Gvintov go to the dachas of the other on top. Gvintov descend with your own hands. Yak vibrati, build a chair and install it

Gvintovі, napіvgvintovі and krugovі vіdnosjatsya until turning descents. They look even more pleasant and give themselves to designer looks. And yet, their installation is often dictated by the need to make it possible to go to a small square so that you can successfully enter the first one on top of the other one. Although through the architectural features of a private booth it is problematic to make straight marches, then think over one of the turning options.

Gvintogo go

Regardless of the hostile look, the twins are seen to the most handy and the most safe kind of convergence:

Ale, if there is no other way to get the upper opening and going on the bottom slabs on top, then the twins will become the most acceptable.

The slabs of spiral descents can creep up to the central stovp or spiral on the bends of the fence. The remaining version is miraculous and looks even thinner, but too foldable at the viconan, and the design takes up much more space, lower at the first drop. If you want to go to a private booth on your own, it’s easier for you to go to the central stovp.

To make it comfortable, for gatherings, rotting close to the walls and kutіv, placing the first on top, choose the most handy straight spiral for the year's arrow, or against. Roblyachi rozrahunki, often forget about the handrails, as if in the course of time they do not fit in the opening and vrіzayutsya, close to the ruffled walls. To the cob, the varto transfers the features of the design, vrakhovuyuchi, that the hand is guilty of freely hoisting the railing, and the length of the steps is much shorter than the transfer through the same railing and supporting stovp:

If two meters in diameter are designed, then the opening is to be 2.20 × 2.20 m.

Roztashuvannya supports are chosen strictly in the center of the upper opening behind the help of the schema. Be wooden or metal, persh for everything, close the shear stalk from the casing pipe. For whom they sporadzhuyut an utrimuyuyuchy vuzol - p'yatu, from a sleeve welded to it. The sleeve is rolled from a pipe of a larger diameter, where the support is welded. Give it maximum durability.

The vuzol is installed in two ways: on the elements of the overlap of the bottom on top and directly on the finished pad, so it’s impossible to pick up the top of the pad:

1. Strengthening to the cross - the most reliable and stable method. The legs are prepared from the channel at the sight of the chrest, yak to concrete slabs, open the chrest with a drilled hole, attach with dowels. Monolithic concrete screeds P'yatu can be drowned, pid the hour of pouring cement. On the wooden crossbars, the crossbar is drilled in such a way that the gang of descents of the bula is transferred to two or three beams.
2. For fastening to the surface of the ready-made pads, a round flange-flange is used, in which the sleeve is welded under the support. The flange is installed in such a way that the dowels are fastened to the crest under the log until the overlap. Such a way of imagining the binding of the tongue fixation of the upper part of the shear support to the overlap of the upper top.

The top of the stalk ends with cracks, for the mufti, which is wound up, or an obtisk pipe, so as to secure the slabs unruly.

Wooden twine go with your own hands

Obov'yazkova umova: it is necessary to practice only with dry wood. Otherwise, after a few months, drying out material, "lead" in different directions which will lead to distortions, cracks, ruins. These are the reasons for the failures, which do not wash the metal support, do not look out of a solid board, but only from adhesive materials.

Preparations for coming off are cut from a planed beam, which is smeared with glue and pressed into a single flat package with clamps until it hangs completely. At this beam, there are those straight lines in the villages of fibers, which went alternately at the opposite straight lines. Behind the help of the thin pattern, the outlines of the slabs are sharpened, and the sawing of the distant grinding of details is improved. Open the outer part of the wide part for support, especially precisely at the skin fold.

Tse tі elements, yakі it is impossible to correct. The opening for the casing pipe is drilled with a special cutter. Let's make room for the railings. After the change, the tovshchina step is not guilty of the lesser one:

• 50 mm at exits with a diameter of up to two meters;
• 60 mm for exits with a diameter of up to three meters.

The casing pipe for the shear support should be taken with a diameter of 50-70 mm. The height of the gatherings is fixed by the support sleeves. For them, a pipe with such an internal diameter is needed so that the support enters the sleeves in the back, without obscuring the visible gap. Otherwise, the centering and stability of the structure will collapse.

So that after the obtisk during operation, the wood did not shrink and did not split, and the sash became schіlny and mіtsnim, the slabs from the upper and lower sides are laid between the sleeves with regulating washers. They are twisted from metal on the bench.

For washers, plumbing flanges are also miraculously built. Zovnishne ozdoblennya sleeves and washers are carried out to the cob of folding. They are often glued with veneer or material for wood, it can also be stuffed, nickel-plated, chrome-plated with a front primer.

