Do-it-yourself wooden visor over the door. How to build visors over the entrance doors with your own hands

At home, you will become a defender in front of different types of falling, stop falling snow on your head, and you can not put a parasol in a booth, it’s not so handy. Also, we will be adding to the outrageous architectural design, reinforcing the individuality. It’s easy to build it yourself, whether it’s a construction under the strength of a person with a minimum allowance of carpenters and plumbing workers. It is only necessary to stock up on a set of tools, and following the instructions, you can quickly get into the set tasks.

Technical information

The plan of functionality overwhelms two factors:

• Decorative;
• Zahisniy.

In order to satisfy the offending needs, the overhead structure was divided into two parts of the frame and curved. The frame looks like a frame, most of the screws are made of metal profiles or pipes.

Visors are also classified according to the method of installation on the wall:

• Pіdvіsnі;
• Support.

In the first variant, the center of the vag construction, squarely wooden vіn chi nі, sit stovpi, like concreted near the ground. For the other - to creak without interruption to the wall. It is advisable to recommend working from a tree, so that the stench of the boulevards is light and does not create an additional predilection for the wall. to show off a great mass, to cover it for a new one, be it. At this time, you can create a work of decorative railings on fire, you can choose all design solutions.

Visor shape

The visor on the entrance door can be of two kinds. It is more common to shy one-shil, the upper edge rests against the wall, and the lower one hangs over the threshold. Such a trick is needed, so that the snig did not add up to the daha and the tightness did not make the pressure on the daha. Such a visor is also equipped with a drain, so that water does not pour on the threshold.

Dvoskhili visors can be milked often. The design is not too foldable for one-handedness, it’s just prepared for more work. Having offended the skins of the dahi, they were healed to the side edges of the gank, looking like such a design as an arch. This type of hanging is more practical, it protects the sides from the sides. And it’s not so easy to put it in the windows, and you can just look negligently in deaky booths.

Wimogi before construction

The visor above the entrance is clumsy, but at the same time it is guilty of conforming to the singing standards. The width of the overhang may be buti at the second time. In such a rite to go out, to appear covered from the sides of the mouth in the fall and strong blows in the wind. The visor can be zhorstky, vitrimuvati mean vag and vice. So that the mass of the snow, which accumulates, does not crush the metal, the skin thickness can be no more than 20 degrees.

The exterior plan also has some nuances that need to be trimmed. Kozirok is not guilty of going out for a wild look of life, so as not to call the houses. Therefore, vidi kozirk_v ​​is necessary to choose a relatively, obmirkovuyuchi skin factor.

Wooden construction

Hovering over the entrance doors from a tree look even more aesthetically pleasing, more relevant for compact houses, as if inspired by chains or a tree. When it’s bazhano, sob dah bov povnistyu derev'yanim, then the wild aestheticism will not collapse. If you do everything yourself, then you can’t overestimate two or three thousand rubles, it’s worth it small amount, yak pіd force be - yakomu . In order to become a gank, we need the following tool:

1. Wood saw;
2. Chisels;
3. Drill;
4. Number of twists;
5. Bolt bolts;
6. Bar.

The material is chosen depending on the specific rozmіrіv budіvlі, schob stachilo vіdrazu and did not have a chance to travel and dokupovuvati.

We need a beam to build a frame and a support for the wall. The frame may be square, but the structure that is fastened to the wall is tricot. The frame of the beast is sheathed with boards, we put it in one to one, so that there were no gaps between them. In such a rank, we have a successful resolution.

The tastika tree can be filled with resin, or better sheathed with roofing material, so that the water does not scatter on it. The defense of the vіd vologa becomes the virishal of the plan for the longevity of the dahu. Dopomogti in tsomu can be dressed with varnish and special water-drying bags. If you don’t work it out, then the material above the entrance at the houses of the komakhi and the post-yna vologa should be easily brought to the unapproachable. On top of the frame, covering materials are fastened, then there is a vicarious mustache, which is always good:

• Slate;
• Prof. flooring;
• Gnuchka tile;
• Metal tiles.

Creep to the doshok with screws and humic washers, so that through the opening the water does not sip the snow.

Visor with metal

With a door with your own hands, you can only open the door with metal. The lintels of the hangings are embellished with carved elements, sometimes forged. Deyaki specimens, like kindly broken ones, look like aesthetic, lower wood. Behind the shape of the visor, you can work it out, be it, lay everything in the vіd vіd vіd vazhnya vlasnik and umіn zvaryuvalnik, which is a design vikonuvatim. However, if you want to create an ideal arch, bend metal, but it’s not so easy.

