Installation height

⁰

The bathroom of the room is transferred to a constant victorious water, to which the installation of a zmishuvach is required to change the lining of the obov'yazkovo. In the inter'єri tsієї kіmnati tse an indispensable element, without which it is impossible to get along in a walk, even if the skin of a person corsages with him every day. For this, it is also important to correctly spread the zmіshuvach over the bathtub, so that during the hour of washing in and when you set the water, it will be less sprayed, and the attachment itself in the interior looks aesthetically pleasing. About the basic rules for the installation and installation of the particular element of water supply fittings, see this review article.

Zmіshuvachem is called one of the parts of the water supply system, which ensures the supply of cold and hot water and regulates the onslaught. For the help of the new one, you can cherubate with a stream of water directing him to the wind or to the showerhead.

Installing a zmіshuvacha on the wall near the bathroom kіmnati

The design of the larger zmishuvach is composed of the following elements:

cases;
sidewalls;
bushings;
union nuts;
rukomy cone;
laying;
vilivu;
pipes, what to supply or flexible hoses.

Today, on the shelves of stores, you can see three types of zmishuvachiv:

single;
thermostatic;
double-guintile.

Models with one swivel handle have recently become very wide. Some of the older generations call them articulated, mono-command and navit joysticks. Construction with one rotary handle and two polymeric spheres with an opening between them. You can regulate the amount of confusion by setting the necessary flow intensity. On this device, be it possible to win with one hand, and in this yogo there is no trouble over the double-ventilated bowl. In addition, for the help of one important person, it takes a fraction of a second to block the water flow. Zavdyaki easiness to the course of the handle is uncontrollable tekty is completely turned off. It is a reasonable price to often use yoga as an alternative to a double faucet.

Installing a bath zmіshuvacha

With the help of thermostats, it is possible to ensure the supply of water at the set temperature. The stinks of the stench are guessing two screw fittings. Thermostats are equipped with a pair of handles that control the water flow: one controls the temperature, the other controls the pressure of the water. Deyakі models of thermostat mayut button on the body, pushing yakoї you can turn on the economy mode. When working in this mode, the attachment is between the drive. Repeatedly pressing the button will turn on the economy mode. It's too expensive to patch thermostats.

The double-winding faucet is a classic of plumbing, it will drink on a new troch, dropping after models with one rotary handle appear on the market. The design of double-screwed virobs, or so-called yalinkas, is a pair of crane-boxes, placed on two sides of the hull. Skin valves regulate the supply of cold or hot water, as well as pressure and heating. In some models, the crane bushings are reinforced with a gum gasket, in others - with a ceramic disc.

Yake roztashuvannya faucet at the bathroom vіdpovidaє standard

Before that, how to proceed to practical recommendations about how to install in the water-removing fittings, let's get to know some of the best practices and it’s clear, at a high height, install a zmishuvach over the bathtub during installation, which follows all the rules. Why can you visit BNiP. For all details, see BNiP 3.05.01-85. According to the standard, the crane above the bathing tub must be at a height of at least 25 cm and at a height of 80 cm above the equal footing. With a little understanding of the normative documents, it becomes clear that in the fall and the month of the installation, the recommended values of the parameters of the height can be changed, for example, in medical installations, the height of the change in bathrooms is standard 110 cm, and in the case of summation, the shower capacity is 12 cm.

Zmishuvach for a bath - fixed to the wall

When organizing the distribution of water supply to the house and the apartment, the standards and sanitary norms and rules are not the same already. For example, for example, installation of a faucet at the bathroom with your own hands by a home wise man, you will be helped, first for everything, dotrimuvatsya vkazivok vrobnik, included in the instructions for the installation of vrob.

The appointment of a zmіshuvacha becomes an important landmark

Vyrobniki today produce various water-collecting accessories, which can be mounted there, de stinks are necessary. Significantly, it may be that the height of the zmishuvach over the bathroom is necessary for the improvement of the place of yoga recognition and recognition. So, if a faucet is mounted on the wall, it is used only for filling the bathtub with water, it is recommended to close it at a height of 20 cm from the top side.