The upper baluster railing of the camp obtisk pipe with carvings at the lower її part. Fight in two ways:

• the cutting is applied from the inner side, as if the obtisk pipe is taken like that for sleeves;
• if the pipe is victorious in such a way, as for a support, the cutting is applied from the outer side and is closed with a stable plumbing coupling.

The top of the descent is hard to fasten through the upper slab-maydanchik, which you know at the crossroads.

First of all, go down the rest of the way, carry out black folds, revealing and usuvayuchi nedolіki. The lower sleeve is strung on the support, which can be expanded into others, then the washer, steps, washer, sleeve, and so to the very top, ending with an obtisk pipe. The saplings are bursting on necessary. The handrails reconcile, but they don’t add to the burden. After the selection of the descents, the finishing of the improvement of all the parts, after which the descents are selected, is carried out. The handrails are mounted to the fully installed and fixed structure.

Vibuduvati correctly twine get off the tree with bending handrails, smoothly wind fakhіvtsyu. The durability of the structure should be deposited not only in the light of the master, but also in the quality of the material. The simplest, economical and bezvіdmovny way - get off the wood on a metal frame.

Metal twine go economy class

Vaughn follows the same principle as a tree. Mustache metal parts are fastened to zvaryuvannyam or bolts.

So go down a quarter, half, or two quarters of a turn of the spiral. The stench is less exhausting and unsafe, lower screwed. To build structures mainly, as a continuation of the descent from direct marches:

• to save money;
• manually exiting the other over;
• for distant gatherings with the upper opening.

The design of the napіvgvintovyh descents as a whole zbіgaєtsya with the zvіvtovy pristroєm. Ale dozhina the first lower sleeve is of a higher height, on which the first foot step is installed. The central support also needs to be ripped in the center of the upper opening. Direct gatherings can go straight to the zabіzhn, otherwise the maidanchik will fight between them.

These are the best, the most subtle, the most foldable in rosrachunks and constructive descents, in some vikoristan elements of trivum curvature. Mustache steps, but the center of the stake is significantly far away, lower at the spiral descents.

The smallest inaccuracy is unacceptable for such a construction. Shards of self-sustaining rozrahunok and chairs of circular gatherings are not easy, to be handled by the AutoCAD program.

Prepared for the construction of a circular drabini koshtuє zavzhd is an order of magnitude more expensive for others.

In domestic minds, such a construction of vikonati is impossible. Von vmagaє vysoko professionalіzmu that knowledge of the joiner's master, special possession, great area for preparation, great material windows.

To build similar ones, descend on two pulls from a bent glued wood, as if they were climbing on straight lines: uphill and on a stake. For this purpose, two conductor-drums from the bars are designed, for the outer one and the inner pull. The drums are inserted one by one, vimiryuyuchi accuracy vіdstanі, s-pomіzh them. Gluing together ball after ball of smuga veneer, fasten them with clamps to conductors and step by step create a spiral shape. The parallelism of the deaths between the outer and inner pulls is constantly vibrating; Namensha pardon brought to the skewed shablіv. The process is a copy and requires absolute accuracy. Behind the help of the drum for the callous tativi, the handrail of the railing is folded. The chapels in the ready tativi vrіzayut just like at the great gatherings.

It is impossible to bend metal rods or kosouri with your own hands. Narizati and zvaryuvati under kutami at three straight lines of tee beams, channel bars or profile pipes are also not the best wind. The smallest inaccuracy was brought up before all the gatherings were completed. In addition, the structure can significantly vibrate, and additional lower supports will be required, as if to fix the outer appearance of the structure. You can carry a load or kosouri zamovit, and chabli work independently. If you want to try to create circles on your own, it’s a task for right enthusiasts.

Armchairs, diagrams, dimensions (width), photographs, price and layout online open for 2 over

Schemes and armchairs of straight, twisted turning descents, rozmіr descents and descent openings, as well as showing the material or variance can be taken without cost for online programs on the Internet. This is important, not only if you go and construct with your hands, but for the mind, the prayer of all works. Nasampered, behind the unidentified photographs on the Internet, they are listed as the configuration and material of the upcoming gatherings. To the cob it is necessary to calculate the parameters of the design, and for which you need to know the exact dimensions, with which the program will be practiced.

The number and dimensions of the stones, from the designations of their height, depth, height of the steps, the size of the step and the tovshchina step, the dovzhina march, the size of the maidanchikiv and the outside walls, the kut of the march, the parameters for tying and kosourіv with the necessary program armchairs. Also, it will be indicated the number of reparations in the formula of transparency and recommendations for changing the duration of the descent opening and the size of the trees.