Vikonannya designs

The basis for the construction is a steel coil or channel. Tovshchina metal is guilty of vibiratsya vykhodyachi z rozmіru frame that peredbachuvana navantazhennya, like hanging over the entrance maє vitrimati. On top of the structure, sheet metal is welded, the tovshchina is guilty, but not less than one tenth of a millimeter. The frame will play the role of stiffness ribs, the police side or the channel bar should be no less than 1.5 mm thick, then it will become more comfortable. At this stage, forged elements are welded in order to embellish the navіs.

The plan of labor is more complicated with a zvarny visor, so that one person does not succeed in such a task. We prepare the construction to be brought to the ground, and then we will lift it up. And there, on the heights, there will be a victorious brewing, so that you can securely fasten the overhang over the door. People, who have little luck at such visits, it’s important to call on helpers.

Hanging installation

Hang over to put on a support, to that without them there is too much pressure on the wall. For the skin support, the work of the Sverdloviny was brought about, so that the staves were fixed superficially. The depth of the Sverdlovin is at least a second meter, as a support it is ideal to blow the trumpet. The inserted pipes need to be poured with concrete, and the dates need to be caught for three dobi. The entrance group of the frame is fastened on one side to the wall, and on the other side it spirals onto the posts.

Everything depends on such a plan:

1. We fasten the frame to the wall with anchor bolts;
2. We weld the next rush to the stands;
3. Farbuyemo zalizo, robimo anticorrosive processing;
4. We will cover it.

Farbі happens to be allowed to dry up, so such a robot takes a singing hour.

Protect the visors over the entrance doors under the strength of the skin, but when you need it, be careful and careful. you need to choose the right entrance, try not to let the kidnapping happen - you should not be listed on the final result. Before preparations, it is better to christen the armchair, to show the bazhany rosemary, so let yourself be spared a lot of pardons in the process of preparing the installation of the structure on the wall.

Entrance doors are the head element of the facade, so you need to take care of the visor. Vіn is guilty of nadіyno to protect the gank from falling. And also mother garniy zovnіshnіy looking.

Visor over entrance doors

The diversity of constructions and expansion

Hanging on the entrance doors can have different functions and power. The visors of small roses are vikorated for a comfortable entry to the booth and protect the gank from the most negative factors. The constructions are bigger, they protrude like a small gazebo or a terrace. You can see the grandeur of life from the entrance doors and to the heart. Most often, such a design is victorious for parking a car.

The design of the overhang can be:

Choosing the size of the visor, varto orienting on the dimensions of the gank. The navіs can only curl the entrance design, or the whole gank will be blown. Just to reach the standards, the Maidanchik is guilty of buti glib, the lower doors themselves in the second time.

With a strong board, water can flood the doors. In this direction, the vryatu navis is 30-40 cm larger from the skin side of the entrance. For the correct design of the visor, varto vrakhovuvat regional peculiarities of the weather and windy mind.

Materials for the framework of kozirkіv

The hovering over the entrance doors is due to the style of the facade and the hank. For the frame of the visor, mainly vicorist metal and wood, and other concrete steps.

Wooden visors

Yakshcho budinok preparations s wooden beam, this type of hanging will be the best option. Vіn pіdkorіt its beauty, well, such material is environmentally friendly.

Wooden visor

For the installation of a frame of a small overhang, a bar with a span of 40-60 mm is to be used, and an axis for a larger crochet, it is necessary to fix a width of 100-150 mm. Such a visor can always be embellished with unusual patterns, or varnished with a desired color.

Visor with cuts

For tree trimming, you don’t need special tools, but special skills. Ale varto vrahuvati, that this material is very strong to the point dovkilla, like a goddamn construction

In order to continue the term of life of a wooden viroba, it should be regularly processed with special antiseptic methods, as you can come to any emergency store. It is also a guide for improving moisture resistance and water resistance.

Tree trimming to improve water resistance

Metal hangings

Navis from metal is the most demanded virob for today. Use this yoga, see that form vikonannya:

Metalevy navis will become a miraculous zahist of the entrance doors of a private booth or a bulky booth.

Other vidi navіsіv

There are not only wooden or metal visors, but also stationary or hanging models made of aluminum or plastic. For the great budins, sometimes they beat the great pribudov, as if trimmed on the ground or concrete stovpah.

Visuvny visor

Coating materials

The visors above the entrance doors are mostly made of polycarbonate. This material is light, easy to install and durable. Great choice allowing you to choose the panel with the necessary transparency and favorite color. Such a construction looks far away on the sleepy side of the mule in the darkness.

Visor from polycarbonate

Another type of coating is a construction from a galvanized sheet or profiled sheet. She looks beautiful and cheap. The color assortment allows you to add leaves for hanging, which is suitable for the color of the house. Galvanized steel burns for hours on the sun and often suffers from corrosion.

Cap from corrugated board

The metal tile is also becoming popular. Її zastosovuyt for wood and metal frames. Shchab insert m'yaku cover need sucilna reshetuvannya vlogostiykoї plywood.

