Do-it-yourself scorching water of a private booth that yoga scheme

Oblashtuvati comfortable life far away from a powdered, brudny place, traffic jams and eternal non-gamous noise, in the soul of a leather city dweller. Everyday susіdіv, purely poіtrya, calm that nature is gone. For a comfortable life in a zamіskom boudinka, it is necessary to have modern conditions that hope for civilization: light, scorching, water. With light, there are no problems, electrification in the country on the river, for driving the Sverdlovina is rushed. Ale s scorched folded. It’s not possible to drown the Russian food every day. Good decisions will be the water-burning of a private booth, crushed with your own hands, and the schemes are simple and understandable.

The principle of water scorching works in the offensive: metal pipes are stretched along the booth and radiators (batteries) are installed. Hot water flows through the pipes, drank in the radiators, it gives warmth to the extra space, heating the life.

At the borders of the place, the booths are scorched for additional heated water, as it is supplied by pipelines from the boiler house on the territory of the place. For a private booth, you need your own system, that boiler house.

The simplest system of water scorching consists of advancing parts:

• Boiler;
• blow;
• Radiatori;
• Pump;
• expansion tank.

Boiler

Without a cauldron, scorching is not practicable. Vіn pіdіgіvaє water, vіd the right choice to deposit chi and draw heat, chi will be the system effectively economical. At the end of the fire, the boiler heats up, water flows through it, take the heat and direct it into the burning booth system.

The boilers are differentiated according to the design, the type of fire, the use of computer control and the ability to automate the supply of fire.

The most popular boilers for the minds of Russia are made on wood stoves and gas.

The main parameter of the boiler is yogo tightness, won't be reduced to kWh and will be covered by walkers from the area of ​​the booth. The type of fire is chosen according to the special advantages and possibilities of saving.

For boilers that work on gas, a capacity is installed in the ground at the station house for gas storage, as you can recall, calling for special equipment. Capacities are rented for the season. The presence of capacity under the pressure on the dilyantsi є dosit without care. Gas is significantly cheaper for all the known types of fire.

For boilers, which are used on a wooden stove (firewood, wood, pallets), a boiler room is needed, a place for a stove and a safe place for ash. Ash- Tse nezgorіli surpluses of a wooden fire, like a cauldron in a year. Periodically, such a boiler needs to be cleaned from the soot, ventilate the ash and ventilate it in a container so as not to burn.

The ashes of the cauldron can smolder for three or three days and can become a cause of fire. I stole the ashes vikoristovuyut like a dobriva.

To support the mountain, it is necessary to fill the boiler with firewood. Fallow in the design of the boiler, pressure and expansion, it will be necessary to work once a year or a few days. The boiler rooms are more likely to have a fire extinguishing system and an alarm system. If everything is set up correctly and for the sake of correct operation, the solid-fired boiler is absolutely safe.

The modern Kazans are not just rude potbelly stoves. The design is more foldable and won’t ensure the maximum coefficient of core fire, which makes the boiler more advanced according to the technological plan, more quickly and more scorchingly and less overburdened with unburned parts. Technological boilers may require a singing type of fire. The boiler is practicable and can only be insured on expensive Finnish pallets;

Modern boilers are equipped with electronic and computer heating systems, which allow controlling the temperature at the boiler. On their basis, you can implement such a kind of “intelligent booth” - organize the management of the boiler on the basis of a program for a smartphone or for additional SMS. Such a booth can make you feel warm while the master does not have a booth and warm up before your arrival.

The cauldrons with automatic supply of fire are equipped with capacities and mechanisms, as if they themselves zavantazhuyut a cauldron with fire, for a certain hour, allowing the stoker to work.

You can also heat water with an electric boiler, the stench is the simplest at vikoristanni and service. It’s more necessary to connect to the border. Ale vitrata energy will be great, and the fireworks for the electrician will shock the housekeeper.

The cost of burning with electricity is at least 4-6 times more expensive for gas and firewood.