Mayuchi all data, for the help of other services, it is possible to obtain materials for the skin kosour, traction, central support zagalnu area sablіv.

After that, it is possible to develop the versatility of the assembly, health care work and materials, now we should designate the type of wood for all wooden elements. Delivery of materials is not included before the calculation. It is necessary to be sure that the art will be more approximate, but it will help you to look at material possibilities. As much as the sum is significant for the namіchenu, then let's take a look at other projects.

Shards of the servants of the programs are waking up, not all of them see the chairs of that scheme. But it does not matter to know the one that will propagate the maximum information. Otrimani when calculating data, it is better to look at some sites.

Variants of descending to another on top of a private booth: how to make a sing of a screw, a screw, a circular tree, go metal do-it-yourself economy class - video, open for going to 2 over - armchairs, scheme, dimensions (width), photo, price, dimensions online

Advice
sent.

As you allow space, the twins can be made wide.

Gvintov descend can be decorated in any style: classic, ganbi-tik, art deco, modern, etc. But you didn’t choose any bi style for the interior, so go and see in whatever place and the lights of your design become the color of the booth. In addition, it is even more functional and practical at the stosuvanni. Gvintovі go to the other on top save space and allow you to win the vertical space as efficiently as possible. It is suitable both for small places, and for the expanse of bays. Spiral structures changed over time with a sultry look represented the essence of the era. Easy and mіtsnі descend, vikonanі z new materials, came to replace the classic wood and stone middle ones.

Options for the design of spiral descents

This design, without a doubt, will become one of the key elements of interior decor. For її preparation, different materials can be used: traditional wood, hardwood or plastic, forged iron, natural stone. The choice of material is influenced by the cold style, the planning of the application, the necessary functionality, as well as the shortest brewing capacity of the finished product.

Structurally, it is possible to see the following types of screw convergences:

Fallow in the form of colorful interiors, you can walk around the stone, make it with colored plastic or ceramics.

Vіdminnі rice

The advantages of round descents lie at the offensive:

• roztashovuyuchis on its own axis, such a design takes up significantly less space and secures the shortest path to another over
• the price for a twine descend, as a rule, is lower, the lower price for a march
• go around, for the singing navich, you can mount it with your own hands
• The impersonal design options give the opportunity to install in the premises, descend, which suits the interior as much as possible.

Visible waters can be called:

• foldability of shifting along nіy, zvajayuchi on the value of the steepness of the descent,
• the presence of inter-progon maidanchiks for the purpose of making such constructions unhandy for people of a frail age or a sick person;
• it is easy for children to walk along narrow ridges;
• it is difficult to move to another over important oversized speeches.

Please!

In order to make the transfer of safe descents with guillotine descents, to install lighting of the descents. It is important to reduce the possibility of falling, especially at the dark hour of the day.

Recommendations for the occasional installation

Choice of twine descents - on the right to finish individually. Tim is not less, there are some nuances, as it is necessary to know for any kind of mood. So, for a practical and safe spiral design, it is necessary to protect the coming moments.

1. The steps that can be taken into account are the most important in operation expand:

• the depth of steps at the support stand is not less than 10 cm;
• maximum width no more than 40 cm,
• the depth near the middle of the chablis is about 20 div.

1. The height of the passage is over two meters to allow people, whether of any size, to move comfortably.
2. When choosing a place for strengthening the support, it is necessary to choose such a maidanchik, which can show the great mass of the structure itself and want two people.

Please!

If you spread the gatherings of the troch with an overlap, then the solemnity of the construction is the essence of growth.In addition, it is recommended to dodatkovo zmіtsniti, having installed the bracket between the front part and the back part of the two susіdnіh shablіv.

Opening preparation before installation

The best option is to prepare an opening for future gatherings at the stage of everyday life. In this way, it is possible to design the necessary electrical connections, as well as to ensure the supply of darts, pipes for various communication systems at the city’s future opening.

If you do not open the transfer before the hour of everyday life, then before the installation of the structure, it is necessary to do some preparation. At the stele to fight open the required area of ​​the form. Yogo minimum size guilty of rozrakhovuvatisya vikhodyachi z the diameter of the descent, increased by 20 cm. Relatively preparations will open the door for easy and fast installation of the structure.

