Zmishuvach spool type

⁰

Our bathrooms are widely populated with zmishuvach іz push-button switch "shower - wiliv". Few people use such titles as zmishuvach of the spool type. Below you will know about some of the particularities and about those who are likely to get rid of the widest inaccuracies.

The flexible hose at the spool valve has a special outside valve, which has a gum gasket with a special pivkiltsevy opening in the middle. As soon as the water in the system suddenly hums, then as a result of the discharge in the pipes, the water is directed from the tub into a flexible hose, and the strumming of the mute locks the hose, laying the gaskets, which protrude, onto the butt of the adapter. Like a small vice, for example, on the upper surfaces, a valve is removed from the zmishuvach, so that the veins are not repairing the supernaturally high support of the water.

The valve is dismantled in the following order: screw in the cap nuts for the support and the flexible hose. Dali vyymayut valve and yogo place to put a simple gasket with a valve. The operation is completed by screwing the union nut.

One of the vuzlіv zmіshuvacha z trimach mає lіve rіzblennya's soul. For reasons, it is recommended to add a plate or a socket wrench to turn the fitting in the required direction.

Like water, unfailingly at the turn of the switch, flowing only into the wind, you happen to pull the spool out of the body, for which you need to take a gnuchky shower, after which you put in the adapter with details, like to sit on a new one. Then we turn the indicator, turn the screw, take the handle, turn the cap nut and turn the crank. After that, vishtovhuyut the spool from the bottom from the body.

Zmіshuvach іz spool and podstavkoy, scho mає humovі kіltsya:

1 - valve with gumi; 2 - adapter; 3 - fitting; 4 - support; 5 - the body itself; , 12 - twisting, 13 - gum ring to the crank.

At the bagatioh zmіshuvachiv, the spool of the spool protrudes gumovі kіltsya, like they are stretched on the surface of the yoga. Exactly the same rings of possession of the crank are there, de vin are attached to the hull. Such rings are quickly erased, but it’s not easy for them to know the change, and it’s necessary to stock up on a pair of zayvo.

Gumovі kіltsya znіmayut іz spool with a twist or a thorn. After tightening the new rings, it is necessary to soak them with water, so that the spool can easily enter the body. Moreover, the groove from the grooves on the spool should be directed there, where to insert the crank finger. If you don’t try to take it easy, then it’s better for everything, we’ll crank in the case, and in such a state the jumper won’t work.

As if on the spool, the gum rings were erased and you can’t replace them, wind up the thread under the old ring or the middling thread. It is not recommended to go into the pursuit of self-confident cells - most of all, the stench is not docile.

Traplyatsya, after the installation of a new zmishuvach, the water immediately enters into the winding, and into the flexible hose, and do not help the crank by turning the cranks. In such a state of mind, it is necessary to pick up the jumper, pull the spool, and take a serious look at it. As a matter of fact, the humic rings are not worn out, the spools are given to the spool, which have been left behind after a non-existent dressing. In such a time, the gums are taken, and the ducts are filled with sawdust.

If the crank handle drips drops of water, then you need to tighten the nut more strongly. If such an operation does not bring the desired result, it is recommended to repair it with the ring of the crank in the same way, as with the gum rings of the spool. Also, the tekti should be pinned down, as if to wind a thread of narrowing (hemp, lyon) at the gap between the stoppers and the gum rings to the crank.

The scheme of the robotic spool switch:
1 - spool; 2 - crank.

Fitting wyvern:
1 - support; 2 - gasket; 3 - fitting; 4 - socket wrench.

Often, an aerator pulls on the outer part of the winding, which allows you to save water. After a deaky hour, particles of scum, squeak, and irzhі will smear the grid. In such a swing, the aerator is covered with 1-2 balls of an insulating stitch, so as not to damage the cover, and turn it with pleats. Further, following the principle of leakage, it is necessary to wash the mesh and other details of the aerator.

On some models, the bracket for the shower can be replaced with a barbell, which can be fixed to the wall, and then tucked into the shower. Moreover, it is necessary to fasten, so that the barbell is correctly put on the clamp, and zmishuvach comes to the pipes in such a rank, so that the hose is wound uphill. Wanting a pardon in such a mood is not tragic, having twisted the rocks and the flexible hose, you can remember the missions.

