Repair of the steel in the kitchen with your own hands - budget and expensive options

Do-it-yourself repair of the stele in the kitchen was especially difficult, because steam, boiling, temperature changes and other negative factors are constantly added to the finished stele.

1

Mayzhe be some kind of repair of the stele in the kitchen starts from the removal of the old trim. This process is not as simple as it can be for unseen home masters. It is necessary for us to prepare the mass of pritosuvan and tools, without which it is important to cover your cover. We need:

• mittens, zahisnі eyepieces; in some cases, a respirator;
• drabini;
• a metal shield and a spatula for removing old farby or whitewash;
• ukrivna plіvka and scotch tape;
• a hammer and a chisel for removing plaster;
• cebro, sponge, gardening or special spray gun;
• roller (bazhano, shob yogo villi boules as long as possible);
• file grinder;
• perforator.

Zyattya old pokrittya steli

As if in your kitchen the stele was beaten with a creid, you will simply replace the old cover for help, drive that roller or ganchirka. With vapnyanimi pokrittami, as a rule, cheaply folded. It is necessary to soak small plots on the surface with water and checks of khvilin 20, until you make a stele.

The next step is to brush it with a spatula and carefully scrape off the old coating. Deyakі mіstsya, mozhlivo, happen to be cut with a perforator. Vіn zazvichay nemіbnіy for vydalіnіn tverdilih ozdoblyuvalnyh vіdkіvі v stikakh slabs rekrittya.

The plaster is mined for the help of a hammer and chisels in a mechanical way. This operation is laborious. You need to use the old coat on the back, and then clean it with a spatula or a metal brush. Approximately in the same way they know the old farba.

Before the cob of cleaning, cover all the objects and equipment in the kitchen with hot water, fix it well with painter's tape. Do not forget about your safety - put on your eyepieces, respirator, gloves. You are being checked for brudna and the robot is covered with powder.

As if under the old dressing, you sang a splash, and it was necessary to make the clothes obov'yazkovo. For this vikoristovyte Bіl_st or similar zasіb, scho to avenge chlorine. Kindness is protected from flowers and special antifungal warehouses. Obrobit them the entire surface, and not just a litter from a flower. And then the fungus will never show up on the stele.

2

If you are planning to rebuild the bed again, or do some yogo, you need to fight about those who will win in a fair way. Surfaces with height differences up to 1-1.5 cm are not allowed. In other cases, the next step was to plaster the stele. In domestic minds, this operation is carried out due to the congestion of fiber mesh and beacons. The scheme of vikonannya robit є porіvnjano is simple. it is necessary like this:

1. Know (wycorist water or laser rіven) the lower point of the stele (black).
2. Install beacons (stench with metal profiles).
3. Throw a plastering warehouse between profiles, spread it with a spatula. Sumish can speak for the lighthouses. If the whole stele is broken, take the rule and use zigzag-like rooks to fill in all the plaster.

The process of resurfacing the steel

Important clarification! The plastering warehouse is fenced in, apply plastering over 2 cm.

Such a ball is not suitable for the unevenness of the stele, the next one is plastering.

You need to get the first ball, and then squeeze it into the new special net. The next time, apply the plaster again.

If the drop in the insole surface becomes 2.5-3 cm and there are large cracks on it, the treatment can be carried out using this technology:

1. Expand cracks with a spatula. Clean it thoroughly.
2. Primer prepare the gully.
3. After hanging the primer warehouse, blow out the cracks with mounting foam.
4. Check on the extraction, clean up the stump of the pin (clear with a knife), refinish the surface with a primer.
5. Apply plaster (for an additional spatula) on the cracks (put a warehouse on the need for a thicker coat), and put a sickle on the beast (reinforcing a stitch).
6. Plaster the line.

Virivnyati steli with differences more than 3 cm to the great home master is not under force. It’s better to ask a specialist for this type of work, who can start working with special dowels, which are reinforced with important meshes from metal, special food-cement warehouses of the Rotband type.