Ready otvir can be decorated in any way. For wooden gatherings, it is recommended to veneer it with a beam with round veneer. The beam is made from a few balls of veneer bent for additional stops and a steel circle. The Yak_st of the beam will be great, as if after gluing the skin ball to the veneer and dry it well. Ready to insert the beam at the opening and fasten it with end caps. As decor, plinths are mounted. The improvement of a straight-cut opening is simpler through the presence of round parts. You can read a report about the installation of twin descents with your own hands.

Materials and storage parts of the finished product

Ignorant of the appearance of faceless daily everyday materials, wooden structures are overwhelmed with demands. The stench can be made from wood or combined with metal, scrap, plastic. Be aware of the materials, which are most often vicorated for the preparation of various structural elements.

• The most comfortable at vikoristanni є railings from the village. The tree is not stronger before heating, or cooling down, so the wooden objects are acceptable to be touched for whatever temperature in the room. The railings are mostly made from pine and oak. The color scheme is rich, however, so that the structure of the tree was visible, zastosovyt covered with stain or varnish. One place, derev'yanі railings are not recommended to be installed - a street. For the presence of folding turns in handrails in fenced structures, PVC is used as the best material for railings. Vin is easier to swell in a bent shape and does not require additional sticks.

The compact design of the twin descents ideally fits in one's own lightness and insignificance, to introduce an element of originality and innocence into the interior, at the same time having a low, practical and applied advantages.

Let's take a look at the technology of attaching twine gatherings, what kind of material to beat, how to polish it, how to make structural elements.

Pluses

• In the first place, the twines do not take up a lot of space, the shards of the stink are scattered around the special support and seem to “hang” by the window. In times furnished area vagomic argument. Enough 1.5 sq. m for the installation of such a design.

• In another way, the number of couples' descents is less for the price of the wages.

• Thirdly, to complete the clumsy principle of preparation, it is absolutely necessary for the mother to learn how to use that tool, but as a whole it is possible to work self-taught.

• Fourthly, the effectiveness of victoriousness in high-quality houses in apartments, when there is no intensive movement of people, you can calmly rise to another overhead.

It is important in case of memory, that the ribs of the twine construction are not too wide and, with a steep foot, it is not safe. Therefore, it is recommended to walk on such a dispute not too fast and follow the rules of caution. You can compensate for this shortfall by controlling the handrails. More importantly, the exact design of the rozmіrіv descents and zokrem of the outside stones and the width of the tread (horizontal surface).

As a matter of fact, if you want to wint, go for a booth, if you want to become a host component, you can and independently, mindful of the nuances that the principle of meaning may have:

1. For a comfortable working environment, professionals should ensure that the width of the span is not less than 100 cm, while the width of the structure goes out more than two meters, for mind, what a support, what you carry, and a diameter of 20-50 mm.


2. Inexpensive and at the same time the best option, which is one of the widest, the design is important, if the gatherings are fixed on a support, which they carry, and screw handrails with balusters.


3. Another design, with bent-glue handrails, fastened to them with descents and comirs without support in the center, significantly more expensive and require more windows.

Taken at the horizontal plane of the descent of the gwent, it can take the form of a stake or a bagatokutnik (if the structure is found to be white). To set up gatherings, to roam at the wall, to prepare bookmarks for distant installation.

What materials to win for the preparation of quintet gatherings?

According to the selected material, it is necessary to lay down the value and durability of the comings. As the main load-bearing element of the structure, the pipe is an asbestos-cement or metal pipe; Sometimes, when preparing the support, you can put a ceglu, concrete, a stone or a tree.

Handling from hard wood, metal, it is possible to combine them with stosuvannya. The Crimea of ​​traditional beech, oak, ash and metal gatherings these days often grow into glass or plastic slabs.

With the help of the achievement of reliability, reliability and advancement of security, the following recommendations are made:

1. Screw design, which has an inner edge of the horizontal plane, which is free, changing the insecurity when climbing and descending a narrow part of the steps. A similar option is called gatherings without a vertical plane, and the stench may be more evidence of safety.


2. Re-dressing with gatherings sounds in the middle of the slabs, it is recommended to work them with a width of about 20 centimeters. Even in 15 divs in the central support, the width of the slabs may be not less than 10 divs.


3. Dovzhina schablіv fallow due to recognition of descents. At the same time, it is possible to have a size of 0.6 m with a diameter of 1.4 m.


4. During the rozrahunka of the design data, it was necessary to transfer, so that the height for the passage of the people ensured the possibility of moving with an advancing turn, so that it would become close to two meters.


5. For the central support, it is optimal to use a thick-walled metal pipe (with a diameter of about 50 mm), which gives all the necessary design features. The support is guilty of being installed exactly vertically, and the point, on which it spirals, is guilty of the mother building to bear all the pressure.


