Do-it-yourself house repair in the countryside.
Axis so vіglyadav before repair ... Wood rotted ramie, closed zvnі zvіynoy plіvkoy, vіd і cold i vіtru ... Angry old veranda with drooping visor ganka ...
For the quiet, who deserves to work on repairs at their booth, є ...
The axis was such a vikna that pіdvіkonnya.
We began to arrange the houses from the foundation.
We cut the booth along the curve, we saw that the decks of the vineyards were rotten for additional chainsaws, we put up the formwork, we put large stones and rubble, we lay the reinforcement, so that the walls were filled with water (for further bonding with the pouring foundation), wrapping the decks in the foundation. cabinet is ready.
And so muster chotiri kuti booth that in the middle of yogo, around the perimeter. Together - 8 pedestals. The process is laborious, important, but the result of that warty ... If the pedestals were finished, we made a prize along the entire perimeter. Prodovzhennya zovnіshnіh robіt was rescheduled to the coming summer. And we were engaged in internal repairs of the booth.
This is a big room, and it’s good for her. She looked like this before the repair:
Tse її right kut ... and tse in the photo below is the left kut. At the process of writing by those, I cherish these two kutivs ...
On the back of my head I saw all the balls of the old tapestries. Vіkna bulische old, ale mi already minted on the minestrіv by installing plast.vіkon.
The old pіch was taken apart ... and the pіchnik made a new one.
AND THE RESULT IS NOT FORGETING YOURSELF A LONG CHECK...
After the installation of vicons, the people began to sort out the old log, revise the lags and put tumblers under them.
Then they laid the bed with old boards (the stench should serve even longer, for the one that is dry), and in the places, they were rotten, replaced with new boards.
I installed a metal-profiled frame for the walls and the stele ... my pardon was in the fact that it was necessary to work the stele on the back, and then the walls, and not navpak. blame it for food, I’m happy with it, I know ...
On the stele, the frame is folded richly, it hurts.
If the metal frame is ready, you can sew it up to the new gypsum plasterboard, bazhano in the check order, start with the steel! Do not forget to lay out the electrical wiring and shove it into the corrugated channel, behind the profile, and install the boxes - sockets at the place convenient for you.
On this sign, you bachite wooden blocks, I screwed them for further reinforcement of the book police.
If all the walls and the stele are sheathed with gypsum plasterboard, we use a spatula with a putty knife and we check all the sticks between the sheets and screw the self-tightening axis with such a warehouse.
At the corners and seams, we lay a reinforced mesh for the quality of the soil, and after that, as everything is dry, sanded, we apply a primer on the walls and the bed.
And at the same time, the most important moment is the gluing of tapestries. I took vinyl white on the stele and with lower trojans on the wall.
If the trellises have dried up, I am for mutual benefit
she asked for a brigade of workers, so that they finished their work in the tsіy kіmnaі by vykny (mowing and pіdvіkonnya).
After that, I glued the stele plinth, hung the police on the wall, put my tickets on the ceiling, as the lads from the firms had already installed us.
Teslyar did help to put the doors in the middle, but then I realized that I was standing uphill with my feet ... (like a difference!) Abi functioned normally ...
Open the door with a white patch on rare flowers. From the right side of the pectin is new, singing all the stones in the eye.
The firebox itself is located in the bathroom.
I put a lining on the black lining, then fiberboard and linoleum. Then I screwed the skirting board with self-tapping screws and voila-beauty!
Axis scho stuєtsya tsієї velikoї kіmnati.
Who among you wanted more details about the concrete bollards, I added the details to that ... Later, a layer of windows was inserted, the booths were sheathed with flat slate and the request was broken up near the booth, until the onset of summer ...
Now let's talk about the new work, after the end of the cold winter and spring ... on the onset of summer.
If all the pedestals are ready, step by step, opening the skin of the 3 sides of the booth in the air, you can see the rot of the deck of the lower crown, dry - wrapped with waterproofing,
we install the formwork, lay the reinforcement, connect with the ends of the reinforcement of the end bollards and fill it with concrete.