Water is poured onto a flexible hose and at the gate directly by turning the handle, fixed on the cranks, which moves the spool uphill and down. At the ends of the spool there are gaskets, which close the opening for the passage of water through the adapter and the body alternately. If the gaskets are worn out, the stench does not cut off the windows, and the water can come in one hour and in the shower and pour.

Shchob z'yasuvati mill gaskets, v_dvertayut nut hose hose and znіmayut yoga.

If the screw is twisted, the spacer can be replaced with an additional hook from the dart. Through those that sound a new gasket, do not follow the comrade for the opening of the corps, bring the jumper, starting from the adapter, turning around. After removing the handle, turning the special screw and twisting the crank to win the spool, it installs new gum gaskets. Folding is in order. Dodatkovo can be put on the stuffing box indented with shreds, having stripped two or three turns of indentation from the side of the entrance, bare, thereby turning on the possibility of indentation when the special screw is gorged.

Refilling in the crank seal:
1 - crank; 2 - body; 3 - special screw.

Replacing spool gaskets:
1 - gasket; 2 - spool.

How to choose a zmishuvach for a two-valve bathroom

Early chi pizno skin zmishuvach at the bathroom can get out of tune. Find the best models if you need to repair or change. Most of the breakdowns are caused by double-valve type taps, which are used for supplying cold and hot water for the help of two handles, which are used for adjusting the vice. All to the fact that the valves regularly turn around and spend their working hours every hour. Everything is not so scary for Prote, you can pick up the shards of skin of a zmishuvach with your own hands. Ale yak rozіbrati zmіshuvach at the bathtub of a double type, it’s not enough to know. At the same time, it is recommended to the readers of the site "Remontik" to respect the peculiarities of being double-ventilated type.

Features of double valve type

The main task of the faucet with two valves is the regulation of cold and hot water in order to achieve a perfect temperature regime. Such a model has long lost its popularity, and it is less for deyakі lords to give priority. Irrespective of the popularity and success of one-size-fits-all zmishuvachiv, such an option is considered to be the cheapest, and if you compare technical displays, then they stink a little one way.

At their own discretion, the valves are subdivided into the following types:

with ceramic discs;

with elastic gaskets (with silicone, gum and other).

Independently of the opposite type, instead of the double-valve type, they miraculously work both with disks and with gaskets, and the stones are interchangeable.

Crane design features

As a rule, zmіshuvach vikonuєtsya from brass, more from steel. Brass is the best material for such a plumbing fixture, shards won't continue their terms of exploitation and have a bright, splendid look.

The switch turns on the spout, in which the hot and cold leads and two valves (faucet-boxes) are blown. You see so see the zmishuvachiv:

“Yalinka” is a plumbing fixture, a kind of maє triynik. Near the building there are a sprinkling of canals that connect to the water supply through a tee. In the mountains of the faucet the stench stinks;

With pipes. The simplest option. There are two branch pipes of hard or flexible wiring, for the help of which you need to connect to the water supply.

Before that, how to pick up a zmishuvach in a bathroom of a two-valve type, prepare all the necessary tools. You need:

twist;
rose key;
be like matter.

Crane dismantling

Such a procedure is clumsy and does not require special skills. Sufficient for the mother with her own collection of the necessary tools and the support of the vikonati work independently. The dismantling of a zmіshuvacha of this type is necessary to work at the time of the appearance of the first leaks (the valves are rottenly regulated, otherwise a small stream of water is leaking).

Respect! Malfunction of the crane vimagatime negai repair. Otherwise, an accident may occur, and as a result of the high pressure, drive the hose simply wirl.

First, proceed to the selection of the zmishuvach, spread a cloth on the bottom of the bowl of the bath, or otherwise cover it. It is allowed to save the surface from the chips in the fall of the parts of the zmishuvach chi tool.

For dismantling, you need a rozvіdny key or twist. Such a robot is miraculously known to wealthy people, and to other people, who have never run into a crane, it is necessary to carefully read the instructions and do it. Stand up to work respectfully and at any time do not rush.

The first stage of successful plumbing work starts from the inclusion of water supply;

Pour out excess water from the hose.