Whether it be a boiler, it can itself perform the function of a clean heating of hot water for domestic needs. Otherwise, in a pair with a burning cauldron, for such a help, you can install an electric one.

Trumpet

Vykoristovuyutsya steel and plastic, different in the method of installation. The only thing that varto vrakhovuvat tse їhnіy diameter - vіn is guilty of but sufficient for the passage of the necessary amount of water. When installing pipes, varto podbati about the necessary number of shut-off valves and the organization of the water drop system. If the boiler is broken, the water at the pipes can freeze. Zvichayno, it’s not mittevo to trap, in a warmed booth it’s a process of a few days. Aleksho tse all the same to get drunk - start the system of scorching with water, which is frozen, it is impossible in the pipes. To be deprived only of seeing them and installing new ones.

To zapobіgannya such inaccuracies varto step behind the camp of the boiler, blow the trumpet, which is on the street and pour out water for any doubtful situations.

Deyakі vlasniki budinkov zapovnyuyut pipes with antifreeze. However, this is not a panacea - antifreeze can become inaccurate or diluted with water and freeze already at minus 12 degrees Celsius.

Connecting pipes or dividing, maybe single pipe or double pipe.

1. At the first turn, the radiator exits are connected to one pipe, the water flows like through the radiator, so it goes through the pipe. The scheme is simple, but the KKD is smaller, the fragments of the hot water part turn around without heat transfer. Water simply flows through the pipe, lower through the radiator.
2. Two-pipe scheme connecting the outlet and outlet of the radiator to two different pipes: supply and return. The entire flow of heated water passes through the radiator and straight through the other pipe back to the boiler. Such a vimagatime system is more bred, but її KKD is more inconspicuously.

Radiators

Radiators tse attachments for transferring heat from heat transfer, stinks are covered depending on the parameters of the system. These areas are due to be optimal, water is due to pass through them and provide the maximum amount of heat.

Teploviddacha is an important characteristic, as it shows how effectively the radiator delivers heat in the right space.

Pump

Sob heated water broke in the pipes, it is necessary circulation- Ruh drive. natural circulation- Tse ruh drive without a splash of piece factors. Vrahovyuchi, that one part of the water is constantly heated up, and the other part achieves such a pace independently. Ale, that's enough. Boiler without ruhu lead to overheat, which can bring up to yogo vibuha or spratsyuvannya emergency equipment. To achieve good circulation, an additional pump is installed. Vin pereganyaє water from one part of the system to the other, along a closed stake. Yogo characteristics are developed, depending on the parameters of the scorching system. Too tight a pump pushes water over it quickly, and you won’t catch your heat on the radiators. If the pump is not enough for exhaustion, we will not take enough water, it will be cold in the house, and the boiler will overheat.

It's better to install two pumps, so that one burns out. Without a scorching pump, it will sizzle.

Expansion tank and refill system

expansion tank or storage tank, is a metal barrel, as if it were scorched from the scorching system. If the pressure of the water in the scorching system falls (ducts), part of the water is taken from the same tank and the system continues to work normally. As the vice moves (the boiler begins to overheat), the tank accumulates water in it, and then bleeds through the outlet valve, which opens when the vice is moved and removes the pipes from the openings.

pressure gauge- a metrological fixture, a kind of vimiryuє vice on the dilyantsі trumpets chi boilers. What more їх is installed, then more beautifully. From time to time, the stinks go out of tune and start godlessly lies, so they need to be reconsidered at least once a river. If there are problems with the robotic scorching system, a pressure gauge can help.

For the normal implementation of the water scorching system, you need the help of specialists. It will be necessary to exactly open up the area of ​​the booth, the cloth and the material of the walls, windows, doors, pouring in a cold wind on the premises. After that, it is necessary to carry out the inspection of the pressure of the boiler and the pump, the pipelines, the necessary equipment is selected. The installation of the system's system is a complicated procedure, as it requires knowledge of the nuances and evidence.

Thermal circuit

So that the scorch was economically necessary to create thermal circuit. Close the room, where heat accumulates.