lies, on one or two contour boilers are heated. The principle of operation of a single-circuit boiler works all the time in a safe scorched booth;
Independently of the type of scorching boiler, for lining an individual scorching system, it is possible to vicorize both a single-pipe breeding scheme and a two-pipe one. Let's take a look at their main features, and try to figure out who has the skin type.
One-pipe sputtering system
The principle of such a system is even simpler: when scorched, only one pipe is installed, as if creating a closed ring. Batteries are connected to the system from the skin room at the booth.
There are two ways to obliterate such a system:
- horizontal;
- vertical.
The horizontal method of lining a single-pipe scorching system with a lower opening is more popular, because a simple design can be achieved. In particular, a special way of laying, when the pipes are installed, the mother is guilty of a small trick in order for the heat-carrying moment to easily circulate throughout the system.
The nuances of laying in a horizontal way are blamed on that slope, if the scorching is mounted on a richly topped booth. Then, at the entrance to the cob section of the radiator, roztashovanoy on the first version, it is necessary to install a valve, which is often interrupted, which can create the necessary pressure for the circulation of heat on the upper surfaces.
Respect! Regional vertical expansion of scorched pipes in a private booth, it is also important to secure the expansion of the risers. It can only be vertical, and the pipes can be three times larger in diameter, lower when mounted in a horizontal layout.
One of the advantages of a one-pipe scorching system with a lower outlet is the need for a viscous connection to a circulation pump.
Advantages of single-pipe scorching:
- good savings on materials, small pipes are needed;
- the scheme of divorce was even simpler;
- razumiliy razrahunok hydraulic navantazhennya on the pipe
Ale, unfortunately, after all the positive moments, I will repeat one minus. Vіn polagaє y znachnіy vtrati teplonosіya teplosіє іn vіddanny vіd vіd boiler scorching. Tse means that the batteries in the furthest rooms will be three times warm.
You can correct this situation in the following ways:
- zbіshiti zagalnu kіlkіst sektsіy near the radiator, near the world yogo vіddalennya vіd boiler;
- install special thermostatic valves on the radiators to regulate the amount of heat supply to the skin radiator;
- install a circular pump, which will reduce the pressure on the necessary level, and accept the correct distribution of heat transfer along all the lines.
One-pipe scorching in a private booth will become optimal for lining the scorching system in a single-surface frequent booth, with an area of \u200b\u200bnot more than 100m², with no need for additional attachments of the "heat of the bed" type.
Pipes for scorching systems
Practice has shown that for laying the pipeline of the opalescent system, most often vicorist is made of metal-plastic, polypropylene, steel, copper, as well as pipes made of stainless steel and galvanized steel.
Let's look at the skin view of the pipes in greater detail:
Visnovok
The design of that obshtuvannya opalyuvalnoy system of a private booth - an occupation that will require an hour, knowing that pennies. That, in order to get a pardon, it’s best to turn for help to do your job professionally. Even if the correction of the short-lived can be costly, it’s better not to let it happen on the cob.
How to correctly vikonate an independent two-pipe fire in a private booth is recognized in the coming video