Shut up the anger with a ganchirka, so that they don’t waste the details.

For additional twisting, pull up plastic decorative linings on the valves, which mean cold and hot water;

There are screws under them. Twist them with a twist;

They gave for the help of a rose key, it was necessary to turn the crane axle box, so that it was possible to pick up the parts of the crane that were left out, and turn it over to the presence of sighting, breakdowns, and other causes of malfunctions.

How to replace the crane-axle

As the cause of the breakdown, having become out of tune with the crane-tow, you can simply replace it with something else. At the store, you can add new details or replace it again. Obviously, the remaining option will be shorter.

Let's give a cover instruction:

For the cob, remove the cap from the flywheel. For whom you need pliers. Under them there is a screw and a schob to reach the valve of the zmishuvach, it is necessary to twist it;

Open the valve to go out without starting it, even if it is under the hour of operation, the wines sometimes grow tightly with the tap. However, if the valve is removed, it is necessary to clean the cut. Come and clean the flywheel. For a lot of rocks there, a lot of smittya is picked up;

Dali necessary to fix the fittings of the crane. It is possible, for whom it is necessary to report singing zusils. Take pink pliers and wink them to select fittings:

If the fittings are taken, you will remember the axle box, as it is screwed into the crane. Persh lower vivertati, varto pereviriti, chi is included in the riser water. Don’t kill Vitsogo, water flows after taking the tug from the tap;

After that, as you unscrew the box, carefully clean the cracked tap. Tse to fight, so that the detail is more enlarged according to the cut. Otherwise, there may be a loss of smіtta, and water will flow from the flywheel and spout;

The skin faucet will need its own faucet-books. To pick up the warehouse part in terms of dimensions, cut it in other parameters correctly, take it to the store. It will be easier for the sales assistant to choose the right crane box for you;

The installation of the zmіshuvacha is carried out in the following way, we wrap it up before dismantling.

We replace the gasket

Another broad reason for the breakdown of the seal is the wear of the gasket. For її usunennya, it is necessary to dismantle the crane and replace the gaskets.

The consequence of the dismantling of the double-stranded zmishuvach will be permanent. If you unscrew the crane box, it is necessary to replace the gasket.

After replacing the gasket, remove the tap and increase the water supply at the riser. In general, you won’t take a lot of work from you for an hour.

How to repair the crane seat zmishuvach

In case of approved chipping, the shortness of the saddle є mozhlivist yogo repair for additional grinding with a milling cutter with a victorious drill.

Another solution is to repair the seat with a lap. The wine is built up from the base with two twine narrations of a different crochet, so you can beat it for any boxes. After grinding the seat, it is necessary to pick up the metal shavings. For whom you need to dismantle the jet regulator, plug it open, and then, without haste, add water for a few seconds.

Intercession activities:

Vikonati rozbіr crane, take axle boxes;

Carefully perevіriti camp sat with his hands. It is not included that the cause of the breakdown was the presence of a pile or a scum of the vapors.

Screw the rubbing into the faucet;

Dekilka once turn the handle of the fixture;

The work is completed, you can click back.

Respect! Do not forget to turn on the water supply to the riser.

Like bachite, you can find the cause of the breakdown with your own hands. Tim, who doesn’t know how to choose a double-ventilated type in the bathroom room, you should familiarize yourself with our cover instructions, respectfully watch the video, so that you can see the sequence of events.

Varto signify that the double-ventilated type of the zmishuvach is a classic, as it is victorious for hours of the Radian Union. Irrespective of those who squandered their popularity with the fates of the outbuildings, most of the lords give priority to the virobs. Everything is simpler: for technical indications, the model is similar to a single-head crane, but the versatility is less rich, and the repair of the viconate is richer and simpler.

The two-valve faucet includes a warehouse spigot, which are fastened sequentially. The installation and dismantling of yogo took away the sprat of thinness, and the newbies needed more than an hour. You can easily find inexpensive components for fixing a breakdown before you change. You won't be able to hire a plumber from a living company, you can do everything yourself. This is a miracle economy of that penny, you won’t be able to spend a long time on a maistre, the servants of such a cost are not cheap.

Crane-tow repair at zmishuvachi: video