6. With a wooden covering, a vertical strut is mounted behind additional anchor bolts and necessary reinforcement. Possibility of fastening with a track, pouring concrete from zastosuvannya braces.


7. To close the slabs on the central stand, drill the opening from the narrow side of the slabs with a diameter that is equal to the diameter of the stance. Skhodinki are installed behind the help of bushings, their height can be the same as the height of the vertical plane. Horizontal planes and bushings must be laid with washers to protect the tree from deformation. The expansion of the bushings should be expanded, adding the expansion of all washers, otherwise the height of all the spacers should be larger for the front data.


8. Dovzhina shablіv directly spіvvіdnositsya z rozmіrom otvoru v rekriti, as the number is taken away, dividing the height of the descent into 18-20 divas (stand between the feet), not forgetting to add the thursday of the descents.


9. For this construction, the steps are laid with a small overlap on the front and fixed with a bracket, which is placed between the summary edges of the descents at their wide part.

Installation of screw descents

The stacking of the screw descents is carried out in the following sequence: the installation of a load-bearing strut, the installation of treads and bushings in the required order. Further, follow the installation of shackles, vrakhovuyuchi їx more precisely at the beginning and end of the position, in the end the brackets are fixed. The installation of the fixings of the upper stage is being completed until the ceiling is closed. Just put up railings and build handrails.

Rozrahunok of twins' gatherings - armchairs and schemes

Gvintov descend with your own hands - video instruction for selection

Get off the wood of twine.

Private life can be a small number of options for catering as soon as possible. However, there are such ups and downs, with any one possible exit, the creation of twisted descents to another on top. Such constructions of the cistern seem to look like a technical solution, and to establish an aesthetic value.

See the construction of the screw descents

The originality of the design of the twine convergences and the diversity of their design, as well as the stasis of the materials, scatter from a simple attachment for moving between the tops of the right vitver of the art. In general go screw pod_lyayutsya on such a look:

• The poles are hovering at the looking wedge, the wide end of them rests on the wall, and the narrow end is attached to the central column and descends or to the stovp. Yogo is prepared from a stone, the villages or the wines are settled with parts of saplings to sweat. To fix it to the wall, the doctors will stop. Options for building with a wall of stones can be spiral traction or kosouri.

go

• Up to the central stovp, chablis are installed cantilevered. So go and roam around the walls and away from the walls.

Chablis come to the central stovp

• Support stovp vіdsutnіy. How to support the pull, how to make a spiral configuration, and step by step to move into the support railing. This variant of the vikonannya descent is the most foldable, and yet it is breathtaking with its beautiful beauty.

Bowstrings - supporting structures

• The central stovp is, most often, a pipe, as it is made from steel or asbestos cement. This is the traditional version of the construction of twine descents, which is inspired by simplicity and superiority.

Support stovp іz pipe

Get your hands off the tree with your own hands, or metal under the strength of the people, as you can use the basic skills of work with these materials.

For and against twins

When choosing the type of twine gatherings, the main characteristics should be taken into account.

The positive aspects of such constructions are:

• less rozmіri porіvnya z march gatherings;
• more comfortable moving with gatherings, lower with more comfortable layouts of attached models;
• the original view of the descent into the interior of the house, the possibility of stosing different design solutions;
• available varіst virobu. Simplicity of design and change in materials. Due to the smaller dimensions, the fees for sporudzhennya descents are reduced.

Before negative sides round meetings can be seen:

• foldability, and deyaky vypadkakh і vіdsutnіst mozhlivostі move objects, especially, as the stench may have significant dimensions;
• lowering the singing peace of comfort when moving, especially when descending. Pardons at the design office can cause injuries.

Rozrahunok of twin descents

Rozmіri quintov descents. Ergonomics rules

It is practical to report about those who are moving safely in operation, apparently up to її geometrical comparisons of averaged data about the width of the crop and the length of the foot of a person. That is why ergonomics is to blame for the development of the design of the drabins.

Standard sizes of stems

In width, you can get off safely without crossing the passage of one person, which should be at least 800 mm.

The width of the gatherings is taken between 250-300 mm. Please note that the tread should be 280 mm. This parameter significantly contributes to the comfortable and safe descent by gatherings. With a width of less than 250 mm, there is an increase in injury prevention under the hour of operation of the exits.