It is even simpler - to use the traditional options for dressing the beds (washing, fermenting) and working on your own kitchen substructure. Todі folded and laborious robіt z virivnjuvannya surfіnіvnі can work zovsіm.

3

Before zastosuvannya farbi (as well as polkovogo rozchinu) virivnyanu stelovu surface next zashpatlyuvat. To fight with the prices of gypsum warehouses. Їx is applied with a spatula (bazhano vikoristovuvaty wide tool) in one ball, and for consumption - in two. The thickness of the applied putty is small, close to 1 mm.

Farbuvannya stele in the kitchen

After 6-7 years, the stele is overwritten and sanded with a grinding machine (for її days - manually), treated with a penetrating primer. After all the work ahead, you can boldly proceed to the fermentation (whipping) of the surface. How barvniki most often zastosovuyt kreydyaniya rozchin, vapno, acrylic or.

The water emulsion is formed on the stele to make it pleasant and even a thin ball of covering. Prote vapnyany or kreydyany rozchin vmagaє minimum financial expenses. In addition, such warehouses are environmentally safe. Even if the drink does not attract you, you can vicorate acrylic farby. The stench is expensive, but they are characterized by vіdmіnnoy dekorativnіstyu and spravzhnoy esthetics.

Before speech, stele, stuffed with acrylic bags, it is allowed to clean in the process of their exploitation with miles and warm water. The price of Vіdriznyaє їk Vіd stern, the rapid root of the reservoir, Yaki is not Mitya. Such steles can no longer be wiped with a lightly soaked ganchirka (or rather dry ganchirka) without rubbing.

A bunch of specialists. The kitchens are lined with not glossy, but matte warehouses. Remain good to take small surface irregularities. And the axis of the glossy farby, on the other hand, is digging out the shortcomings of the self-sufficient vyrivnyuvannya of the beds.

4

You can inexpensively repair the steles with a path pasted with trellises - embossed, which miyutsya, recognized as a farbuvannya. Professionals recommend vicoristing embossed or soft materials. The first buildings prihovat under themselves deyakі nerіvnostі surface stele. And the virobi, which are miyutsya, are themselves ideal for a place to be, de getting ready for a hedgehog. Zvernіt respect - the sticker of the tapestries is carried out on the virіvnyanu surface.

To make a kitchen stel without ribbed stains, you can also use expanded polystyrene plates. Installation of tsikh virobіv duzhe simple. Usі nastanovnі roboti easily vikonaє zvichayna lyudina zіnіmalnym dosvіdom prosvіdnі repair zahodіv. True, such plates are characterized by low nedolіkіv. stink:

• filthy v_dmivayutsya in the woods and sticky fat (and how is the kitchen without them?);
• hygroscopic;
• fire-safe through its increased combustibility.

Tiles made of styrofoam are good for kitchens with sweat-wicking and wickerwork, if you are planning an inexpensive and quick repair.

Taping the stele with tapestries

More hygroscopic - drywall (gypsum plasterboard). Ale yoga is often used to repair insoles in kitchens. It is due to the fact that the sheets of gypsum board give the opportunity to form rozkishnі from the point of view of the design of the stele construction on the kіlka rіvnіv. And the problem of high hygroscopicity of the material is not turbulent for you, as you will receive a special moisture-resistant GKL.

Important moment. When installing gypsum plasterboard sheets, it is necessary to lower the height of the beds, which is critical for apartments near typical booths. So get ready to dodatkovyh robit pіd hour vykoristanny GKL. It will be necessary for you to putty the drywall on the bed, and then glue it with trellises or furbow.

Practical and beautiful, but expensive options for repairing kitchen insole surfaces can include the installation of tension and rail structures. Tension steles miraculously look, they vibrate with different design variations, the stench is easy to miyutsya, do not fade under the sun and may be resistant to temperature fluctuations. Analogous positive characteristics describe rail constructions.

Like Bachimo, the repair of the insole surfaces in the kitchen is contemplated for different technologies at the same time. You only need to choose the method that suits you.