Kozirok from metal tiles

For a summer cottage, a visor can be covered with slate, roofing felt, or covered with straw. Tilki varto vrakhovuvat stylistics of the whole court and life.

Kamishovo-straw visor, which suits the style of Dahu Budinka

See the hanging over the entrance doors

Do-it-yourself metal frame installation

The frame of the visor is a load-bearing structure, on a yak lagatim covering. The frame can be buti mіtsnim, it is better to make it from metal.

For robots you need:

• metal profile made of peretina 25x25 mm;
• material for covering;
• priming warehouse for metal;
• farba, stіyka to vologa;
• self-tapping anchors;
• grinder and hacksaw for metal;
• zvaryuvalny apparatus;
• electrodrill;
• penzlik for farbuvannya;
• respirator, gloves

Sequence of work

Do-it-yourself installation of a canopy made of polycarbonate. A photo

The first step is to proceed to the folding of the visor, it is necessary to build an armchair structure. Polycarbonate is a material that is good to bend, but the degree of the virgin is not guilty of overhanging 70 cm.

For robots, you need the following tools and materials:

• polycarbonate sheet;
• metal profile for the frame;
• roofing materials - self-tapping screws, screws, dowels;
• grinder and screwdriver;
• electrodrill;
• Vimiryuvalni tools.

Sequence of work

Yak robiti visors over entrance doors: design diversity and expansion, installation metal frame, do-it-yourself installation of hanging from polycarbonate, photo

Do-it-yourself visors over the gank Do-it-yourself forged visor from polycarbonate Navis from polycarbonate with your own hands: what do the nobility of newcomers need? How to hang around, come to private zamіskom booth with your own hands How to build a visor with an overhang over a gank with your own hands Forged visor from polycarbonate: how to make it with your own hands How to grow hung over a polycarbonate gank with your own hands Visors and hanging over the entrance: 6 forms and faceless variations

The visor has two main functions: decorative and zahisnu. By supplementing the facade with a similar element, you can significantly improve the aesthetics of the whole house, create an exclusive exterior and give your life a unique style. Alece is not the main function of the visor. Nasamnist the presence of this virus protects the area in front of the entrance doors and the doors themselves from the negative influx of atmospheric inflows. To that door, above which there is a hovering, saving its operational capacity for more than a trivaly hour.

You can designate the following to the visor over the door:

1. This element is responsible for the protection of the nadіyny protection from falling.
2. Sob kozirok all over the world, vykonuvav tsyu funktsiyu, vіn can act for the ganok on pіvmetra and more.
3. In the region it is important to navіs mav suffice mіtsnіst and stіykіst to windy and snowy adventures.
4. Also, you can harmonize with the wild style of the booth.

Choice of material for construction

1. For a successful choice of material for a visor, a little bit comes out of the outer look of the facade part of the bud and cover. For example, for a cellar booth It will be most successful to look at the navіs, chiming on the whole supports. And so that there was no contrast between with a sultry look the booth itself and the visor, which can be covered with a vikonan from a similar material.
2. Also, the process of choosing the material should protect the power of the syrovin. The matte or clear-cut was thin, and also covering on a plastic basis is enough to protect only a few of the boards. In order to create protection from the wind, which should be in the presence of a strong wind and significant blows in the snow, a more suitable choice will be covering from a tile or a steel sheet.
3. IN Rest hour a wide zastosuvannya for an hour of making a visor with your own hands by removing polycarbonate. The demand for this material is explained by the low positive power, which may be:

• ease of operation - screeds, vikonans from polycarbonate, do not require regular inspection;
• it is easy to finish with this material;
• ready-made visor will mother high stіykіst to rіznyh mekhanіchnyh vplivіv;
• the high indicator of the plasticity of this material allows you to put on a viroba, which is being prepared, be it a bazhan shape.

For obvious reasons, the price of polycarbonate is not too high and is available for a wide range of people. There are two types of polycarbonate:

• monolithic;
• style.

Stilnikovy polycarbonate is a sheet, z'ednani in two balls between which are known to be later ruffled jumpers. Polycarbonate of monolithic type visually exudes yogo wine quality. The leaves behind their visual signs predict the slope, but they show the promise up to 200 times more.

Variety of kozirkiv

The visors are subdivided into types according to two criteria - according to the method of fixing that form. For the first criterion, they distinguish:

• supporting visors (at times, the fixed structures vibrate on the feet, as if they vibrate the function of the support);
• hung fastened on the wall.

Canopies of the supporting type show more tension, lower suspended structures. So is the use of sprat forms of kozirkiv. You can use:

• arched structures;
• tent awnings;
• single scale virobi;
• double construction.