Scheme of twists

The riser may be tall, so that it can be found in the boundaries of 150-200 mm, which is better for people. Shchablі, scho mayut height less than 150 mm, lead to discomfort shifting gatherings, so that the person will be stunned to work more than krokiv. In times of greater heights, difficulties are blamed for pidyomy, especially for people of a frail age and children.

A drawing from the appointments

Kut Nahilu

Nakhil descent may become 30-40 degrees. The design, which has a larger buff, can bring non-handiness with a twist, and with a smaller kut, it will require more space. It is necessary to protect the Crimea, that at different circular gatherings, at the process of rising gatherings, which are located on the mountains, they can be ruffled over the head. After looking at the surroundings, the next design is to go so that the bula is safe. It is important that this parameter can become 170 mm.

Krіm tsgogo it is necessary, so that the number of chablіv was unpaired, and the handrails were small in height 900-1200 mm, which allows you to safely win the descent of a person of average height.

Appointed recommendations may be taken to respect at the design stage of life. If it’s necessary to arrange a twine, go to a prompted booth, then you’ll be able to take advantage of the improvement of obvious places and under the old rules of ergonomics.

Geometric rosary

Prior to the holding of the rozrahunkіv descents with their own hands, they followed the rozіstsem roztashuvannya entry and roztashuvannyam exit on the oncoming equal day. It is important to lie to someone, that it is impossible to allow a situation if a person is put in front of his head in a bed.

Rozrahunok

To determine the number of trees, it is necessary to divide the height of the place by the height of the trees, which is recommended. With any trace of memory, scho їhnya kolkіst is guilty of being unpaired. If the result is not taken away, it may not be practical for practical zastosuvannya, then further calculations are calculated by the method of selecting the height of the steps at the permissible boundaries for improving the ergonomics.

When expanding the width, it is necessary to remember that the movement of the people moves from the front to the center of equal 2/3 of the width. To that, a person should do it, that you need a double stake with a radius of Lx2 / 3, de L is the way of a person. Vykhodyachi zgogo, the new way of moving people is marked by gatherings. Knowing this value, it is necessary to divide it into number of letters, and in the form of number, like a viide, it is considered to be alone.

In times where the value is within the allowable limits, її accept. As a rule, it is rare to go out. Therefore, I will renew the method of selection of geometric dimensions, vrakhovyuchi with the recommended value and the rules of ergonomics.

Preparing the twins

Select material

Zastosuvannya metal as a material of convergence gives the possibility of rozashuvannya її beyond the borders of everyday life. Constructions, made of metal, are high-pitched and nasty, creamy stench of a stalk to a blast of fire. Metal is a versatile material that can be combined with various materials. When zastosuvanni in the metal screwed gatherings of forged elements, the remarkable design gains lightness and thinness.

Get off the metal

The largest width when preparing the descent of the nabula. To whom to spriyat the versatility of which material, the superiority and durability is sufficient.

Gvintov descend from the tree

In addition, the carved details will give an extravagantly attractive appearance to the interior. Obov'yazkovymi minds with vicarious wood for the construction of twine assemblies - the need for relay grinding of all surfaces and special processing with lacquer-farb materials.

Zastosuvannya concrete during the installation of screwed descents will allow the creation of ground spores, which may mean materiality and durability.

The incombustibility of the material contributes to fire safety. Aesthetics of the case is rarely compromised by vikonanim from wood and metal to analogues.

Get off the concrete

Installation of screw descents

Before that, how to grow a twine, go with your own hands, follow the vikonati to need a rose. There are no exact values ​​for the design details, however, it is the responsibility of the ergonomics of the convergences to be taken into account.

Having distinguished yourself from the details and all the arguments, proceed to the preparation of the elements of the dispute. For which one is selected, its quantity is to be carried out in front of the layout. For the preparation of some of them, you will need special typesetting and advanced training, which surrounds the singing world with the possibility of their independent production. In the process of preparing the slabs, the next step is the drilling of the openings. From the narrow side, the stench is necessary for fastening with a stalk, and from the wide side, for the installation of handrails.

We followed the process of installing the rack. For whom a metal pipe will be needed, the size of which is due to the dimensions of the structure. Fastening її zdіysnyuєtsya for additional anchors. To blame sumnіvi krіplenya in such a rank, the base of the pipe can be poured with concrete at the bottom.

Installation of screw descents

After the installation of the central rack, a bushing is pulled on it, so that the diameter is large. Then we put the puck on the metal, and then we get together in it. The process is repeated when the advanced stage is installed. The bushing and the washer should be easily folded to the required height.

Another point of support for gatherings will be hung with a baluster and handrails. In the opening of the wide part of the meeting, a baluster is installed, which is fixed behind an additional flange. In a similar manner, the installation of advancing shablіv is to be carried out.

