We replace the eccentric for zmishuvachiv

When you use the word "eccentric" for zmishuvachіv kozhen, it is understood that this is the case, obviously, plumbing. I know the word well, but what it means is unreasonable. In the article, let's figure out what it is, it's necessary and how to practice with it.

what

Well, the word "eccentric" is deciphered as "posture" and "center" - "posture by the center", or "displacement center".

An eccentric for zmіshuvachіv - attaching, in fact, an adapter to a crane or navpak. This is a transitional piece, which has a wide and wide threaded part, the size is one to one. Yogo rosemir to become 3/4 x 1/2 (15 x 20 mm). The standard distance between the inlet openings of the pipes is 150 mm.

Newly needed eccentric

The assortment of zmіshuvachіv on this day is more varied. The leather has its own technical parameters, which are modified by constructive features, with a good look and feel between the nozzles. Often blamed deyakі skladnoschі z yogo fastenings і rozbіzhnistyu stikovyh otvorіv. The І axis in such swings comes to the aid of an eccentric for zmіshuvachіv.

The installation of eccentrics for zmіshuvacha transferring twisting one edge with a narrow and ovnіshnіm rіzblennyam without a middle at the water pipe, so that the water pipe, and the other end with the internal rіzblennyam to serve for fastening to the new one of the branch pipes of the plumbing extension. Deyakі vidi eccentrics for zmіshuvacha are made from brass or bronze. As pipes are made of plastic, there is no difference, for any material the eccentric is made, and the axis, when screwed into metal water, the eccentric is due to the same metal, in this case stainless steel. In this way, the same pressure is secured in the middle of the pipe and the temperature expansion, which automatically reduces the flow of water.

Rosemary eccentrics

According to the sanitary standards, the distance between the eccentric between the entrance openings of the water pipes is 150 mm. If the parameter is different, it is enough to turn the eccentric for the shifter by simply turning the adapter along the axis to the required position, reaching the best result. For the help of such a method, it is possible to install whether it is a type of rozmіru zmіshuvach on trumpets installed according to the standards and navіt independently from their introduction. Ale є small obezhennya - vіdstan mіzh kіntsami pipes.

If the opening in the tiles is smaller, the lower is standard, it is necessary to expand it, or you can buy eccentrics for lowering the size. The main dimensions of the shoulder in the center of the eccentric are 40 mm, 60 mm and 80 mm. Not only that, but the stinks are brimming with rosemary, and yet with a form that is more comfortable to the shoulder, the tim are more likely to be bred by their kinci. Most often, when buying a zmishuvach, eccentrics are already included in the plumbing fixture kit. Ale, perhaps, the dozhina of transitions is not suitable, and it is often necessary to bathe them well.

How to install yourself

The most common installation of the adapter is to enter at the binding, but it is also necessary for the independent installation. This process can be divided into two stages:

• installation of eccentrics;
• installation of adapters on the zmishuvach.

We had to reconsider that access to the supply of water was blocked. I give a guarantee that in that case, as if it were not so, judges from below will not suffer.

In order to perekonatisya in a new set of virobu, it is necessary to select a design that does not block the damage, turn over all the knots for peroxide, which are included in the threaded z'ednannyah. Chi all the details are behind, chi is not clear about the zayvogo chi navpaki.

Another stage of the work is the connection through eccentrics for the shifter, which you need to look at further with other components. The eccentrics are made up of two parts - wide and narrow cut. A linen is wrapped around a thin linen of shoes, or a winding. Winding is necessary for the year's arrow, so that the winding does not collapse under the hour of twisting the viroba. A silicone sealant paste is applied to the line thread. You can also go back to the old way of winding thread, for which oil farba is used. Having completed the installation of eccentrics, obov'yazkovo perekonayetsya in that, chi dotrimani mizhosovі rozmіri. For the help of a horizontal line, reverse the position of the eccentrics, like a ruffle in the center. The stench can perebuvat at zero for equal. As soon as an hour of work is carried out, with the installed eccentrics of the zmishuvach, it will appear that the shoulder of the adapter’s shoulder is not enough, then it is necessary to add a larger one.

For a neat prikrittya, having opened the pipes of the vicorist, the decorative vіdbivachі.
At the final stage, a zmishuvach is installed.

About what next memory

• Before the cob, it is necessary to change over at the re-equipment of the crane. Review the defects and details of those reconciliations.
• Perekonatisya at vіdpovіdnostі to razmіrіv eccentric.
• Remember that the linen or the insulator needs to be winded up only for straight cutting.
• Perevirity schіlnіst that nadіynіst zakrіplennya teplyuvacha. Vin is not guilty of scrolling at once from the cracks.
• Obov'yazkovo vikoristannya oiled over the lyon. The recommended option is a sealant on silicone or olive oil.
• On the back of the eccentric, it is necessary to bait manually, then we will zastosuvat the key.

Final visnovok

With all the stats, it is possible to make visnovoks, which cannot be installed without zastosuvanya eccentrics. The installation process does not need any new skills, so you can work on your own. Golovnya - choose the right type of eccentrics for the zmishuvach, fix the stitch-enhancement, install silicone, gum and kapron gaskets. Also, you need to take care of the correct installation of the zmishuvach, which can be changed in the zero horizontal position. Laying all the stages of re-checking the knots on the water flow. At times, you need your pijati. If you need to follow the instructions and vikonati all the more important things, then everything will be done the first time.