Do-it-yourself kozirok, photo:

Sporudzhennya odnoshelim navіsu

The visor of this type is distinguished by its insignificant vag and ease of installation. For the preparation of pidide as fastening on a support, so is a suspended method. Choose metal or wood for making this type of construction. The order of attacks:

1. On the back it is necessary to designate the width of the gank and add 30 cm to the skin side to the first indicator. Withdrawal data will be based on the width of the possible visor. In order to determine the height of the viroba, it is necessary to carry out rozrahunka, focusing on the design of the booth. Virib may buti raztashovaniya pіd kutom 20 ° and more.
2. On the basis of otrimanih pokaznikіv eskіz is formed, in which case the dozhina is shown.
3. They gave the vicarious material the need to make blood, rozmіr of some indicative evidence of the slope's life. It is also vikonuemo a beam and a p_dkosi.
4. Storing all warehouses into a single structure to lay down according to the type of material. When using wood, the frame needs to be taken on screws, and for metal work, it is necessary to fix the zvaryuvannya.
5. At the offensive stage, it is necessary to attach a visconate to the already finished frame over the gank. Beams are fastened behind additional screws from a stainless steel warehouse, and fastened behind additional anchors.
6. After that, it is necessary to install the installation of the sheathing on the roof system. As a material for the sheathing, there are bars or boards. The slats need to be laid in the fallow in the material, which is victorious when covered. As if the metal leaves or slate, the rotting of the slats is guilty through the skin 40 cm.
7. At the final stage, lay a cover on the roofing system. Roblyachi kozirok over the gank with their own hands, it is necessary to protect yoga from the atmospheric infusion. For which two strips are mounted. One of them is to be reinforced to the wall of the upper fragment of the schila, and the other is to adjoin to the lower sloping part.

1. After which you can install a trough. Also, follow the vrakhovuvati that nuance, which is how to wake up, on which the installation of the visor is carried out, I am carrying a wall. And in quiet places, where mowing and beams pass, it is necessary to seal them. Tse dopomozhe niknuti get wet ball of insulation.

Do-it-yourself do-it-yourself visor over the door

The visor of this type is considered to be foldable viscons, but with better functionality. Such a design protects the wood from the wind more quickly, and it is easier to clean the snow from it, from the bottom with a single-skinned visor. For yoga, you need to do the following:

1. The parameters of the virobu are the same as when installing the visor of one-schily form. So next, focusing on the structure of the building, open up the walls of the brackets. And, vrakhovuchi showing the height and width of the visor, it is necessary to determine the parameters of the blood system.
2. Further, as we are transferring the preparation of a suspended structure, it is necessary to prepare two brackets from a wooden or metal material.
3. Two beams should be creaked one to the other perpendicularly, after which you should join for an additional mowing. With this, it is important to trim the kuta 45-60 °.
4. If it is necessary to fasten the brackets to the wall, if there is space to reach, between them it is to blame for the width of the future visor.
5. Vertical beams should be added to the wall. Vikoristovuyuchi rіven, stave it in the necessary order, and then fasten it with stainless screws.
6. For the preparation of the supporting visor, it is necessary to install steps from wood and metal materials. On the back of the head, it is necessary to excavate, give a pillow, laying a ball on the bottom of the chants. On top of this ball, lay the ball with crushed stone, install steps and fill it with a concrete warehouse. The upper parts of such supports run behind the support of load-bearing beams.
7. Let's make two pari krokv, like creaking crossbars. The roofs are fastened on the upper beams, after which the ridge beam is mounted.
8. Then a grating is installed on the crucible, on top of which a covering ball is laid.
9. At the end, we mount the cornice bar and trough.

Arched construction

The technology for preparing such a visor is the simplest among the methods:

1. After vykonannya vimiryuvan parametrіv gank roble eskіz and determine what kind of rozmіru can be buti frame. The target element is easy to finish. As a material, it is necessary to prepare two pipes from aluminum material, they need to be bent in such a way that two arcs are seen.
2. Dalі ts_ arcs are needed z'єdnati z both kіntsіv, vikoristovyuchi at tsomu direct vіrіzki а similar pipe. For the bazhannya, you can build up the construction of a thicker one by welding a beam to it.
3. If it is necessary to weld the hangings to the arc, which is known to the back, it will be necessary for the help to attach the visor to the wall.
4. After completion, the frame is covered with farboi.
5. After hanging the installation of the structure to the wall for additional screws.
6. Do-it-yourself visor over the entrance .

Visnovok

Kozirok є important element exterior booth. Yogo nayavnіst priyaє zakhistu vkhіdnih doors vіd opadіv і as a result of zbіlshennya її її termіnі service. Today, there are a few different varieties of caps and a sufficient variety of materials for yoga preparation. Tse give the opportunity to choose Danish element pіd style be-such a booth. Installation of the structure is easy to do. To go back to these tasks, it’s enough to get acquainted with the description of the technological process.

Do-it-yourself visor from polycarbonate. Video