At the completion of the installation of the screw descents, it is necessary to fix the baluster with the railing. For which vicory, decorative nuts are used.

Other options for installation technology

For the preparation of the central stovp zastosovuetsya steel pipe, Until the heel is welded for support. For the form, it is recommended to make a round heel, and open it in one opposite one. Before the spadix of the structure, the next step is to expand and prepare the surface of the underlays for the anchoring of the anchor.

View of the beast

Material for tiles can be profile pipe or else, as an option, a metal little piece. The most convenient way to assemble the assemblies is to prepare all the templates, after which proceed to their fixation on the stovp. With this technology, it will be simple: having prepared one gathering, start to reconcile for the job, as if you don’t blame problems, then proceed to the foreground of others. Іstotno simplifies the folding work and the front layout with the exact design of the layout of the details in the space. Farther away, the zvaryuvannya descended from the support of that fixed side for the support of long pipes, as if to become part of the parapet.

Dali v_dbuvaєtsya sheathing structures with wood. In case of vindication of the folding process with a supporting stovp, it is possible not to sheathe other details to create a harmonious look of convergence. After that, the lining of the handrails and the exits are installed.

Lakuvannya and furbovannya є final robots for the preparation of twisted descents. It is also planned to introduce decorative elements into the design of the structure, which should be worked up to the sheathing.

As a material, the best material is oak or beech. Not recommended for pine trees.

It is necessary not to allow the presence of knots on the tree. The presence of knotty is not acceptable when preparing saplings.

When choosing constructive solution go, don't need to tighten yoga. The most simple design is the guarantee of the distant implementation of the project under vikonannі yogo vlasnoruch.

As a result, the folding of the obov'yazkovoy umovoy є zbіg rіvnya pіdlogi upper on top of that remaining gathering.

Minimalism in style

Photo of twin descents in the interior

As an example, you can marvel at the collection of photographs of the quintet gatherings in the interior.

Gvintovo go to the museum (Vatican)

Chic Gwent Go

Mirror expands the space

classic style

Gvintov on top of a private booth is one of the most practical and functional interior solutions. Aesthetic design resonates with ergonomics and efficient operation in large and small spaces. Gvintov go and watch the basic or author's project. The author's zrazki are inspired not only by the luxurious design, but by the reduced configuration. All about the twins, go, as well as 30 photos of the most successful stories - marvel at the statistics.

"Marshmallow Spiral" - I myself want to call it "Gvint"

Namely stylish, concise and functional

Gvintov go: podіl on atomy

Get off with a screw - this is a functional design of a folding form, which attaches respect from the first seconds. It is made up of external wedge-shaped slabs, which are laid out under a special radius, supporting elements and handrails. The support system for twin descents є:

• pull;
• central stovp;
• doctors;
• bearing wall;
• spiral-like stringers;
• stand.

Another butt of handy descents under the great kut

A practical variant of the family type

Gvintov go in eco-style

We prepare a construction from wood, metal, a set of concrete elements and a combined material. It is possible to install a screwed gangway in the center of the place, because the construction does not vimage the bearing foundation at the visible vertical plane.

How can you go?

See the twists

In private booths, you can see several twisted ascents: with wedge-shaped ascents, without supporting walls on a cantilever installation, metal (leader of twisted assemblies), based on spiral-shaped pulls. The rest of the construction is the latest, but the flooring is original. It looks not so much functionality, as a designer's creativity.

Kut - a designated place for placing "gvint"

Nothing zayvogo

The most adequate price for such a get off is close to 47,972 rubles

A classic of the genre of the 19th century - all the twins descend from wedges and closed handrails. The support of the wide end of the skin stage is placed on I am carrying a wall and a vuzky end of trials with a supporting stovp. The rest can be formed like the foundations of the slabs themselves at the narrowest part, so be vikonanimous whole masonry. So go to the riverside in the open spaces of light mansions, for those who take a lot of space and win from simple, simple materials.

Super-original twint descend from the oak massif

Go console type - an extraordinary solution for interiors in modern, high-tech, fusion and other styles. Such a design transfers autonomous installation of exits on a monolithic support stomp. Even more extravagant transformation of the interior does not start to look at the practicality of the victorious. Gvintov descend to this type to be more youthful and energetic couples with a creative character, which are declining minimalism, lower sim'yam.