If you transfer water from the faucet to vicorist, not only for filling the bathing tank, but also for supplying it to the washbasin, then it is recommended to close the plumbing fixture on the wall on the wall 25 cm from the sink and, if necessary, for the installation of the bathroom.

How to truly expand the height of the zmishuvach installation

The height of the installation of the zm_shuvacha at the bathtub corresponds to the recommended standards for the placement of water fittings in this area. Ringing up to the point where the faucet is fixed, it is calculated from the opening of 20 cm, laid down according to the standard. Prote suvore dotrimannya norms rozashuvannya data priladіv really not practiced. You can install a faucet in that place, where you like it, ale first, lower the rest of the yogo, follow it without fail to reconcile according to height and evaluate it, you will be handy for it.

Installing a sub-logic zmishuvach near the bath

If there is a need for a sump for a bath with a shower, then it depends on the height of the installation, it needs to be repaired from 120 cm, and moreover, it needs to freeze to see the bottom of the tank. Deyakі domіltsі, counting, as a result of the height of the installation of the zmіshuvacha over the bathtub, they often have mercy, take the shards from the motherfuckers, the height of the bowl that has not yet been installed. This is not the case, because in the process of installation it is often necessary to add a support (the width can be 8-10 cm). Adzhe yakscho not bezbezpechiti uhil, then angering the driver will be difficult. And it may happen that you have given a value that is more than 20 cm after the completion of all the work, it will change to 10 cm. Like a "hanging" tap over the bowl, it will not look aesthetically pleasing, it will be unhandy for it. Until then, some of the models are so low, just don’t get stuck.

Freeze that zazdalegіd razrahuvat the need for more significance of such a show, as if you were standing in the hood of the bowl to the point of fixing the water outlet. It’s necessary to work, as if transferring water to the offending sanitary facilities, turning, turning in the right direction. І vrahuyte, that the shell is already stashed more, on the vіdstanі 85 cm vіd podlogi. To the value of this indicator, it is necessary to add the value of the attachment itself, that sprat of centimeters for the free passage of a goose over the sink. Wait, pardon in plus will not be dramatic, lower in minus.

Subdial zmishuvach for bath

The space for roztashuvannya of the water intake point is also stale due to the presence of additional accessories, which are often used to equip modern plumbing fixtures, for example, to help water. In addition, thinking about those, how to install a faucet at the bathrooms, it is necessary to protect all the fears of future coristuvachiv. Deko wants to see the faucet rotting more, to show up the ability to take a head, not to put a shower and not to remind you of a bathing place. The others, however, should be, if there is a water socket, the yakomoga is lower than the water, the more the noise and the breeze in the air. First of all, obviously, it calls out their discomfort. You can’t make the soul compress with that trick, even if you can sew a long hose for the next person.

When you install an attachment on a lined wall near the bathroom, try not to stick it to the tiles, but rather to the curbs. It is very important to get a strong connection from a tap to a short covering. Therefore, choose the place for roztashuvannya sanitary ware following the fixing of the curb laid on the wall (sound yogo is laid per meter from the logs). Sob the decorative cup completely closed the connection area, the entrance fittings were built into the wall, and their ends were flush with the front surface of the tile.

Roblochs of independent supply of water mains to a water outlet must be protected in such moments:

Between the inlet fittings of cold and hot water, the shoes may be 150 mm wide, then the pipes do not heat up and cool down one by one.
Call the right-hander when it is cold, make it shy, and left-hander when it is hot.

The faucet, which is transferred to be installed on the side of the bіchnі part of the bathtub, is more likely not in the middle, but closer to the zlivu, there it will be more convenient to get water for an hour to receive water procedures.

Under the hour of vykonanny robіt obov'yazkovo koristaytes budіvelny equal. Given modern instruments, sound may be added to the visual scale of the line on the other side. For additional help, you can install whether water outlets are needed on the axles you choose.

Installing the zmіshuvacha on board the bath

The simplest thing to do is to install a temporary fitting, before that, you can secure a strong sweat, the winds of which can be filled with water in a short hour. Today's designer bath bowls have a technological opening for twisting them. Navіt for yogo vіdsutnostі to drill vibrіb not in a hard warehouse.

Sub-logic zm_shuvach for a bath Installation of a zm_shuvach on a bathtub Installation of a zm_shuvach on a bathtub