Namely fresh - a classic style

Ethnic style in modern interpretation

Metal twins descend - one of the most far-reaching, practical and rational solutions. Advantages richly: the ability to change the smallest design and shape, durability, superiority, ergonomics, quick installation. Most often, as a bearing base of all constructions, there is an internal haircut, the thickness of the walls of which is not less than 50 mm.

Metal screws descend with forge elements

Kitchen in a clean look

Forged "gvint" in details

Vіdmіnne stylistic decision

Metal construction "under the microscope"

The most foldable structures are based on spiral-shaped pulls. Fastening shablіv at tativi smoothly move at the railing. There is a resentment of the "perfected pidyoma" for the eyesight of the visible reinforcement. The number of such descents to the other one over the top is more than 100,000 rubles without fixing the installation, which is different, no less folding.

Yaskravy butt of similarities on the basis of spiral-like drafts

Uniquely forged design - the reception of the guests of the mansion

Porada: For more profitable design, go to the stage of building a booth. Such a time does not happen to beat the space. It is possible to think over the zoning of the place, the installation of gatherings and the recognition of the lower Maidan.

Technical features

If you know that you are indecently known in everyday life, if you have little practical knowledge, then all the same, you are responsible for understanding that the profile fakhivets is responsible for designing screwed descents on top of another. It is necessary to pay attention to the peculiarity of the accommodation, the comradeship of the walls and the unbearable vanity, to designate the correct cut for the turn:

Schematic little baby with accessible technical equipment

Turning off the prestige - an ideal solution for narrow gaps. Technical baby from a changed configuration

1. Kut turn in the range of 270-360 degrees.
2. The height of the stele is 2 meters.
3. Priority is given to the spiral-like form of the twisting of the protagonist's arrow. This is explained by the start of the movement from the right leg of the poor.
4. The width of the wedge of the step should not be less than 400 mm on the wide side and 100 mm on the narrow side.
5. The diameter of the step support with a gap of 2-5 div.
6. The height of the interstage space for the standard to become 180-200 mm.
7. Gvintovy pidyom at the average borrowing area of ​​2 m-2.3 m.

Technical baby for accessible visualization of the butt

In order to avoid injuries, it is better to convey the presence of the railing. It is important and dotrimannya heights of convergence and the width of the tread. Remember that you go under a lesser kut to take more strength, but less than an hour. If children live in a hut - next to install a railing of a closed type.

Get off the bagatokutnі gvintovі - armchair that scheme

Stylish, practical, smart!

Materials

Following the standard of twins, descends are made up of three main parts: gatherings, railings, supports. All details can be made from one material and combined warehouses. The support system can be folded from:

• stone;
• cast concrete;
• ceglini;
• asbestos-cement tube;
• metal;
• steel;
• villages.

Chotiri luxury design as a classic style

It is more often necessary to work out combinations of zastosuvannyam: metal (for the frame), rural villages, reinforced warehouse. For the preparation and installation of vicorist metal, plastic, solid wood, beech or oak. Rarely shambles wriggle out of the concrete-assembly bag. How to securely fasten these elements with a vicorous coupling, zvaryuvannya or reinforcing bolts.

"Vint" in the interior

Irrespective of the coldness of the weather - the atmosphere is incredibly warm and calm

The popularity of these gatherings is due not only to the ergonomics and the extraordinary design, but also to the reduction of interior completions. Vitoncheni and smart design designs far away podkreslyuyut like a rich interior, so and yogo minimalism.

Such a similar construction does not dominate the space, it is better for everything, adding yoga

Gvintov descend buildings drastically change the visualization of space. In order to create a light, unflappable atmosphere, a steadfast sense of freedom, it is necessary to place a stake on the glass slabs of the railing near the metal-plated building.

Masterpieces of inlaid array

For zam_sky mansions more p_d_go metal structures with forged elements and inlaid with massive elements. Gvint villages descend successfully to add eco-style, hi-tech, country.

Vitality and elegance were angry together

Gvintov descend with closed-type railings that make a pastel spiral, miraculously combine with themed consoles and living quarters. For the art style, zastosovut bright one day glassy shablіv - practical and chic.

You can choose a practical configuration, expand the design and get started at low prices in Moscow on the site "Super Go". Using the calculator's visibility, you can recognize the orientation of the design in a few clicks.

Thank you for the look and feel that 30 photos of the plots helped you figure out the design of the gatherings at your booth.

Dali

8 stages in the preparation of wooden exits that lead to another on top of a private booth 50 photos of going to another on top of a private booth 5 tips on how to choose go to another one over a private booth 5 original ideas go to a private booth on top of another Best photo, designs that wooden chairs descending to another on top of a private booth